{"product_id":"cranked-hgv-wheel-guides-1800mm-pair","title":"Cranked HGV Wheel Guides 1800mm - Pair, Galvanised or Yellow, 139mm or 168mm Tube, Bolt-Down Loading Bay Trailer Guides","description":"\u003cp\u003eEvery loading bay has the same weak point: the last few metres of a reverse, when the driver is working off mirrors and the trailer has to land square on the dock. These cranked HGV wheel guides give the rear wheels a solid steel kerb to run against, one either side of the bay, so the trailer is steered straight in rather than corrected by the dock buffers, the door frame or the next vehicle along. Each guide is 1800mm long, stands 320mm high and is sold as a pair, one left-hand and one right-hand crank. Choose plain galvanised or galvanised with a yellow powder coat, in 139mm or 168mm tube. They are made in Britain and bolt down to a suitable concrete surface.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA gentle 15° crank, not a hard stop\u003c\/h3\u003e\n\u003cp\u003eThe entry end of each guide is cranked outwards at 15°. That angle is shallow enough that a tyre wall arriving off-line is nudged back towards the centre of the bay instead of hitting a blunt end. As the trailer reverses further, the straight 1800mm run keeps the wheels parallel to the bay all the way back towards the dock.\u003c\/p\u003e\n\u003ch3\u003e320mm high, at tyre-wall height\u003c\/h3\u003e\n\u003cp\u003eAt 320mm installed height the tube meets the sidewall of an HGV tyre, so the wheel is guided by its tyre wall rather than by the trailer bodywork.\u003c\/p\u003e\n\u003ch3\u003eThick-wall tube on wide plates\u003c\/h3\u003e\n\u003cp\u003eBoth diameters use 5mm wall tube. Each end lands on a 250 x 250 x 10mm square plate taking four bolts, eight per guide, so side load from a wheel is spread across two well-separated fixing points. The pair weighs 76kg in 139mm tube and 100kg in 168mm.\u003c\/p\u003e\n\u003ch3\u003eGalvanised under the colour\u003c\/h3\u003e\n\u003cp\u003eThe steel is galvanised mild steel. The yellow version is powder coated over the galvanising, so if a tyre scuffs the paint the zinc layer underneath still protects the steel.\u003c\/p\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThe main use is at HGV loading bays and dock levellers in distribution centres, cold stores, parcel hubs and manufacturing sites, where trailers reverse onto a dock many times a day. The same guides work at roller-shutter goods-in doors with no dock, along vehicle routes inside large sheds, and in front of racking ends, plant and machinery that forklifts and delivery vehicles pass close to.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1800mm per guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight (installed)\u003c\/th\u003e\n\u003ctd\u003e320mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube diameter\u003c\/th\u003e\n\u003ctd\u003e139mm or 168mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrank angle\u003c\/th\u003e\n\u003ctd\u003e15°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase plates\u003c\/th\u003e\n\u003ctd\u003e2 per guide, square, 250 x 250 x 10mm, 4 holes each (Ø18mm on the drawing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eBolt down only. 8 x 16mm bolts per guide, not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGalvanised mild steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised, or galvanised plus yellow powder coat (RAL not published for this line)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight per pair\u003c\/th\u003e\n\u003ctd\u003e76kg (139mm) \/ 100kg (168mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003ePair: 1 x left-hand crank + 1 x right-hand crank. Price is per pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGuarantee\u003c\/th\u003e\n\u003ctd\u003e12 months, if installed and used correctly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt grade \/ embedment, galvanising standard\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFinish.\u003c\/strong\u003e Plain galvanised suits most yards and gives the lowest price. Choose galvanised and yellow where drivers need a clear visual target, such as poorly lit bays, night working, or sites already marked out in yellow. You get the same galvanised protection underneath.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTube diameter.\u003c\/strong\u003e The 139mm tube covers routine dock work. The 168mm tube is a bigger, heavier section, 100kg a pair against 76kg, for bays that take more knocks: high-traffic distribution sites, shunter-operated yards, or places where guides have been bent before. Height, length, crank and plates are the same for both sizes, so you can mix them across a site without changing the layout.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use \u0026amp; care\u003c\/h2\u003e\n\u003cp\u003eFix to a sound concrete surface using eight 16mm bolts per guide (sixteen per pair). Bolts are not supplied, so add suitable fixings to your order. Set the pair either side of the bay with the cranked ends facing the yard and the straight runs leading back to the dock. Mark out the spacing to suit your trailers and dock layout before drilling. Check bolts are tight after the first weeks of use and at routine inspections. Touch up any damaged powder coat on the yellow version.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs the price for one guide or two?\u003c\/h3\u003e\n\u003cp\u003eThe price is for a pair: one left-hand and one right-hand cranked guide, enough for one loading bay.\u003c\/p\u003e\n\u003ch3\u003eAre bolts included?\u003c\/h3\u003e\n\u003cp\u003eNo. Each guide needs eight 16mm bolts, sixteen per pair. Choose anchors that suit your concrete; we can advise on suitable heavy-duty fixings.\u003c\/p\u003e\n\u003ch3\u003eCan they be concreted in instead of bolted?\u003c\/h3\u003e\n\u003cp\u003eNo. This model is bolt-down only, with two square base plates per guide fixed to a suitable concrete surface.\u003c\/p\u003e\n\u003ch3\u003eIs the yellow version still galvanised?\u003c\/h3\u003e\n\u003cp\u003eYes. The yellow powder coat is applied over galvanised steel, so the steel stays protected if the coating is chipped.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering \u0026amp; delivery\u003c\/h2\u003e\n\u003cp\u003eEach pair is 76kg or 100kg, so delivery is arranged as a heavy item to a site that can receive it. For several bays, site delivery questions or matching fixings, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your quantities and postcode, and we will confirm lead time and delivery.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Galvanised \/ 139mm","offer_id":63317870707075,"sku":"ISC-CWG1800-G-139","price":1434.9,"currency_code":"GBP","in_stock":true},{"title":"Galvanised \/ 168mm","offer_id":63317870739843,"sku":"ISC-CWG1800-G-168","price":1967.9,"currency_code":"GBP","in_stock":true},{"title":"Galvanised \u0026 Yellow \/ 139mm","offer_id":63317870772611,"sku":"ISC-CWG1800-GY-139","price":1587.9,"currency_code":"GBP","in_stock":true},{"title":"Galvanised \u0026 Yellow \/ 168mm","offer_id":63317870805379,"sku":"ISC-CWG1800-GY-168","price":2074.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-cranked-hgv-wheel-guides-1800mm-loading-bay.jpg?v=1794994929","url":"https:\/\/industrialsuppliesco.co.uk\/products\/cranked-hgv-wheel-guides-1800mm-pair","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}