{"product_id":"arrowhead-gate-catch-with-clash-plate-155-x-50mm","title":"Gate Catch with Clash Plate 155 x 50mm, Arrowhead Catch on Steel Angle Plate, Raw Finish","description":"\u003cp\u003e\u003cstrong\u003eAn arrowhead catch on a steel angle plate for gates that need a two-way catch and a stop.\u003c\/strong\u003e The arrowhead nose guides the latch bar up and over and drops it into the notch behind the head, while the angle plate behind it acts as a clash plate that the gate meets as it closes. The plate is 155mm long and 50mm wide, with two fixing holes, so you can weld it to the post or bolt it on with fixings to suit. It comes in raw steel and is ready to finish with the gate. The price shown is for one catch, with a minimum order of 10, because these are normally fitted across a batch of gates.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/arrowhead-gate-catch-with-clash-plate-155-x-50mm-drawing.jpg?width=1200\" alt=\"Drawing of the gate catch with clash plate, 155 x 50mm, showing the angle plate, arrowhead and two fixing holes\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this part works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA catch and a stop in one part.\u003c\/strong\u003e The angle plate gives the gate something to close against, so the catch is not the only thing taking the impact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits two ways.\u003c\/strong\u003e The fixing holes let you bolt the catch on, or you can weld it directly to the post if you prefer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eArrowhead nose.\u003c\/strong\u003e The tapered head gives the latch bar a clean run up and over, and its plain shape suits traditional and workshop-made gates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaw steel ready to finish.\u003c\/strong\u003e It takes paint, powder coat or galvanising along with the rest of the gate.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eYard gates, driveway gates and pedestrian gates on steel or heavy timber posts, where you want a two-way catch and a positive stop in one fitting. It suits gates made in the workshop as well as replacement of a worn catch on an older gate. It is a holder for a latch bar, so the latch itself is a separate part.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne catch on its angle plate, minimum order 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate length\u003c\/th\u003e\n\u003ctd\u003e155mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate width\u003c\/th\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate thickness\u003c\/th\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle leg\u003c\/th\u003e\n\u003ctd\u003e83mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArrowhead\u003c\/th\u003e\n\u003ctd\u003e60mm high, projects 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, 6mm, at 110mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw steel, paint or galvanise after fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eWeld or bolt to the post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatch\u003c\/th\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.78 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose this catch when you want a two-way latch and a stop for the gate to close against, in one fitted part. A flat two-way plate on its own is lighter and cheaper if the post already provides a stop. For a one-direction catch, a simple keep will do. The heavier 200mm hooked latch, listed below, works well with a catch like this on a larger gate.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou want\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCatch and clash plate, 155 x 50mm\u003c\/td\u003e\n\u003ctd\u003eThis catch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA smaller clash plate, 70 x 45mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-gate-catch-clash-plate-70-x-45mm\"\u003eGate catch clash plate, 70 x 45mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA hooked latch bar, 200mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-gate-latch-200mm\"\u003eHooked gate latch, 200mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA complete latch kit to weld\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-scroll-end-gate-latch-kit\"\u003eScroll end gate latch kit to weld\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eOffer the catch up to the post with the gate closed and check the latch bar lines up with the notch behind the arrowhead, and that the gate meets the angle plate squarely. Mark and drill the post for the two fixing holes if you are bolting it on, or tack and weld it into place if you are welding. Check the latch runs over the head and drops in from both sides before finishing.\u003c\/p\u003e\n\u003cp\u003ePaint or galvanise the catch along with the gate. Keep the nose and notch lightly greased so that the latch can run smoothly, and check the fixings during routine maintenance.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one catch?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one catch with its angle plate, and the minimum order is 10. If you need a larger quantity, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the latch included?\u003c\/summary\u003e\u003cp\u003eNo. It is the catch and clash plate only. You need a separate latch bar to go with it.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it be bolted on?\u003c\/summary\u003e\u003cp\u003eYes. It has two fixing holes at 110mm centres. It can also be welded directly to the post.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it work if the gate swings both ways?\u003c\/summary\u003e\u003cp\u003eYes, the arrowhead shape guides the latch from either direction, which is why it is used on two-way gates.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254353412483,"sku":"SSHF-229251-01","price":5.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/arrowhead-gate-catch-with-clash-plate-155-x-50mm-in-use.jpg?v=1794142096","url":"https:\/\/industrialsuppliesco.co.uk\/products\/arrowhead-gate-catch-with-clash-plate-155-x-50mm","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}