{"product_id":"antique-oak-tone-composite-board-wax-repair-kit","title":"Antique Oak Tone Composite Board Wax Repair Kit, 2 x 10cm Wax Sticks and Applicator","description":"\u003cp\u003e\u003cstrong\u003eAn antique oak tone wax repair kit for touching in chips, dents and small scratches on composite gate boards.\u003c\/strong\u003e A fence or gate gets knocked about by barrows, ladders and delivery trolleys, and a scratch on a capped board is noticeable. This kit holds two 10cm wax sticks in antique oak tone, with an applicator, so you can fill the mark and blend it in with the board around it. The sticks are a muted olive-khaki brown, chosen to go with our antique oak tone composite gate boards. The price shown is for one kit, with a minimum order of 5, so you can keep a spare on site for each colour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e choose by board colour. This kit is antique oak tone. The board each kit goes with is linked in the table below.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/antique-oak-tone-composite-board-wax-repair-kit-drawing.jpg?width=1200\" alt=\"Drawing of the antique oak tone composite board wax repair kit showing two 10cm wax sticks and an applicator\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this kit works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIt is made for the small marks.\u003c\/strong\u003e The kit is intended for chips, dents and small scratches, the sort of minor surface damage that shows up on a gate in daily use. A wax stick fills the mark and leaves the surface level, rather than needing a board to be replaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe colour is antique oak tone.\u003c\/strong\u003e It is the colour of our antique oak tone board, which is a muted olive-khaki brown, so the wax sits close to the board around it. Match it against a clean, dry area of the board rather than a faded one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick to use.\u003c\/strong\u003e The method printed on the pack is three steps: take off any raised edges with the applicator, rub the wax stick over the damaged area until it is level, then take off the excess wax with the applicator. There is nothing to mix and nothing to cure.\u003c\/p\u003e\n\u003cp\u003eIn short: it is for minor marks, in a colour matched to the board, with a three step method.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eOn antique oak tone composite gate boards and fence boards that have picked up chips, dents or small scratches: gates and fences at depots, schools, housing sites and commercial premises, and on handover snagging where a board has been marked during installation. It is for the surface of the board, so it is a touch-up for appearance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne repair kit, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the kit\u003c\/th\u003e\n\u003ctd\u003e2 wax sticks, 10cm long each, and 1 applicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eAntique Oak Tone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit type\u003c\/th\u003e\n\u003ctd\u003eWax repair kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade for\u003c\/th\u003e\n\u003ctd\u003eComposite gate boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDamage it is for\u003c\/th\u003e\n\u003ctd\u003eChips, dents and small scratches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDeeper damage\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eRemove high points with the applicator, rub the wax over the damage until level, remove excess wax with the applicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right colour\u003c\/h2\u003e\n\u003cp\u003ePick the colour of the board you are repairing. This kit is antique oak tone for our antique oak tone composite gate board. Hold a stick against a clean part of the board in daylight before you start, because boards weather and a board that has been outside for years can look a little different from a new one. The six board colours are linked here, so you can see which board each kit belongs with.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBoard colour\u003c\/th\u003e\n\u003cth\u003eBoard\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEbony Black\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/composite-gate-board-2m-ebony-black\"\u003eComposite gate board, ebony black\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThis kit: Antique Oak Tone\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/composite-gate-board-2m-antique-oak-tone\"\u003eComposite gate board, antique oak tone\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Grey\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/composite-gate-board-2m-light-grey\"\u003eComposite gate board, light grey\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTeak\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/composite-gate-board-2m-teak\"\u003eComposite gate board, teak\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWalnut\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-composite-gate-board-2000mm\"\u003eComposite gate board, walnut\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmbossed Anthracite Grey\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/composite-gate-board-2m-embossed-anthracite-grey\"\u003eComposite gate board, embossed anthracite grey\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eClean the board and let it dry. Use the applicator to take down any raised edge round the chip, then rub the wax stick over the damaged area in several directions until it is level with the board. Finish by taking off the excess wax with the applicator and buff lightly with a clean cloth if you wish. Test on a spare board or an out of sight area if the colour matters to you.\u003c\/p\u003e\n\u003cp\u003eKeep the sticks in their pack in a cool, dry place, away from direct heat, and keep the kit with the site tools. Do not expect a wax to restore a board that is cracked or broken through, because the kit is only described for chips, dents and small scratches.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one kit?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one kit with two 10cm wax sticks and an applicator, and the minimum order is 5. If you need more for a large site, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat damage does it fix?\u003c\/summary\u003e\u003cp\u003eIt is made for chips, dents and small scratches. For deeper or larger damage there is no information published for this line, so call us with a photograph before you buy.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it match my board?\u003c\/summary\u003e\u003cp\u003eIt is the antique oak tone kit, chosen to go with our antique oak tone composite gate board. Test it on a clean area first, as an older board may look different from a new one.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it come with the applicator?\u003c\/summary\u003e\u003cp\u003eYes, each kit has one applicator and two wax sticks, 10cm long.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254519185795,"sku":"SSHF-142979-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/antique-oak-tone-composite-board-wax-repair-kit-in-use.jpg?v=1794148180","url":"https:\/\/industrialsuppliesco.co.uk\/products\/antique-oak-tone-composite-board-wax-repair-kit","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}