{"product_id":"adjustable-roller-gate-stop-40-80mm-box-section","title":"Adjustable Roller Gate Stop for 40 to 80mm Box Section, Zinc Plated, Bolt-On","description":"\u003cp\u003e\u003cstrong\u003eA bolt-on gate stop that catches and guides a 40 to 80mm box section frame at the end of its travel.\u003c\/strong\u003e A pressed zinc plated bracket carries two black rollers on flared arms, and the gate frame runs between the rollers until it meets a central buffer. The bracket has a toothed slotted base, so you can set the width to suit the section instead of ordering a different stop for each gate. It bolts down through four 5.5mm holes. It suits box sections from 40mm up to 80mm. The price shown is for one stop, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/adjustable-roller-gate-stop-40-80mm-box-section-drawing.jpg?width=1200\" alt=\"Drawing of the adjustable roller gate stop for 40 to 80mm box section, with rollers, bumper and four-hole base plate\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this stop works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe frame is guided in, not knocked in.\u003c\/strong\u003e The flared arms give a wide mouth. A gate that has dropped or drifted a little still finds the stop and is pulled into line by the two rollers as it closes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWidth adjustment built in.\u003c\/strong\u003e The base slides on a serrated plate, so the same stop can be set to any section between 40mm and 80mm, and it locks where you put it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRollers take the rubbing.\u003c\/strong\u003e The frame rolls past rather than scraping on bare steel, which protects the finish on a painted or galvanised gate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA buffer stops it.\u003c\/strong\u003e The black buffer in the centre takes the impact at the end of the travel, which is kinder to the gate and quieter than steel on steel.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSliding and cantilever gates in light steel box section, where the leaf needs catching and centring at the closed end. Typical sites are commercial yards, car parks and small industrial units. It also suits similar gates elsewhere, so long as the frame fits the section range. Gate weight limits are not published for this stop, so it is meant for light gates, and it is not a substitute for a proper end stop on a heavy leaf.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne adjustable gate stop, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits box section\u003c\/th\u003e\n\u003ctd\u003e40mm to 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003ctd\u003e50mm across the top, 70mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArms\u003c\/th\u003e\n\u003ctd\u003e105mm long, 70mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting face to roller axle\u003c\/th\u003e\n\u003ctd\u003e64mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRollers\u003c\/th\u003e\n\u003ctd\u003eTwo, black, 34mm diameter, 35mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting holes\u003c\/th\u003e\n\u003ctd\u003eFour, 5.5mm, at 26 x 46mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth adjustment\u003c\/th\u003e\n\u003ctd\u003eToothed slotted plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc plated, black rollers and buffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGate type\u003c\/th\u003e\n\u003ctd\u003eNot published for this line. The layout suits a gate frame that runs into the stop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGate weight limit\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.76 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right size\u003c\/h2\u003e\n\u003cp\u003eMeasure the width of the frame section the stop will catch. This stop is for 40 to 80mm box section, the narrowest of our adjustable roller stops. For wider sections go to the 80 to 150mm stop. If you only need a simple end stop that the gate hits, a bolt-down or weld-on plate stop may be enough, and it costs less.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller stop, 40 to 80mm section\u003c\/td\u003e\n\u003ctd\u003eThis stop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA simple bolt-down stop\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-galvanised-gate-stop-100mm-x-80mm\"\u003eGalvanised bolt-down gate stop, 100 x 80mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA weld-on stop\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-fixed-limit-gate-stop-for-welding\"\u003eGalvanised weld-on gate stop\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eBolt the base to the post or foundation through the four 5.5mm holes, with the rollers facing the gate. Slacken the adjustment, set the arms so the frame runs between the rollers with a small clearance, and tighten up on the serrated plate. Run the gate in and out to check it finds the stop cleanly and meets the buffer squarely. Keep the mouth open enough that the gate cannot jam.\u003c\/p\u003e\n\u003cp\u003eCheck the bolts and the rollers at routine inspections, and replace the stop if a roller seizes or the buffer is worn through. A little grease on the roller spindles will keep them running quietly.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one stop?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one stop, and the minimum order is 5. If you need a quantity for several gates, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat size of frame does it suit?\u003c\/summary\u003e\u003cp\u003eIt is made for box sections from 40mm to 80mm. For a section over 80mm, choose the 80 to 150mm stop.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat weight of gate can it handle?\u003c\/summary\u003e\u003cp\u003eA gate weight limit is not published for this stop. It is a light stop for light gates, so do not rely on it to absorb the full impact of a heavy or fast-moving gate.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254498083203,"sku":"SSHF-312579-01","price":15.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/adjustable-roller-gate-stop-40-80mm-box-section-in-use.jpg?v=1794146623","url":"https:\/\/industrialsuppliesco.co.uk\/products\/adjustable-roller-gate-stop-40-80mm-box-section","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}