{"product_id":"316-adjustable-elbow-42-4-x-2mm","title":"316 Stainless Steel Adjustable Elbow for 42.4 x 2.0mm Handrail Tube, Satin","description":"\u003cp\u003e\u003cstrong\u003eA 316 stainless adjustable elbow that bends a 42.4mm handrail to any angle, for tube with a 2.0mm wall.\u003c\/strong\u003e Two knuckle halves turn on an M8 countersunk pivot screw, so one fitting takes the rail from a level landing down onto the slope of a stair, or round the change of pitch at the bottom of a flight, without cutting angled mitres. A 20mm spigot on each end pushes into the tube bore and the body is the same 42.4mm as the tube, so the joint stays flush. The price shown is for one elbow, with a minimum order of 2.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-adjustable-handrail-elbow-42mm-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the 316 adjustable elbow for 42.4 x 2.0mm tube: 20mm spigots each side of a 53.6mm body, 46.8mm from the pivot to the end of a spigot, M8 x 35mm countersunk pivot screw, spigots 38.4mm across with a 34mm bore\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne adjustable elbow, minimum order 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eParts\u003c\/th\u003e\n\u003ctd\u003eTwo knuckle halves with push-in spigots, M8 x 35mm countersunk pivot screw, 316 stainless, satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eThe tube, adhesive or weld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy choose this elbow\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits any stair pitch.\u003c\/strong\u003e Set the angle on site to match the stair, so there is no need to measure and cut angled joints in the workshop, and small differences between flights take care of themselves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlush with the tube.\u003c\/strong\u003e The body is 42.4mm, the same as the rail, so the knuckle reads as a neat part of the handrail and there is no step under the hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade for 2.0mm wall tube.\u003c\/strong\u003e The 38.4mm spigots fit the bore of 42.4 x 2.0mm tube closely, ready to bond or tack weld.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e316 for exposed sites.\u003c\/strong\u003e Grade 316 resists salt and chlorine much better than 304, so this elbow suits outdoor ramps and stairs, the coast and pool surrounds. For dry indoor rails the \u003ca href=\"\/products\/premium-adjustable-elbow-joint-42-4mm\"\u003e304 adjustable elbow for 42.4 x 2.0mm tube\u003c\/a\u003e does the same job for less.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eHandrails on stairs and access ramps in public buildings, offices and schools, and outdoor rails at seafronts, pool surrounds and roof terraces, wherever the rail changes slope.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e316 stainless steel, satin finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e42.4mm tube with a 2.0mm wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003ctd\u003eAdjustable on the pivot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength when straight\u003c\/th\u003e\n\u003ctd\u003e93.6mm: 53.6mm body with a 20mm spigot each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePivot\u003c\/th\u003e\n\u003ctd\u003eM8 x 35mm countersunk screw, 46.8mm from the end of a spigot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpigots\u003c\/th\u003e\n\u003ctd\u003e20mm long, 38.4mm across, 34mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.39 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right elbow?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour job\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail changing slope, 42.4 x 2.0mm, 316\u003c\/td\u003e\n\u003ctd\u003eThis 316 adjustable elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail changing slope, 42.4 x 2.0mm, indoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-adjustable-elbow-joint-42-4mm\"\u003e304 adjustable elbow 42.4 x 2.0mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail changing slope, 48.3 x 2.0mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-adjustable-elbow-48-3mm-x-2mm\"\u003e316 adjustable elbow 48.3 x 2.0mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare 90 degree corner, 42.4 x 2.0mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-90-degree-acute-elbow\"\u003e316 acute elbow 42.4 x 2.0mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRounded 90 degree corner, 42.4 x 2.0mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/90-degree-radiused-elbow-42-4mm-x-2mm\"\u003e316 radiused elbow 42.4 x 2.0mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the tube ends square and deburr the bore. Push the spigots into the two tubes, set the elbow to the angle of the stair and tighten the M8 pivot screw. Then fix each spigot with a structural adhesive suitable for stainless steel, or tack weld round each joint and dress the weld back along the grain. Support the rail until any adhesive has cured.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eOutdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one elbow?\u003c\/summary\u003e\u003cp\u003eYes, one adjustable elbow with its pivot screw, with a minimum order of 2.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhere is it used?\u003c\/summary\u003e\u003cp\u003eMainly where a rail changes slope, such as at the top and bottom of a stair flight where the landing rail meets the sloping rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 42.4 x 2.0mm tube. Use the 48.3mm adjustable elbow instead.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the angle stay fixed?\u003c\/summary\u003e\u003cp\u003eTighten the pivot screw once the angle is set, then bond or weld the joints so the rail is rigid.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 2 or more online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full stair handrail with tube, elbows, brackets and ends, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254264381827,"sku":"SSHF-290499-01","price":47.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-adjustable-handrail-elbow-42mm-in-use.jpg?v=1794137954","url":"https:\/\/industrialsuppliesco.co.uk\/products\/316-adjustable-elbow-42-4-x-2mm","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}