{"product_id":"3-way-adjustable-weld-on-gate-hinge-m20-130mm-eyebolt","title":"3 Way Adjustable Weld-On Gate Hinge, M20 x 130mm Eyebolt, 180 Degree","description":"\u003cp\u003e\u003cstrong\u003eA weld-on hinge bolt for square-section gates, where the setting has to be adjustable after installation.\u003c\/strong\u003e A heavy steel U bracket welds to the post and carries a pinned eyebolt. The M20 thread passes through a 130 x 60 x 12mm slotted plate that welds to the gate frame, with a washer and nut on each side. Move the nuts along the thread to set the gap between gate and post, and use the slot to shift the depth of the gate. It opens to 180 degrees. The price shown is for one hinge, with a minimum order of 4, because these are normally bought in numbers for a run of gates or doors.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/3-way-adjustable-weld-on-gate-hinge-m20-130mm-eyebolt-drawing.jpg?width=1200\" alt=\"Drawing of the 3 way adjustable weld-on gate hinge with M20 eyebolt, 60mm U bracket and 130 x 60mm slotted plate\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this hinge works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eYou can adjust it after it is installed.\u003c\/strong\u003e Welded hinges normally lock in any error. Here, the gap between gate and post and the gate's depth can both still be adjusted once the steel parts are welded in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeld the steelwork, keep the eyebolt clean.\u003c\/strong\u003e The eyebolt, cross pin and fixings are galvanised, while the U bracket and slotted plate are plain steel for welding. Paint or galvanise the plain parts with the frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e180 degree swing.\u003c\/strong\u003e The hinge sits outside the post face, which lets the leaf fold right back against a run of fencing.\u003c\/p\u003e\n\u003cp\u003eA matching hydraulic closer can be used with this hinge. See the table below.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSteel box-section gates, commercial and school perimeter gates, pedestrian gates and gates that need a hydraulic closer. This is a weld-on hinge, so it is for new fabrication or for gates and posts being altered in the workshop. It is not a bolt-on repair part.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne hinge, minimum order 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIn the pack\u003c\/th\u003e\n\u003ctd\u003eU bracket, cross pin, M20 eyebolt, slotted plate, washers and nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEyebolt\u003c\/th\u003e\n\u003ctd\u003eM20, 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread reach\u003c\/th\u003e\n\u003ctd\u003e105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eU bracket\u003c\/th\u003e\n\u003ctd\u003e60mm wide, 51mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlotted plate\u003c\/th\u003e\n\u003ctd\u003e130 x 60 x 12mm, 21mm wide slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket to pin centre\u003c\/th\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpening angle\u003c\/th\u003e\n\u003ctd\u003e180 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdjustment\u003c\/th\u003e\n\u003ctd\u003eGap and depth, after installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised eyebolt and pin, plain weld-on bracket and plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGate weight limit\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.73 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right size\u003c\/h2\u003e\n\u003cp\u003eThis M20 hinge is the larger size in the 3 way adjustment group, and its 130mm eyebolt reaches further than the 110mm M16 version. If you also need height adjustment, or a smaller section, look at the four-way versions below. If your gate cannot be welded, look at the bolt-on hinges instead. If your gate needs to close by itself, check our hydraulic closer for 180 degree hinges, and call us to confirm it will suit your gate.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eM20 eyebolt, 3 way, weld-on\u003c\/td\u003e\n\u003ctd\u003eThis hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA smaller M16 eyebolt\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-3-way-adjustment-hinge-eyebolt-m16\"\u003eM16, 110mm, 3 way\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAn M20 hinge with height adjustment\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-adjustable-hinge-with-m20-eyebolt\"\u003eM20, 4-way weld-on\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo welding\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/bolt-on-180-degree-adjustable-gate-hinges-m16-galvanised-pair\"\u003eM16, bolt-on pair\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA matching hydraulic gate closer\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/hydraulic-gate-closer-for-180-hinges-150kg-silver\"\u003eHydraulic closer for 180 degree hinges\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-adjustable-hinges\"\u003eadjustable gate hinges\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eWeld the U bracket to the post at each hinge height, keeping the two pin centres in a true vertical line. Weld the slotted plate to the gate frame, then bring the parts together: fit the eyebolt in the bracket with its cross pin, pass the thread through the slot, and fit a washer and nut on each side. Hang the gate on packers, set the gap and the depth with the nuts and slot, and tighten up.\u003c\/p\u003e\n\u003cp\u003ePaint the welds and the plain steel after fitting. Keep the nuts tight, grease the pin, and re-check the setting after the first few weeks of use.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one hinge?\u003c\/summary\u003e\u003cp\u003eYes, one complete hinge, and the minimum order is 4. Most gate leaves need two.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat can I adjust?\u003c\/summary\u003e\u003cp\u003eThe gap between gate and post, and the depth of the gate, both after the hinge has been installed.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much will it carry?\u003c\/summary\u003e\u003cp\u003eA gate weight limit is not published for this line. Call us with the gate size and weight, and we will help you decide whether it suits the job.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo the plain steel parts come galvanised?\u003c\/summary\u003e\u003cp\u003eThe eyebolt, cross pin and fixings are galvanised. The weld-on U bracket and slotted plate are plain steel, so finish them with the gate after welding.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 4 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254320972163,"sku":"SSHF-593155-01","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/3-way-adjustable-weld-on-gate-hinge-m20-130mm-eyebolt-in-use.jpg?v=1794141050","url":"https:\/\/industrialsuppliesco.co.uk\/products\/3-way-adjustable-weld-on-gate-hinge-m20-130mm-eyebolt","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}