{"product_id":"230v-digital-gate-control-box-swing-or-sliding-ip55","title":"230V Digital Gate Control Box for 1 or 2 Motors, Swing or Sliding, IP55","description":"\u003cp\u003e\u003cstrong\u003eA digital control box for one or two 230V gate motors, swing or sliding.\u003c\/strong\u003e If a board has failed on an existing gate, or you are wiring a 230V installation from parts, this unit supplies both motors, handles the safety inputs and is set up from its onboard display and menu. It learns the operating time for itself, gives you a pedestrian opening from a transmitter button and stops or starts on command. The board controls encoder-equipped 230V motors and senses obstacles by monitoring motor condition. It is housed in a 312 x 210 x 100mm IP55 enclosure for outdoor mounting. Radio receiver modules are plug-in and not listed in the published contents, so tell us if you need one. The price shown is for one control box.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/230v-digital-gate-control-box-swing-or-sliding-ip55-drawing.jpg?width=1200\" alt=\"Drawing of the 230V digital gate control box for one or two 230V motors, showing its published dimensions\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this control box works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOne board for most 230V gates.\u003c\/strong\u003e It drives one or two motors, swing or sliding, so you can keep a single control box on the shelf for service work. Opening and closing delays stop the leaves of a double gate colliding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick to set up.\u003c\/strong\u003e Self learning of operating time and a display with a menu of settings mean you are programming from the unit rather than working through jumpers and DIP switches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety inputs you can test.\u003c\/strong\u003e It has inputs for two sets of photocells and two sets of safety edges, a stop input, and the board runs a test of safety devices before each opening. Inputs that are not used can be disabled from the menu without a wire link.\u003c\/p\u003e\n\u003cp\u003eA low energy module can be added to reduce standby power by shutting down the display and connected devices while the gate is standing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eReplacing a failed control unit on a 230V swing or sliding gate, new 230V installations built from separate motors, and industrial and commercial sites where you want a common control box across several gates. It is mounted on a wall or post near the gate, within the IP55 rating. It is not for 24V motors, which need a 24V control unit.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne control box with digital control board and fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput supply\u003c\/th\u003e\n\u003ctd\u003e230V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotors\u003c\/th\u003e\n\u003ctd\u003e1 or 2 motors at 230V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum motor load\u003c\/th\u003e\n\u003ctd\u003e2 x 700W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e40%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccessory output\u003c\/th\u003e\n\u003ctd\u003e24V, 10W maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLock output\u003c\/th\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlashing light output\u003c\/th\u003e\n\u003ctd\u003e230V, 40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eIP55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking temperature\u003c\/th\u003e\n\u003ctd\u003e-20 to +60 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure dimensions\u003c\/th\u003e\n\u003ctd\u003e312 x 210 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl unit weight\u003c\/th\u003e\n\u003ctd\u003e1.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRadio receiver\u003c\/th\u003e\n\u003ctd\u003ePlug-in module, not listed in the published contents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right control box\u003c\/h2\u003e\n\u003cp\u003eCheck the voltage of your motors first: this unit drives 230V motors only. Add up the motor wattage and stay within the 2 x 700W limit. If your existing board has a radio module and accessories already, confirm the wiring before you order, and call us with a photo of the old board if you are unsure. Our other control box is a simpler choice where you want a built-in 433MHz receiver.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital control for 1 or 2 230V motors, display and menu\u003c\/td\u003e\n\u003ctd\u003eThis control box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e230V control unit with built-in 433MHz receiver\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-universal-control-panel\"\u003e230V gate control unit with 433MHz receiver\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSliding gate kit with a built-in control unit\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/24v-sliding-gate-automation-kit-400kg\"\u003e24V sliding gate kit, 400kg\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhotocells for the safety inputs\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-wall-mounted-photocells\"\u003eWall mounted photocells, pair\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eIsolate the supply before you open the box. Fix the enclosure to a flat, sheltered surface using the fixings supplied, with cable entries facing down, and seal any unused knock-outs. Wire the motors to the motor terminals, then wire the stop button, photocells and safety edges to their inputs and leave no safety input bridged. Run the learning cycle and test the safety devices. Mains wiring should be done by a qualified electrician, and the finished gate must be tested by a competent person.\u003c\/p\u003e\n\u003cp\u003eKeep the lid gasket clean and the enclosure closed. Check the fuse and cable entries during a routine service.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it run my motors?\u003c\/summary\u003e\u003cp\u003eIt will run one or two 230V motors up to 700W each. If your motors are 24V, or you have encoders that are not compatible, it is not the right unit. Call us with the motor details if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs a radio receiver included?\u003c\/summary\u003e\u003cp\u003eA plug-in receiver module is not listed in the published contents for this line. Tell us if you need one and we will confirm before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it suitable for hydraulic motors?\u003c\/summary\u003e\u003cp\u003eHydraulic rams need particular settings on this board, with force at 100%, slowdowns off and the obstacle sensor disabled. Check your motor manual, and call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go outdoors?\u003c\/summary\u003e\u003cp\u003eThe enclosure is IP55 and rated for outdoor use. Mount it on a post or wall, out of standing water, and keep the lid closed.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254341124483,"sku":"SSHF-312899-01","price":525.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/230v-digital-gate-control-box-swing-or-sliding-ip55-in-use.jpg?v=1794141374","url":"https:\/\/industrialsuppliesco.co.uk\/products\/230v-digital-gate-control-box-swing-or-sliding-ip55","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}