{"title":"Speed Bumps","description":"\u003cp\u003eRubber speed bumps for car parks, service roads and site entrances. Choose a one piece 1830mm bump with end caps, or build a bump to your lane width from 500mm middle sections in black or yellow, with an end section at each end. Fixings are sold separately, and every bump should be used with warning signs.\u003c\/p\u003e","products":[{"product_id":"premium-rubber-speed-bump-end-cap","title":"Rubber Speed Bump End Cap, Black - 300 x 150 x 50 mm","description":"\u003cp\u003e\u003cstrong\u003eThe neat finish for each end of your speed bump.\u003c\/strong\u003e This half round rubber cap fits the end of our 1830mm speed bump. It slopes the end of the bump down to the road and gives the run a finished look. Two pegs push into the end of the bump, and one bolt holds the cap down. It measures about 300 x 150 x 50mm and weighs about 1.7kg. The price is for one cap, and a run takes two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-speed-bump-end-cap-300x150x50mm-dimensions.jpg?width=1200\" alt=\"Dimension and fitting drawing of the rubber speed bump end cap: approximately 300mm across, 150mm deep, 50mm high, with 1 fixing hole and 2 pegs\" width=\"1200\" height=\"984\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this cap works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTwo locating pegs.\u003c\/strong\u003e The pegs on the flat side line the cap up with the end of the bump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA rounded end.\u003c\/strong\u003e The half round shape slopes down to the road on all sides, in place of the square end of the bump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne recessed fixing.\u003c\/strong\u003e The hole has a 37mm recess, 25mm deep, so the bolt head sits down inside the rubber.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eFit one at each end of a run of our 1830mm rubber speed bump, in office and hotel car parks and on other light traffic routes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne end cap, priced each. Fixing not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox 300 x 150 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.7kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCommercial grade rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing hole\u003c\/th\u003e\n\u003ctd\u003e1, 16mm through with a 37mm recess, 25mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing needed\u003c\/th\u003e\n\u003ctd\u003e1 x \u003ca href=\"\/products\/m16-x-125mm-heavy-duty-fixings\"\u003eM16 x 125mm through stud\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOur \u003ca href=\"\/products\/premium-durable-speed-bump-300-x-50-x-1830-mm\"\u003e1830mm rubber speed bump\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, as moulded rubber varies slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to fit it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePush the 2 pegs into the end of the bump.\u003c\/li\u003e\n\u003cli\u003eMark the fixing hole.\u003c\/li\u003e\n\u003cli\u003eDrill for an M16 x 125mm through stud.\u003c\/li\u003e\n\u003cli\u003eFix through the hole, with the bolt head down in the recess.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe ends of an 1830mm bump\u003c\/td\u003e\n\u003ctd\u003eThis cap, 2 per run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe 1830mm bump itself\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-durable-speed-bump-300-x-50-x-1830-mm\"\u003eRubber speed bump, 1830mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe ends of a black sectional bump\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/black-rubber-speed-bump-end-section-250x400x50mm\"\u003eBlack end section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe ends of a yellow sectional bump\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/yellow-rubber-speed-bump-end-section-250x400x50mm\"\u003eYellow end section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the fixing when you check the bump, and replace the cap if the rubber splits or the pegs fail.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need?\u003c\/summary\u003e\u003cp\u003eTwo per run, one at each end. Two bumps fitted in a line still need only two caps.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the fixing included?\u003c\/summary\u003e\u003cp\u003eNo. Each cap needs 1 M16 x 125mm through stud, and we sell a \u003ca href=\"\/products\/m16-x-125mm-heavy-duty-fixings\"\u003esuitable stud\u003c\/a\u003e separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit other speed bumps?\u003c\/summary\u003e\u003cp\u003eIt is made for our \u003ca href=\"\/products\/premium-durable-speed-bump-300-x-50-x-1830-mm\"\u003e1830mm bump\u003c\/a\u003e. The pegs need matching holes, so it will not suit the sectional bumps, which have their own end sections.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226164208003,"sku":"R_ISP107","price":18.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-speed-bump-end-cap-300x150x50mm-lead-f7b6ccdc-12c7-4b3d-a43c-78e2c0c3b1c7.jpg?v=1793887795"},{"product_id":"premium-durable-speed-bump-300-x-50-x-1830-mm","title":"Rubber Speed Bump with Cat's Eyes, Black and Yellow - 1830 x 300 x 50 mm","description":"\u003cp\u003e\u003cstrong\u003eOne moulding, 1.83m long, to slow light traffic.\u003c\/strong\u003e This rubber speed bump comes as a single piece, so there is one heavy length to bolt down and no joints inside it. Bold yellow bands and 8 white cat's eyes make it easy to see, and it suits light traffic in office and hotel car parks. Add a second bump for a wider lane, and finish the ends with end caps. It measures about 1830 x 300 x 50mm and weighs about 22kg. The price is for one bump.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-speed-bump-cats-eyes-1830x300x50mm-dimensions.jpg?width=1200\" alt=\"Dimension and fitting drawing of the rubber speed bump: approximately 1830mm long, 300mm wide, 50mm high, with 4 fixing holes and 8 cat's eyes\" width=\"1200\" height=\"984\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this bump works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOne long piece.\u003c\/strong\u003e At 1.83m in one moulding, a single bump covers a good part of a car park lane with only 4 bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYellow bands and cat's eyes.\u003c\/strong\u003e Five diagonal yellow bands stand out on tarmac, and the 8 white cat's eyes are set along the two long sides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecessed fixings.\u003c\/strong\u003e Each hole has a 37mm recess, 25mm deep, so the bolt head sits down inside the rubber.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it in office and hotel car parks, on private service roads and on other light traffic routes where you want drivers to slow down. Add warning signs so drivers know it is there.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne bump, priced each. Fixings and end caps not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox 1830 x 300 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 22kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCommercial grade rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack with yellow bands, 8 white cat's eyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e4, each 16mm through with a 37mm recess, 25mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings needed\u003c\/th\u003e\n\u003ctd\u003e4 x \u003ca href=\"\/products\/m16-x-125mm-heavy-duty-fixings\"\u003eM16 x 125mm through stud\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eLight traffic. Load rating not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, as moulded rubber varies slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to fit it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the road and set the bump in place, square across the lane.\u003c\/li\u003e\n\u003cli\u003eMark all 4 holes.\u003c\/li\u003e\n\u003cli\u003eDrill for M16 x 125mm through studs.\u003c\/li\u003e\n\u003cli\u003eFix through all 4 holes, with the bolt heads down in the recesses.\u003c\/li\u003e\n\u003cli\u003eFit the end caps and your warning signs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA one piece bump for light traffic\u003c\/td\u003e\n\u003ctd\u003eThis bump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA neat finish at each end\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/premium-rubber-speed-bump-end-cap\"\u003eRubber end cap\u003c\/a\u003e, 2 per run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA sectional bump built to your lane width\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/black-rubber-speed-bump-middle-section-500x400x50mm\"\u003eBlack 500mm middle section\u003c\/a\u003e or \u003ca href=\"\/products\/yellow-rubber-speed-bump-middle-section-500x400x50mm\"\u003eyellow 500mm middle section\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA low strip rather than a bump\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-rumble-strip-wall-guard-1500x120x20mm\"\u003e1500 x 120 x 20mm rumble strip\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the fixings regularly and tighten any that work loose, keep the bump clean so it stays easy to see, and replace any part that splits or lifts.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow long is it with end caps?\u003c\/summary\u003e\u003cp\u003eOne bump with an end cap at each end is about 2.13m long. Each extra bump adds about 1.83m.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Each bump needs 4 M16 x 125mm through studs, and we sell a \u003ca href=\"\/products\/m16-x-125mm-heavy-duty-fixings\"\u003esuitable stud\u003c\/a\u003e separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it take lorries?\u003c\/summary\u003e\u003cp\u003eIt is suited to light traffic, and no load rating is published for this line. Call us before using it on a route with heavy vehicles.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it on a public road?\u003c\/summary\u003e\u003cp\u003eSpeed bumps on public roads are controlled by the highway authority. This one is for private sites such as car parks, so check with the authority if the road is not yours.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226164306307,"sku":"R_ISP109","price":137.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-speed-bump-cats-eyes-1830x300x50mm-lead.jpg?v=1793887794"},{"product_id":"black-rubber-speed-bump-middle-section-500x400x50mm","title":"Black Rubber Speed Bump Middle Section - 500 x 400 x 50 mm","description":"\u003cp\u003e\u003cstrong\u003eA black section, so you can build a bump to your lane width.\u003c\/strong\u003e Each of these rubber sections is 500mm wide. Bolt as many as you need side by side, then finish the run with an end section at each end. The black cap and white chevrons make it easy to see in a car park or at a supermarket. It measures about 500 x 400 x 50mm and weighs about 8.5kg. The price is for one section.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-rubber-speed-bump-middle-section-500x400x50mm-dimensions.jpg?width=1200\" alt=\"Dimension and fitting drawing of the black rubber speed bump middle section: approximately 500mm wide, 400mm front to back, 50mm high, with 4 fixing holes\" width=\"1200\" height=\"984\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this section works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to your width.\u003c\/strong\u003e Add or take away 500mm sections to fit the lane. A 3m run takes 5 middle sections and 2 end sections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA solid colour cap.\u003c\/strong\u003e Commercial grade rubber is capped with solid black rubber, with white chevrons on top. The underside has moulded pockets, as the photo shows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour recessed fixings.\u003c\/strong\u003e One hole sits near each corner, for an M12 fixing with a 35mm recess, so the bolt head sits down in the rubber.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it in car parks and at supermarkets, on private service roads and at site entrances where you want drivers to slow down. It should be used with signs that warn drivers and tell them to reduce their speed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle section, priced each. Fixings and end sections not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox 500 x 400 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 8.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCommercial grade rubber capped with solid black rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e4, for M12 with a 35mm recess\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for concrete\u003c\/th\u003e\n\u003ctd\u003e4 x \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for tarmac\u003c\/th\u003e\n\u003ctd\u003e4 x \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, as moulded rubber varies slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to fit it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the road and set out the whole run, square across the lane.\u003c\/li\u003e\n\u003cli\u003eMark all 4 holes on each section.\u003c\/li\u003e\n\u003cli\u003eDrill for your M12 x 100mm fixings.\u003c\/li\u003e\n\u003cli\u003eFix through all 4 holes, with the bolt heads down in the recesses.\u003c\/li\u003e\n\u003cli\u003ePut up warning signs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA black middle section\u003c\/td\u003e\n\u003ctd\u003eThis section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe rounded end of a black run\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/black-rubber-speed-bump-end-section-250x400x50mm\"\u003eBlack end section\u003c\/a\u003e, 2 per run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA yellow section, on its own or to alternate\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/yellow-rubber-speed-bump-middle-section-500x400x50mm\"\u003eYellow middle section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA one piece bump for light traffic\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-durable-speed-bump-300-x-50-x-1830-mm\"\u003e1830mm rubber speed bump\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the fixings regularly and tighten any that work loose, keep the bump clean so it stays easy to see, and replace any part that splits or lifts.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many sections do I need?\u003c\/summary\u003e\u003cp\u003eMeasure the width to cover and take off 500mm for the two end sections, then divide the rest by 500mm. A 3m run takes 5 middle sections and 2 end sections.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Each section needs 4 M12 x 100mm fixings. For concrete, use an \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e. For tarmac, use an \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I mix black and yellow?\u003c\/summary\u003e\u003cp\u003eYes, the two colours are the same size, so you can alternate them for a striped run using this and the \u003ca href=\"\/products\/yellow-rubber-speed-bump-middle-section-500x400x50mm\"\u003eyellow section\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it on a public road?\u003c\/summary\u003e\u003cp\u003eSpeed bumps on public roads are controlled by the highway authority. This one is for private sites such as car parks, so check with the authority if the road is not yours.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63237177213315,"sku":"SBP-610688-01","price":48.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-rubber-speed-bump-middle-section-500x400x50mm-lead.jpg?v=1793887852"},{"product_id":"black-rubber-speed-bump-end-section-250x400x50mm","title":"Black Rubber Speed Bump End Section - 250 x 400 x 50 mm","description":"\u003cp\u003e\u003cstrong\u003eThe rounded black end that finishes a sectional speed bump.\u003c\/strong\u003e Fit one of these at each end of a run of our 500mm speed bump sections. It slopes down to the road at its rounded end, so the bump finishes neatly at the edge of the lane. It has solid black rubber over commercial grade rubber, and it fixes down at 3 points. It measures about 250 x 400 x 50mm and weighs about 3kg. The price is for one end section, and a run takes two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-rubber-speed-bump-end-section-250x400x50mm-dimensions.jpg?width=1200\" alt=\"Dimension and fitting drawing of the black rubber speed bump end section: approximately 250mm long, 400mm front to back, 50mm high, with 3 fixing holes\" width=\"1200\" height=\"984\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this end section works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA sloping end.\u003c\/strong\u003e The section starts at the full 50mm height at its straight side and slopes down to the road at its rounded end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRounded corners.\u003c\/strong\u003e The outer corners are rounded, in solid black rubber, with no square end to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree recessed fixings.\u003c\/strong\u003e Two holes sit near the straight side and one near the rounded end, each for an M12 fixing with a 35mm recess.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it at both ends of a sectional speed bump in car parks and at supermarkets, on private service roads and at site entrances. The bump should be used with signs that warn drivers and tell them to reduce their speed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne end section, priced each. Fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox 250 x 400 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 3kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCommercial grade rubber capped with solid black rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e3, for M12 with a 35mm recess\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for concrete\u003c\/th\u003e\n\u003ctd\u003e3 x \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for tarmac\u003c\/th\u003e\n\u003ctd\u003e3 x \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, as moulded rubber varies slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to fit it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eButt the straight side up to the last middle section.\u003c\/li\u003e\n\u003cli\u003eMark all 3 holes.\u003c\/li\u003e\n\u003cli\u003eDrill for your M12 x 100mm fixings.\u003c\/li\u003e\n\u003cli\u003eFix through all 3 holes, with the bolt heads down in the recesses.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe end of a run, in black\u003c\/td\u003e\n\u003ctd\u003eThis end section, 2 per run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe black sections for the middle of the run\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/black-rubber-speed-bump-middle-section-500x400x50mm\"\u003eBlack middle section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same end in yellow\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/yellow-rubber-speed-bump-end-section-250x400x50mm\"\u003eYellow end section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe end of an 1830mm one piece bump\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-rubber-speed-bump-end-cap\"\u003eRubber end cap\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the fixings regularly and tighten any that work loose, and replace the end section if the rubber splits or lifts.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need?\u003c\/summary\u003e\u003cp\u003eTwo per run, one at each end, however many middle sections you use.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Each end section needs 3 M12 x 100mm fixings. For concrete, use an \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e. For tarmac, use an \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it lock to the middle section?\u003c\/summary\u003e\u003cp\u003eNo pegs or joints are shown on these sections. Each one bolts down on its own, butted up to the next.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63237177442691,"sku":"SBP-610753-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-rubber-speed-bump-end-section-250x400x50mm-lead.jpg?v=1793887853"},{"product_id":"yellow-rubber-speed-bump-middle-section-500x400x50mm","title":"Yellow Rubber Speed Bump Middle Section - 500 x 400 x 50 mm","description":"\u003cp\u003e\u003cstrong\u003eA yellow section, so you can build a bump to your lane width.\u003c\/strong\u003e Each of these rubber sections is 500mm wide. Bolt as many as you need side by side, then finish the run with an end section at each end. The yellow cap and white chevrons make it easy to see in a car park or at a supermarket. It measures about 500 x 400 x 50mm and weighs about 8.5kg. The price is for one section.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-rubber-speed-bump-middle-section-500x400x50mm-dimensions.jpg?width=1200\" alt=\"Dimension and fitting drawing of the yellow rubber speed bump middle section: approximately 500mm wide, 400mm front to back, 50mm high, with 4 fixing holes\" width=\"1200\" height=\"984\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this section works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to your width.\u003c\/strong\u003e Add or take away 500mm sections to fit the lane. A 3m run takes 5 middle sections and 2 end sections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA solid colour cap.\u003c\/strong\u003e Commercial grade rubber is capped with solid yellow rubber, with white chevrons on top. The underside has moulded pockets, as the photo shows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour recessed fixings.\u003c\/strong\u003e One hole sits near each corner, for an M12 fixing with a 35mm recess, so the bolt head sits down in the rubber.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it in car parks and at supermarkets, on private service roads and at site entrances where you want drivers to slow down. It should be used with signs that warn drivers and tell them to reduce their speed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle section, priced each. Fixings and end sections not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox 500 x 400 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 8.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCommercial grade rubber capped with solid yellow rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e4, for M12 with a 35mm recess\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for concrete\u003c\/th\u003e\n\u003ctd\u003e4 x \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for tarmac\u003c\/th\u003e\n\u003ctd\u003e4 x \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, as moulded rubber varies slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to fit it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the road and set out the whole run, square across the lane.\u003c\/li\u003e\n\u003cli\u003eMark all 4 holes on each section.\u003c\/li\u003e\n\u003cli\u003eDrill for your M12 x 100mm fixings.\u003c\/li\u003e\n\u003cli\u003eFix through all 4 holes, with the bolt heads down in the recesses.\u003c\/li\u003e\n\u003cli\u003ePut up warning signs.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA yellow middle section\u003c\/td\u003e\n\u003ctd\u003eThis section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe rounded end of a yellow run\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/yellow-rubber-speed-bump-end-section-250x400x50mm\"\u003eYellow end section\u003c\/a\u003e, 2 per run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA black section, on its own or to alternate\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/black-rubber-speed-bump-middle-section-500x400x50mm\"\u003eBlack middle section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA one piece bump for light traffic\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-durable-speed-bump-300-x-50-x-1830-mm\"\u003e1830mm rubber speed bump\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the fixings regularly and tighten any that work loose, keep the bump clean so it stays easy to see, and replace any part that splits or lifts.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many sections do I need?\u003c\/summary\u003e\u003cp\u003eMeasure the width to cover and take off 500mm for the two end sections, then divide the rest by 500mm. A 3m run takes 5 middle sections and 2 end sections.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Each section needs 4 M12 x 100mm fixings. For concrete, use an \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e. For tarmac, use an \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I mix black and yellow?\u003c\/summary\u003e\u003cp\u003eYes, the two colours are the same size, so you can alternate them for a striped run using this and the \u003ca href=\"\/products\/black-rubber-speed-bump-middle-section-500x400x50mm\"\u003eblack section\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it on a public road?\u003c\/summary\u003e\u003cp\u003eSpeed bumps on public roads are controlled by the highway authority. This one is for private sites such as car parks, so check with the authority if the road is not yours.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63237204640131,"sku":"SBP-613244-01","price":48.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-rubber-speed-bump-middle-section-500x400x50mm-lead.jpg?v=1793887908"},{"product_id":"yellow-rubber-speed-bump-end-section-250x400x50mm","title":"Yellow Rubber Speed Bump End Section - 250 x 400 x 50 mm","description":"\u003cp\u003e\u003cstrong\u003eThe rounded yellow end that finishes a sectional speed bump.\u003c\/strong\u003e Fit one of these at each end of a run of our 500mm speed bump sections. It slopes down to the road at its rounded end, so the bump finishes neatly at the edge of the lane. It has solid yellow rubber over commercial grade rubber, and it fixes down at 3 points. It measures about 250 x 400 x 50mm and weighs about 3kg. The price is for one end section, and a run takes two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-rubber-speed-bump-end-section-250x400x50mm-dimensions.jpg?width=1200\" alt=\"Dimension and fitting drawing of the yellow rubber speed bump end section: approximately 250mm long, 400mm front to back, 50mm high, with 3 fixing holes\" width=\"1200\" height=\"984\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this end section works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA sloping end.\u003c\/strong\u003e The section starts at the full 50mm height at its straight side and slopes down to the road at its rounded end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRounded corners.\u003c\/strong\u003e The outer corners are rounded, in solid yellow rubber, with no square end to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree recessed fixings.\u003c\/strong\u003e Two holes sit near the straight side and one near the rounded end, each for an M12 fixing with a 35mm recess.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it at both ends of a sectional speed bump in car parks and at supermarkets, on private service roads and at site entrances. The bump should be used with signs that warn drivers and tell them to reduce their speed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne end section, priced each. Fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox 250 x 400 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 3kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCommercial grade rubber capped with solid yellow rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e3, for M12 with a 35mm recess\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for concrete\u003c\/th\u003e\n\u003ctd\u003e3 x \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for tarmac\u003c\/th\u003e\n\u003ctd\u003e3 x \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, as moulded rubber varies slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to fit it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eButt the straight side up to the last middle section.\u003c\/li\u003e\n\u003cli\u003eMark all 3 holes.\u003c\/li\u003e\n\u003cli\u003eDrill for your M12 x 100mm fixings.\u003c\/li\u003e\n\u003cli\u003eFix through all 3 holes, with the bolt heads down in the recesses.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe end of a run, in yellow\u003c\/td\u003e\n\u003ctd\u003eThis end section, 2 per run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe yellow sections for the middle of the run\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/yellow-rubber-speed-bump-middle-section-500x400x50mm\"\u003eYellow middle section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same end in black\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/black-rubber-speed-bump-end-section-250x400x50mm\"\u003eBlack end section\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe end of an 1830mm one piece bump\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-rubber-speed-bump-end-cap\"\u003eRubber end cap\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the fixings regularly and tighten any that work loose, and replace the end section if the rubber splits or lifts.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need?\u003c\/summary\u003e\u003cp\u003eTwo per run, one at each end, however many middle sections you use.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Each end section needs 3 M12 x 100mm fixings. For concrete, use an \u003ca href=\"\/products\/premium-through-stud-fixing-m12-x-100mm\"\u003eM12 x 100mm through stud\u003c\/a\u003e. For tarmac, use an \u003ca href=\"\/products\/premium-moulded-rubber-fixing-m12-x-100-mm\"\u003eM12 x 100mm rubber sleeve fixing\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it lock to the middle section?\u003c\/summary\u003e\u003cp\u003eNo pegs or joints are shown on these sections. Each one bolts down on its own, butted up to the next.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63237205950851,"sku":"SBP-613342-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-rubber-speed-bump-end-section-250x400x50mm-lead-727fc535-8cf9-486c-9830-34c5d26e5653.jpg?v=1793887908"}],"url":"https:\/\/industrialsuppliesco.co.uk\/collections\/speed-bumps.oembed","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}