{"title":"Loading Bay Protection","description":"\u003cp\u003eEquipment that protects loading bays, docks and the vehicles using them: HGV wheel guides, dock bumpers and truck wheel stops.\u003c\/p\u003e","products":[{"product_id":"rubber-steel-dock-bumper-760-x-275-x-165mm","title":"Deep Rubber \u0026 Steel Dock Bumper 760 x 275 x 165mm with Free Fixings | Sliding No-Hole Yellow UHMWPE Face, Galvanised Steel Cradle | HGV Loading Bay","description":"\u003cp\u003e\u003cstrong\u003eWhen a standard bumper leaves too little gap between the trailer and your dock, this one holds it 165mm off the wall.\u003c\/strong\u003e It is the deep version of our tall sliding dock bumper, for loading bays that need more stand-off and more give behind the face. It suits warehouse managers, site maintenance teams and loading bay installers fitting out or repairing bays that take articulated trailers all day.\u003c\/p\u003e\n\u003cp\u003eThis dock bumper has a large impact area with no holes in the UHMWPE face plate for the back of the truck to snag on. The 50mm thick face can slide freely up and down in its steel cradle back plate. This bumper compresses 20mm under a 20 tonne load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e760mm by 275mm by 165mm\u003c\/li\u003e\n\u003cli\u003eWeight 63kg\u003c\/li\u003e\n\u003cli\u003eFree fixings included: six M16 anchor studs and two washers\u003c\/li\u003e\n\u003cli\u003eCost-effective solution to protect your building from damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/deep-sliding-dock-bumper-760-x-275-x-165mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the deep sliding dock bumper 760 x 275 x 165mm with six hole positions, end view with two rubber layers and the yellow face lifted out of its galvanised steel cradle\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003ch3\u003eTwo rubber layers behind the face\u003c\/h3\u003e\n\u003cp\u003eOpen the top of this bumper and you see two thick layers of rubber stacked inside a deep galvanised cradle. That extra rubber is what the depth buys you: this assembly compresses 20mm under a 20 tonne load, where our \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e110mm deep version\u003c\/a\u003e compresses 11mm under 15 tonnes. Those figures let you check the stand-off against your own dock and leveller instead of guessing.\u003c\/p\u003e\n\u003ch3\u003eThe face moves with the trailer\u003c\/h3\u003e\n\u003cp\u003eA trailer sinks as a forklift drives on and rises as it comes off. On a fixed buffer, that movement drags across the rubber and tears it. Here the 50mm face can slide up and down inside its cradle, so the movement is taken by a low friction surface instead.\u003c\/p\u003e\n\u003ch3\u003eNothing on the face to catch\u003c\/h3\u003e\n\u003cp\u003eThe UHMWPE (ultra high molecular weight polyethylene) face has no holes along its 750mm length, so there are no bolt heads or recesses for the back of a truck to snag on. All six fixing holes sit in the back plate, behind the face. The yellow also gives a driver a clear reference point when reversing.\u003c\/p\u003e\n\u003ch3\u003eRepair the part that is damaged\u003c\/h3\u003e\n\u003cp\u003eThe galvanised back plate is sold separately on this page, so a bent cradle does not mean ordering a complete assembly.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eThis bumper goes on the dock face either side of a dock leveller or door opening, at distribution centres, manufacturing plants and goods-in bays. Choose it over a shallower bumper when your trailers need to stop further from the wall. Because the stand-off sets the gap between trailer and leveller, measure your existing setup and check that your leveller lip still reaches the trailer bed before you change depth.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDock Bumper\u003c\/th\u003e\n\u003cth\u003eBack Plate\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhat you get\u003c\/td\u003e\n\u003ctd\u003eComplete unit: back plate, two rubber layers and yellow face\u003c\/td\u003e\n\u003ctd\u003eGalvanised cradle only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e760 x 275 x 165mm\u003c\/td\u003e\n\u003ctd\u003eApprox 760 x 270 x 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e63kg\u003c\/td\u003e\n\u003ctd\u003e32kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eUHMWPE, rubber and galvanised steel\u003c\/td\u003e\n\u003ctd\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace\u003c\/td\u003e\n\u003ctd\u003e50mm thick, 750mm long, yellow, no holes, slides in cradle\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression\u003c\/td\u003e\n\u003ctd\u003e20mm under 20 tonne load\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003ctd\u003eSBR and natural rubber blend, 70-75 Shore A, +\/- 5, -15°C to 70°C\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing holes\u003c\/td\u003e\n\u003ctd\u003e6, through the back plate\u003c\/td\u003e\n\u003ctd\u003e6: 2 x 26mm at the top for M24 bolts, 2 x 20mm halfway down, 2 x 20mm at the bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHole centres\u003c\/td\u003e\n\u003ctd\u003eAbout 145mm across\u003c\/td\u003e\n\u003ctd\u003eAbout 145mm across, about 325mm apart, top pair 55mm from the top, 60mm from the side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand-off from wall\u003c\/td\u003e\n\u003ctd\u003e165mm\u003c\/td\u003e\n\u003ctd\u003e130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixings\u003c\/td\u003e\n\u003ctd\u003eFree fixings included: 6 M16 through-anchor studs, 125 to 140mm long, and 2 washers (50mm OD, 16mm ID, 3mm thick)\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the Right Option\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Dock Bumper\u003c\/strong\u003e for a new bay or to replace a complete unit. It is the full assembly of sliding face, two rubber layers and steel cradle, and most doors need two.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Back Plate\u003c\/strong\u003e only if your cradle has been damaged and the rest is still serviceable, or if you want to fix the steel ahead of the rest of the job. It is the backing plate used in this bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed 50mm more stand-off?\u003c\/strong\u003e The \u003ca href=\"\/products\/deep-sliding-dock-bumper-face-750-x-250-x-100mm\"\u003edeep 750 x 250 x 100mm replacement face\u003c\/a\u003e swaps in for the standard 50mm face in this cradle and takes the bumper to about 215mm deep. Check that your leveller lip still reaches the trailer bed before you fit it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTrailers riding over the leveller?\u003c\/strong\u003e The two 26mm holes at the top of the back plate take M24 bolts for fixing to an above dock angle bracket, if required. The bracket is sold as an option on the \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm bumper page\u003c\/a\u003e. Call us if you want to check the fit for your dock first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a different size?\u003c\/strong\u003e The \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm bumper\u003c\/a\u003e has the same height with less stand-off. The \u003ca href=\"\/products\/heavy-duty-dock-bumper-465-x-280-x-160-mm\"\u003e465 x 280 x 160mm bumper\u003c\/a\u003e has similar depth in a shorter length. You can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eAt 63kg this is a job for two people with a lifting aid. Fit it to sound concrete using six M16 through-anchor studs and two washers, and have a competent installer confirm that the wall and anchors suit the loads at your dock. Mark out from the drawing above, then offer the back plate up and check the holes against it before you drill. The two washers suit the larger 26mm holes at the top, where a 16mm stud would otherwise sit loose.\u003c\/p\u003e\n\u003cp\u003eCheck the face, rubber and fixings during routine bay inspections, and replace damaged parts before the steel starts taking hits. This bumper protects against routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or safe docking procedures.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per door?\u003c\/summary\u003e\u003cp\u003eMost bays use two, one either side of the leveller or door opening. The price shown is for one bumper, so add two to your basket for a standard door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with the Dock Bumper option: six M16 through-anchor studs, 125 to 140mm long, and two washers (50mm OD, 16mm ID, 3mm thick), for fitting to sound concrete. The M24 bolts for an above dock bracket are not part of this set.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much does it compress?\u003c\/summary\u003e\u003cp\u003eThe assembly compresses 20mm under a 20 tonne load. That is a compression figure, not a rating for what your wall or fixings can take, so have the dock structure checked as well.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy choose this over the 110mm deep version?\u003c\/summary\u003e\u003cp\u003eThis one stands 55mm further off the wall and has two rubber layers behind the face. Choose it when your bay needs the extra stand-off. If your existing bumpers are around 110mm and the gap to the leveller is right, stay with that depth.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the bumper come with the back plate?\u003c\/summary\u003e\u003cp\u003eYes. The back plate is the steel cradle that holds the face and rubber, and it is part of the 63kg assembly. You only need the separate Back Plate option as a replacement or a spare.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it delivered?\u003c\/summary\u003e\u003cp\u003eOrders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. Plan for a 63kg item when receiving each unit.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your part above and add the quantity you need. Order before 2pm, Monday to Friday, for same-day dispatch with Express UK Delivery. Buying for several doors, or need a replacement face or rubber? Call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 760 x 275 x 165mm","offer_id":45580218859818,"sku":"INDSP01","price":924.9,"currency_code":"GBP","in_stock":true},{"title":"Back Plate - 760 x 270 x 130mm","offer_id":45580652773674,"sku":"IND_SPC50718","price":354.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/deep-rubber-steel-dock-bumper-760mm-concrete-dock-wall.jpg?v=1793817126"},{"product_id":"rubber-steel-dock-bumper-760-x-270-x-110mm","title":"Rubber \u0026 Steel Dock Bumper 760 x 270 x 110mm with Free Fixings | Sliding No-Hole Yellow UHMWPE Face, Galvanised Steel Cradle | HGV Loading Bay","description":"\u003cp\u003e\u003cstrong\u003eA reversing HGV puts its full weight into your dock wall, and the trailer keeps moving after it lands: it sinks as a forklift drives on and rises as the forklift comes off.\u003c\/strong\u003e This rubber and steel dock bumper is built for that movement. Fix one either side of the dock leveller and the trailer meets a smooth yellow face that slides with it, with a rubber packer behind to take the impact and a galvanised steel cradle to carry the load back into the structure. It suits distribution centres, factories and any busy goods-in door where a torn fixed buffer has become a repeat job.\u003c\/p\u003e\n\u003cp\u003eThis dock bumper has a large impact area with no holes in the UHMWPE face plate for the back of the truck to snag on. The 50mm thick face can slide freely up and down in its steel cradle back plate. Compresses 11mm under 15 tonne load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e760mm by 270mm by 110mm\u003c\/li\u003e\n\u003cli\u003eWeight 46kg\u003c\/li\u003e\n\u003cli\u003eFree fixings included: six M16 anchor studs and two washers\u003c\/li\u003e\n\u003cli\u003eCost-effective solution to protect your building from damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-dock-bumper-760-x-270-x-110mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the sliding dock bumper 760 x 270 x 110mm with six hole positions, end view and the yellow face lifted out of its galvanised steel cradle\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003ch3\u003eThe face moves with the trailer\u003c\/h3\u003e\n\u003cp\u003eA fixed rubber buffer grips the trailer and gets dragged each time the suspension rises and falls, which is what tears it. Here the 50mm face plate is free to slide up and down inside its steel cradle, so that movement is taken by a low friction surface instead of the rubber.\u003c\/p\u003e\n\u003ch3\u003eNothing on the face to catch\u003c\/h3\u003e\n\u003cp\u003eThe UHMWPE (ultra high molecular weight polyethylene) face has no holes, so there are no bolt heads or recesses for the back of a truck to snag on across its whole 750mm length. All six fixing holes sit in the back plate, behind the face. The yellow also gives a driver a clear reference point when reversing.\u003c\/p\u003e\n\u003ch3\u003eA known compression figure\u003c\/h3\u003e\n\u003cp\u003eThe assembly compresses 11mm under a 15 tonne load, so you can check the stand-off against your own dock and leveller rather than guessing.\u003c\/p\u003e\n\u003ch3\u003eRepair the part that is damaged\u003c\/h3\u003e\n\u003cp\u003eThe back plate and angle bracket are sold separately on this page, so one bent plate does not mean ordering a complete assembly.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eThis bumper goes on the dock face either side of a dock leveller or door opening, at distribution centres, manufacturing plants and goods-in bays taking articulated trailers. At 760mm it covers more height than a 465mm bumper, which helps where trailer bed heights vary.\u003c\/p\u003e\n\u003ch3\u003eStopping trailers over-riding the dock\u003c\/h3\u003e\n\u003cp\u003eWhere a trailer bed sits low enough to ride over the leveller, a bumper at dock height is not enough. The angle bracket lets the back plate and bumper be fixed 150mm above dock height. M24 bolts pass through the two 26mm holes at the top of the back plate into the bracket's threaded holes, and the bracket's two 26mm clear holes are left for fixing it down. The gallery shows the bracket and plate fitted together.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDock Bumper\u003c\/th\u003e\n\u003cth\u003eBack Plate\u003c\/th\u003e\n\u003cth\u003eAngle Bracket\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhat you get\u003c\/td\u003e\n\u003ctd\u003eComplete unit: back plate, rubber packer and yellow face\u003c\/td\u003e\n\u003ctd\u003eSteel cradle only\u003c\/td\u003e\n\u003ctd\u003eBracket only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e760 x 270 x 110mm\u003c\/td\u003e\n\u003ctd\u003eApprox 760 x 270 x 85mm\u003c\/td\u003e\n\u003ctd\u003eApprox 250 x 150 x 150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e46kg\u003c\/td\u003e\n\u003ctd\u003e26kg\u003c\/td\u003e\n\u003ctd\u003e9.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eUHMWPE, rubber and galvanised steel\u003c\/td\u003e\n\u003ctd\u003eGalvanised steel\u003c\/td\u003e\n\u003ctd\u003e12mm steel, red powder coat, RAL 3020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace\u003c\/td\u003e\n\u003ctd\u003e50mm thick, 750mm long, yellow, no holes, slides in cradle\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression\u003c\/td\u003e\n\u003ctd\u003e11mm under 15 tonne load\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRubber packer\u003c\/td\u003e\n\u003ctd\u003eSBR and natural rubber blend, 70-75 Shore A, +\/- 5, -15°C to 70°C\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing holes\u003c\/td\u003e\n\u003ctd\u003e6, through the back plate\u003c\/td\u003e\n\u003ctd\u003e6: 2 x 26mm at the top for M24 bolts, 2 x 20mm halfway down, 2 x 20mm at the bottom\u003c\/td\u003e\n\u003ctd\u003e4: 2 x M24 threaded, 2 x 26mm clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHole centres\u003c\/td\u003e\n\u003ctd\u003eAbout 150mm across, 325mm apart\u003c\/td\u003e\n\u003ctd\u003eAbout 150mm across, 325mm apart, 55mm from each end, 60mm from the side\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand-off from wall\u003c\/td\u003e\n\u003ctd\u003e110mm\u003c\/td\u003e\n\u003ctd\u003e85mm\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixings\u003c\/td\u003e\n\u003ctd\u003eFree fixings included: 6 M16 through-anchor studs, 125 to 140mm long, and 2 washers (50mm OD, 16mm ID, 3mm thick)\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the Right Option\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNew loading bay, or a worn or torn buffer to replace\u003c\/td\u003e\n\u003ctd\u003eDock Bumper, normally one each side of the door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers riding up over the dock leveller\u003c\/td\u003e\n\u003ctd\u003eDock Bumper plus one Angle Bracket for each bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCradle damaged, or a spare plate to hold on site\u003c\/td\u003e\n\u003ctd\u003eBack Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket lost or damaged on an existing assembly\u003c\/td\u003e\n\u003ctd\u003eAngle Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers still catching the building, and you want 50mm more stand-off\u003c\/td\u003e\n\u003ctd\u003eThe \u003ca href=\"\/products\/deep-sliding-dock-bumper-face-750-x-250-x-100mm\"\u003edeep 750 x 250 x 100mm replacement face\u003c\/a\u003e, which swaps in for the 50mm face in this cradle and takes the bumper to about 160mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a different size?\u003c\/strong\u003e The \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm bumper\u003c\/a\u003e gives the same height with a deeper stand-off from the wall. The \u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm bumper\u003c\/a\u003e is the shorter option in this style. If you want a similar length without a steel cradle wrapped around the face, compare the \u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm low friction bumper\u003c\/a\u003e and the plain rubber \u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003e750 x 250 x 100mm bumper\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e. Measure your existing stand-off before changing depth, because it sets the gap between trailer and leveller.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eAt 46kg this is a two-person or lifting-aid job. Fix the back plate into sound structure. The supplied M16 through anchors are for fixing directly to sound concrete, so have a competent installer confirm that the wall and anchors suit the loads at your dock, because the bumper can only pass on what the wall can take. Mark out from the drawing above, then offer the back plate up and check the holes against it before you drill. The two washers suit the larger 26mm holes at the top, where a 16mm stud would otherwise sit loose.\u003c\/p\u003e\n\u003cp\u003eInspect the face, packer and fixings as part of your routine dock checks and replace damaged parts before the steel starts taking hits. A bumper protects the building and the vehicle from routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many dock bumpers do I need per door?\u003c\/summary\u003e\u003cp\u003eMost loading bays use two, one on each side of the dock leveller, so the trailer lands evenly. The price shown is for one unit, so add quantity 2 for a typical door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat fixings come with the bumper?\u003c\/summary\u003e\u003cp\u003eThe Dock Bumper option includes 6 M16 through-anchor studs, 125 to 140mm long, matching the six holes in the back plate, and 2 washers (50mm OD, 16mm ID, 3mm thick), for fixing directly to sound concrete. The M24 bolts used with the angle bracket are not part of this set.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is UHMWPE and why use it on a dock bumper?\u003c\/summary\u003e\u003cp\u003eUHMWPE is ultra high molecular weight polyethylene, a tough plastic with a slippery, wear-resistant surface. On this bumper it forms the part the trailer touches, so it slides against the trailer rather than dragging the rubber behind it.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I buy just the back plate or the angle bracket?\u003c\/summary\u003e\u003cp\u003eYes. Pick Back Plate or Angle Bracket from the options above. The back plate is the same cradle used in this bumper, and the bracket raises the assembly 150mm above dock height.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat hole pattern does the back plate have?\u003c\/summary\u003e\u003cp\u003eSix holes in two rows, about 150mm across and 325mm apart: two at the top at 26mm for M24 bolts, two halfway down and two at the bottom at 20mm. The top pair also connect to the angle bracket when you mount above the dock.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it come assembled and how is it delivered?\u003c\/summary\u003e\u003cp\u003eThe Dock Bumper option is supplied as a complete unit of back plate, packer and face plate, with free fixings included. We dispatch the same day on orders placed before 2pm, Monday to Friday, by Express UK Delivery. Plan for a 46kg item when receiving each unit.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your part above and add the quantity you need. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, or for a replacement face or packer, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through the parts with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 760 x 270 x 110mm","offer_id":45580124258602,"sku":"INDSP05","price":756.9,"currency_code":"GBP","in_stock":true},{"title":"Back Plate - 760 x 270 x 85mm","offer_id":45580664078634,"sku":"IND_SPC50716","price":338.9,"currency_code":"GBP","in_stock":true},{"title":"Angle Bracket - 250 x 150 x 150mm","offer_id":45580144902442,"sku":"IND_SPC50717","price":125.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-dock-bumper-yellow-face-concrete-loading-dock-wall-760mm.jpg?v=1793816092"},{"product_id":"rubber-steel-dock-bumper-465-x-275-x-110mm","title":"Sliding Dock Bumper 465 x 275 x 110mm with Free Fixings | No-Hole Yellow UHMWPE Face, Rubber Packer, Galvanised Steel Cradle | HGV Loading Bay","description":"\u003cp\u003e\u003cstrong\u003eEvery reversing HGV finds the same spot on your dock. This sliding dock bumper takes that hit instead of your concrete, your leveller and the back of the trailer.\u003c\/strong\u003e It suits warehouse managers, site maintenance teams and loading bay installers who need a bumper built for daily trailer contact.\u003c\/p\u003e\n\u003cp\u003eThis dock bumper has a large impact area with no holes in the UHMWPE face plate for the back of the truck to snag on. The 50mm thick face can slide freely up and down in its galvanised steel cradle back plate. Compresses 11mm under 15 tonne load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e465mm by 275mm by 110mm\u003c\/li\u003e\n\u003cli\u003eWeight 27kg\u003c\/li\u003e\n\u003cli\u003eFree fixings included: four M16 anchor studs and two washers\u003c\/li\u003e\n\u003cli\u003eCost-effective solution to protect your building from damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-dock-bumper-465-x-275-x-110mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the sliding dock bumper 465 x 275 x 110mm with hole positions, end view and the yellow face lifted out of its galvanised steel cradle\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003ch3\u003eThe face moves with the trailer\u003c\/h3\u003e\n\u003cp\u003eA trailer does not stay still at the dock. It sinks and rises on its suspension each time a forklift drives on and off. On a fixed bumper, that movement drags the trailer's rear frame up and down the same patch of material. Here the 50mm face travels with the trailer inside its steel cradle, so much less of that movement becomes scraping.\u003c\/p\u003e\n\u003ch3\u003eA low friction face with nothing to catch\u003c\/h3\u003e\n\u003cp\u003eUHMWPE (ultra high molecular weight polyethylene) has a very low coefficient of friction, so steel slides across it instead of gripping it. There are no bolt holes in the face, which leaves no edge for a trailer's frame or underrun bar to snag on. The yellow colour also gives a driver a clear reference point when reversing.\u003c\/p\u003e\n\u003ch3\u003eRubber behind, steel around\u003c\/h3\u003e\n\u003cp\u003eBehind the face sits a rubber packer, and the assembly compresses 11mm under a 15 tonne load. The galvanised steel cradle holds both parts and carries the load back into the dock wall through its fixings. Its base is 12mm thick.\u003c\/p\u003e\n\u003ch3\u003eReplace the wearing part, not the whole unit\u003c\/h3\u003e\n\u003cp\u003eThe back plate stays bolted to the wall. When the face has worn, it comes out of the cradle and the new part goes in, with no new holes to drill.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eThis type of bumper is fitted at distribution centres, manufacturing plants and any goods-in bay taking articulated trailers. It usually goes on the dock face either side of a dock leveller or door opening, and most bays need two.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDock Bumper\u003c\/th\u003e\n\u003cth\u003eBack Plate\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall size\u003c\/td\u003e\n\u003ctd\u003e465 x 275 x 110mm\u003c\/td\u003e\n\u003ctd\u003eApprox 470 x 275 x 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e27kg\u003c\/td\u003e\n\u003ctd\u003e16.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eUHMWPE, rubber and galvanised steel\u003c\/td\u003e\n\u003ctd\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace\u003c\/td\u003e\n\u003ctd\u003e50mm thick, 450mm long, yellow, no holes\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression\u003c\/td\u003e\n\u003ctd\u003e11mm under 15 tonne load\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRubber packer\u003c\/td\u003e\n\u003ctd\u003eSBR and natural rubber blend, 70-75 Shore A, +\/- 5, -15°C to 70°C\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixing holes\u003c\/td\u003e\n\u003ctd\u003e4, through the back plate\u003c\/td\u003e\n\u003ctd\u003e4: 2 x 26mm at the top, 2 x 20mm at the bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHole centres\u003c\/td\u003e\n\u003ctd\u003eAbout 350 x 145mm\u003c\/td\u003e\n\u003ctd\u003eAbout 350 x 145mm, top pair 55mm from the top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand-off from wall\u003c\/td\u003e\n\u003ctd\u003e110mm\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixings\u003c\/td\u003e\n\u003ctd\u003eFree fixings included: 4 M16 through-anchor studs, 125 to 140mm long, and 2 washers, 50mm OD\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the Right Option\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eChecking the size:\u003c\/strong\u003e you may also see this bumper quoted as 450 x 260 x 110mm or 470 x 275 x 110mm. The 450mm figure matches the height of the face, while the steel cradle is taller and wider, so allow up to 470 x 275mm of flat, sound wall and 110mm of depth off the dock face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Dock Bumper\u003c\/strong\u003e for a new bay, or to replace a complete unit. It is the full assembly: sliding face, rubber packer and steel cradle back plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Back Plate\u003c\/strong\u003e only if your cradle has been damaged and the face is still serviceable, or if you want to fix the steel ahead of the rest of the job. It is the backing plate used in our Dock Bumper, with 4 fixing holes: the 2 at the top are 26mm to allow for M24 bolts to fix to an above dock angle bracket, if required, and the 2 at the bottom are 20mm.\u003c\/p\u003e\n\u003cp\u003eIf you want more face area, compare the \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm\u003c\/a\u003e and \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm\u003c\/a\u003e versions. For lighter duty bays, see the \u003ca href=\"\/products\/dock-bumper-a003\"\u003estandard rubber dock bumper\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eFit the bumper to sound concrete using four M16 through-anchor studs and two washers. Mark out from the drawing above, then offer the back plate up and check the holes against it before you drill. Set the height so the trailer's rear frame meets the face across its travel, and check the trailers you actually receive before drilling. At 27kg this is a two-person lift.\u003c\/p\u003e\n\u003cp\u003eCheck the face and fixings during routine bay inspections. This bumper protects against slow reversing contact. It does not replace wheel guides, wheel chocks or safe docking procedures, and damaged concrete should be repaired before fitting.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with the dock bumper: four M16 through-anchor studs, 125 to 140mm long, and two 50mm OD washers, for fitting to sound concrete. If you are fixing to steelwork or an above dock bracket, call us before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the dock bumper come with the back plate?\u003c\/summary\u003e\u003cp\u003eYes. The back plate is the steel cradle that holds the sliding face and packer, and it is part of the 27kg assembly. You only need the separate Back Plate option as a replacement or a spare.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per loading bay?\u003c\/summary\u003e\u003cp\u003eMost bays use two, one either side of the leveller or door opening. The price shown is for one bumper, so add two to your basket for a standard bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy choose a sliding face over solid rubber?\u003c\/summary\u003e\u003cp\u003eTrailers rise and fall as they are loaded. A solid rubber bumper is scraped by that movement, while this face moves with the trailer and has a low friction surface. It suits busy bays where a plain rubber bumper keeps wearing out.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I mount it above the dock?\u003c\/summary\u003e\u003cp\u003eThe two 26mm holes at the top of the back plate take M24 bolts for fixing to an above dock angle bracket, if your bay requires one. The bracket is not part of this listing, so call us on 01744 520 110 for advice.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eOrder before 2pm, Monday to Friday, for same-day dispatch with Express UK Delivery. Buying for several bays, or need a replacement face or packer? Call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 465 x 275 x 110mm","offer_id":45579971723562,"sku":"INDSP15","price":529.9,"currency_code":"GBP","in_stock":true},{"title":"Back Plate - 470 x 275 x 80mm","offer_id":45580628197674,"sku":"IND_SPC50715","price":229.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-dock-bumper-hero-hgv-trailer-docked-loading-bay-7002c138-12a4-4fb1-b314-de05e981c9e9.jpg?v=1793625821"},{"product_id":"sbr-rubber-dock-bumper-750-x-250-x-115mm","title":"Low Friction Rubber Dock Bumper 750 x 250 x 115mm with Fixings | Replaceable Yellow UHMWPE Face, SBR Rubber | HGV Loading Bay","description":"\u003cp\u003eA reversing HGV lands on your dock wall with its full weight, then keeps moving: the trailer sinks as a forklift drives on and rises as it comes off. This 750 x 250 x 115mm dock bumper is built for both. An SBR rubber body takes the landing, and a yellow low-friction UHMWPE front plate takes the rubbing that follows. It is similar in many respects to a standard 750mm rubber dock bumper, with the plate added. When that plate wears, you replace the plate and keep the rest of the bumper. It suits distribution centres, factories and goods-in doors where plain rubber buffers keep tearing, and you can buy the complete bumper or either part from this page.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/low-friction-dock-bumper-750-x-250-x-115mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the low friction dock bumper 750 x 250 x 115mm with side, end and face views, three hole positions and the yellow plate lifted off the rubber element\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a plated bumper outlasts plain rubber\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe plate takes the wear.\u003c\/strong\u003e Plain rubber grips the back of a trailer and gets dragged every time the suspension moves, which is how a buffer ends up torn. Here the trailer meets 35mm of slippery UHMWPE instead, so that movement happens against a low-friction surface and the rubber is left to do the cushioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe rubber wraps the plate.\u003c\/strong\u003e The front plate sits 20mm into a recess in the rubber body and stands 15mm proud, with a rubber rim around it, and the housing adds strength as a trailer compresses the bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fixings sit below the surface.\u003c\/strong\u003e Each of the three holes is 70mm wide for the first 80mm from the face, then 27mm through to the wall. The fixing head sits down inside the bumper, not on the surface the trailer touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou only replace what is damaged.\u003c\/strong\u003e The front plate and the rubber element are each sold on their own. A worn face does not mean buying a complete bumper, and it does not mean drilling a new set of holes in the dock wall.\u003c\/p\u003e\n\u003cp\u003eIt is a cost-effective way to protect your building from damage. No compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch3\u003eDock Bumper\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eComplete bumper: SBR rubber element and yellow UHMWPE front plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eFixings included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e750 x 250 x 115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e22kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace\u003c\/th\u003e\n\u003ctd\u003e35mm thick UHMWPE, low friction, replaceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber\u003c\/th\u003e\n\u003ctd\u003eMoulded SBR and natural rubber blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber hardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber service temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eThree in a line, 275mm centres, 100mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003e70mm wide and 80mm deep from the face, then 27mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFront Plate\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eYellow UHMWPE plate only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 710 x 210 x 35mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRubber Element\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eRubber body only, no front plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 745 x 250 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNew loading bay, or a torn buffer to replace\u003c\/td\u003e\n\u003ctd\u003eDock Bumper, normally one each side of the leveller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYellow face worn, gouged or split, rubber still sound\u003c\/td\u003e\n\u003ctd\u003eFront Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRubber torn or perished, plate still good\u003c\/td\u003e\n\u003ctd\u003eRubber Element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed something different? The \u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-2\"\u003e450 x 250 x 115mm bumper\u003c\/a\u003e is the shorter version with a low friction panel. The \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm bumper\u003c\/a\u003e stands further off the wall. The \u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-250-x-750-x-100mm-extra-tall-hgv-loading-bay-impact-protector\"\u003e750 x 250 x 100mm rubber bumper\u003c\/a\u003e has no plate, and suits lighter-use doors where trailers land and stay still. Measure your existing stand-off before changing depth, because it sets the gap between the trailer and the leveller.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark out from the drawing above: three holes at 275mm centres, with the first 100mm in from the end. Offer the bumper up and check the holes against it before you drill. Fix into sound concrete or structure, and have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what the wall can take. Most docks fit them upright, level with each other, either side of the leveller. At 22kg one person can lift it, but two make it far easier to hold in line while fixing.\u003c\/p\u003e\n\u003cp\u003eCheck the face, rubber and fixings during your routine dock inspections. Replace the plate before it wears through to the rubber. A dock bumper protects the building and vehicle from routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many dock bumpers do I need per door?\u003c\/summary\u003e\u003cp\u003eMost loading bays use two, one each side of the dock leveller, so the trailer lands evenly on both. The price shown is for one bumper, so add a quantity of 2 for a typical door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is UHMWPE and why use it on a dock bumper?\u003c\/summary\u003e\u003cp\u003eUHMWPE is ultra-high molecular weight polyethylene, a tough plastic with a slippery, wear-resistant surface. Here it forms the part the trailer touches, so the trailer slides against it rather than dragging on the rubber behind it.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I buy just the front plate or the rubber element?\u003c\/summary\u003e\u003cp\u003eYes. Choose Front Plate or Rubber Element from the options at the top of this page. Both are the parts used in this 750 x 250 x 115mm bumper, so they are the ones to order when one part is damaged and the other is still sound.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the plate better than a plain rubber bumper?\u003c\/summary\u003e\u003cp\u003eOn doors where trailers move while being loaded, usually yes, because plain rubber takes that dragging directly and the plate takes it here instead. On a lightly used door a plain rubber bumper costs less and can be enough, so match it to how busy the door is.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it come assembled and are fixings included?\u003c\/summary\u003e\u003cp\u003eThe Dock Bumper option is the complete bumper, rubber element and front plate together, with fixings included. We dispatch the same day on orders placed before 2pm, Monday to Friday, by Express UK Delivery.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your part at the top of the page and add the quantity you need. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through the parts with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 750 x 250 x 115mm","offer_id":45580700090666,"sku":"INDSP20","price":395.9,"currency_code":"GBP","in_stock":true},{"title":"Front Plate - 710 x 210 x 35mm","offer_id":45580738199850,"sku":"IND_SPC50714","price":161.9,"currency_code":"GBP","in_stock":true},{"title":"Rubber Element - 745 x 250 x 100mm","offer_id":45580700156202,"sku":"INDSP21","price":138.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-750-x-250-x-115mm-hgv-loading-bay.jpg?v=1793625721"},{"product_id":"galvanized-steel-dock-bumper-470-x-270-x-66mm","title":"Low Profile Dock Bumper 470 x 270 x 66mm with Free Fixings | Replaceable Yellow UHMWPE Face, Galvanised Steel Back Plate | HGV Loading Bay","description":"\u003cp\u003eEvery millimetre between the back of a trailer and the dock edge is a gap your forklift and pallet truck have to cross. Plenty of dock bumpers stand 110mm or more off the wall. This one stands just 66mm, so the HGV backs in closer, while a solid yellow UHMWPE plate in a galvanised steel channel takes the contact and keeps the trailer off your concrete. Fix one either side of the dock leveller on a new bay, or use a pair to replace worn buffers at a goods-in door where the trailer is sitting further out than you would like.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/low-profile-dock-bumper-470-x-270-x-66mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the low profile dock bumper 470 x 270 x 66mm with hole positions, end view and the yellow front plate lifted out of its galvanised steel back plate\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a 66mm low profile dock bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe trailer sits closer to the dock.\u003c\/strong\u003e The whole unit, back plate and front plate together, measures 66mm from the wall to the face. That keeps the stand-off short, which matters most where the dock leveller has little spare reach. The comparison image in the gallery shows the difference against 110mm and 165mm bumpers, drawn to the same scale.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDamage goes to the part you can replace.\u003c\/strong\u003e The galvanised back plate has returns along both long edges that hold the yellow front plate, which is not bolted through its face. It is the sacrificial part. When it wears or takes a hit, it can be easily removed and replaced while the back plate stays undamaged on the wall, so a damaged face does not have to mean a new fixing job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe trailer slides instead of grabbing.\u003c\/strong\u003e UHMWPE is durable and has a very low coefficient of friction, so the back of the trailer can slide along the face as its height changes during loading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNothing on the face to catch.\u003c\/strong\u003e The four fixing holes are in the steel back plate, behind the front plate. The trailer meets one flat surface, 225mm wide, with no bolt heads or recesses to snag on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for an open yard, and easy to see.\u003c\/strong\u003e Galvanised steel suits a loading bay exposed to rain, and the highly visible yellow face helps a driver line up in the mirrors.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eDistribution centres, parcel depots, food and drink goods-in, factory despatch bays and merchant yards: anywhere HGVs reverse onto a raised concrete dock and the trailer needs to finish as close to the building as possible.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised back plate, one yellow front plate and four anchor bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e470 x 270 x 66mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19kg (back plate 14kg, front plate 5kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront plate\u003c\/th\u003e\n\u003ctd\u003eYellow UHMWPE, 450 x 250 x 50mm, with a 225mm wide contact face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel, 270mm wide and 35mm deep, with returns that hold the front plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eFour, 16mm through with a 30mm countersink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003eAbout 350 x 145mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: four M10 x 100 countersunk anchor bolts, which need a 16mm drill bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e66mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad or compression rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the right dock bumper\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailer must sit as close as possible, with a hard-wearing yellow face\u003c\/td\u003e\n\u003ctd\u003eThis bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSame shallow depth, but you prefer a black rubber front plate\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/shallow-dock-bumper-465-x-270-x-66mm\"\u003eShallow dock bumper 465 x 270 x 66mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore depth, with a rubber packer behind a sliding face\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm\u003c\/a\u003e or \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA much deeper stand-off from the wall\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBefore you order, measure your existing stand-off and check it against your dock leveller. Going shallower brings the trailer closer, so check that the trailers you handle still clear the leveller and the building. If your bay takes hard, repeated impacts, or trailers that rise and sink a long way during loading, look at the deeper sliding bumpers, because this one has less depth to work with.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eThe fixing holes sit behind the yellow plate, so fix the back plate first and fit the front plate afterwards. Mark out from the drawing above, then offer the back plate up and check the holes against it before you drill, and use a 16mm drill bit for the anchor bolts. Fix through all four holes into sound concrete, at the height your trailers actually make contact, and have a competent installer confirm that the wall and anchors suit the loads at your dock.\u003c\/p\u003e\n\u003cp\u003eCheck the plate and fixings during routine dock inspections, and replace the plate before it wears back to the steel. A bumper protects the building and the vehicle from routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many dock bumpers do I need per door?\u003c\/summary\u003e\u003cp\u003eMost loading bays use two, one on each side of the dock leveller, so the trailer lands evenly. The price shown is for one bumper, so add quantity 2 for a typical door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the 66mm include the steel back plate?\u003c\/summary\u003e\u003cp\u003eYes. 66mm is the full depth from the wall to the front of the yellow plate, so that is the stand-off you get before the trailer touches. Allow for wear on the plate over time.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I replace just the yellow plate?\u003c\/summary\u003e\u003cp\u003eYes. The front plate can be easily removed and replaced if it becomes damaged, and the back plate stays fixed to the wall. Call 01744 520 110 or email us for a replacement plate.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I change to a rubber face later?\u003c\/summary\u003e\u003cp\u003eYes. The same back plate also takes a rubber front plate, which you can order from the \u003ca href=\"\/products\/shallow-dock-bumper-465-x-270-x-66mm\"\u003e465 x 270 x 66mm shallow dock bumper\u003c\/a\u003e listing.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included with the bumper: four M10 x 100 countersunk anchor bolts, which need a 16mm drill bit. The back plate has four holes, 16mm through with a 30mm countersink, at about 350 x 145mm centres.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow quickly can you deliver?\u003c\/summary\u003e\u003cp\u003eOrders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. Plan for a 19kg item for each bumper when receiving the delivery.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need above, normally two per door. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 470 x 270 x 66mm","offer_id":45579237425450,"sku":"INDSP28","price":503.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/low-profile-yellow-dock-bumpers-pair-either-side-leveller-470x270x66.jpg?v=1793797350"},{"product_id":"loading-bay-dock-bumper-750-x-250-x-100mm","title":"Heavy Duty Rubber Dock Bumper 750 x 250 x 100mm with Fixings | 3 Fixing Holes | HGV Loading Bay Buffer","description":"\u003cp\u003e\u003cstrong\u003eTrailers that rise and drop on their suspension can catch the edge of a short bumper and rip it off the wall.\u003c\/strong\u003e This 750 x 250 x 100mm rubber dock bumper gives them a much taller face to meet, so the contact stays in the middle of the block. It weighs 19.5kg, bolts to your dock face through three recessed holes, and comes with free fixings included. If you run a busy goods-in bay or a mixed fleet, and shorter bumpers keep tearing or coming away, this is the one to fit. The price shown is for one bumper, and most doors need two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-750-x-250-x-100mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the 750 x 250 x 100mm rubber dock bumper with side, face, end and 3D views\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHeight stops under-riding.\u003c\/strong\u003e At 750mm tall, the bumper reaches far enough down that an HGV is much less likely to ride under it and pull it off the wall. Fit it with a bracket and you can also help stop the vehicle riding over the top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree fixings, not two.\u003c\/strong\u003e The holes run in one line, 100mm in from each end and 275mm apart. That spreads the pull along the full length of the block.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe bolts sit below the surface.\u003c\/strong\u003e Each hole is 75mm wide for the first 50mm, then 30mm through to the wall. The bolt head and washer sit inside the recess, with rubber standing in front of them, away from the face the trailer touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRubber that suits an open yard.\u003c\/strong\u003e It is a durable, solid moulded block of SBR and natural rubber, with a hardness of 70-75 Shore A (+\/- 5), good tear resistance and a service temperature of -15°C to 70°C.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet your own stand-off.\u003c\/strong\u003e The bumper stands 100mm off the wall. Packers bring that out to 115, 120 or 150mm, so you can match the projection your dock and trailers need.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it on concrete dock faces beside levellers, on raised loading platforms at distribution centres, and at factory goods-in doors that see trailers of different heights. It also suits walls where a shorter bumper has already been torn off. Fit one each side of a door, so allow two per door when you set your quantity.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne rubber dock bumper, with fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e750 x 250 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSBR and natural rubber blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e3,000 psi, typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTear resistance\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eThree, in one line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e275mm, with the end holes 100mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003e75mm wide and 50mm deep, then 30mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing size\u003c\/th\u003e\n\u003ctd\u003eM24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDimensions are typical, as moulded rubber can vary slightly.\u003c\/p\u003e\n\u003ch2\u003eParts that fit this bumper\u003c\/h2\u003e\n\u003cp\u003eChoose these from the Size menu at the top of the page. You can order them with a bumper, or on their own.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-750mm-packers-back-plate-front-plate-parts-guide.jpg?width=1200\" alt=\"Guide to the packers, spring back plate and steel front plate that fit this 750mm dock bumper, with sizes and stand-off options\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e15mm rubber packer\u003c\/strong\u003e\u003cbr\u003e750 x 250 x 15mm, 3.8kg\u003c\/td\u003e\n\u003ctd\u003ePlain, no holes. Fine adjustment of stand-off without losing the bumper's ability to compress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e20mm rubber packer\u003c\/strong\u003e\u003cbr\u003e750 x 250 x 20mm, 5kg\u003c\/td\u003e\n\u003ctd\u003ePlain, no holes. A little more stand-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e50mm rubber packer\u003c\/strong\u003e\u003cbr\u003e750 x 250 x 50mm, 12kg\u003c\/td\u003e\n\u003ctd\u003eThe most spacing. Three holes in the bumper's pattern: 75mm recess, 20mm deep, then 28mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSpring back plate\u003c\/strong\u003e\u003cbr\u003e965 x 255 x 66mm, 50kg\u003c\/td\u003e\n\u003ctd\u003eSteel. Lets the bumper slide down as the trailer is loaded, then return when it moves away\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSteel front plate\u003c\/strong\u003e\u003cbr\u003e760 x 260 x 60mm, 26.5kg\u003c\/td\u003e\n\u003ctd\u003eSide cheeks make it much stronger than a flat plate. The steel takes the rubbing while the bumper behind compresses. Holes at 280mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePackers are a cost-effective way to increase the bumper depth. The 15mm and 20mm packers are drilled on site to match the bumper. The spring back plate is compatible with a variety of 750mm high dock bumpers and comes with fixings for attaching this one; other fixings are needed to attach the assembly to the loading bay. The front plate takes a slightly smaller M24 washer than the bumper does, so ask us if you are fitting one.\u003c\/p\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailer heights vary, or shorter bumpers keep tearing off\u003c\/td\u003e\n\u003ctd\u003eThis 750 x 250 x 100mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA standard dock wall and trailers that back in square\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a003\"\u003e450 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore height than that, but less than 750mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a006\"\u003e600 x 250 x 108mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers rubbing up and down at 750mm height\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm low friction faced bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou want damaged bumpers changed faster than bolts in concrete allow\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-dock-bumper-back-plate-4\"\u003e750 x 250 x 15mm back plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicles riding over the top of the bumper\u003c\/td\u003e\n\u003ctd\u003eBack plate and angle bracket, which sit the assembly 150mm above dock height. Call us to arrange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eYou need 750 x 250mm of clear, sound surface, in line with the part of the trailer that reaches the dock first. Mark out from the dimension drawing, then offer the bumper up and check the holes before you drill. It weighs 19.5kg, so plan for two people. Allow longer fixings if you fit a packer. Have a competent installer confirm that the wall and anchors suit your dock, because a bumper can only pass on what its fixing point can take.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber and fixings during routine dock inspections, and replace the bumper once it is torn or worn back towards the bolt heads. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price is for one bumper. Most doors use one on each side, so set the quantity to 2 for each door you are protecting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included with the bumper. If your wall needs a particular type of anchor, call us before you order. The holes are 30mm through, opening to 75mm wide for the bolt head and washer.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it replace my worn 750mm bumper?\u003c\/summary\u003e\u003cp\u003eCheck your existing holes first. This bumper's are 275mm apart and 100mm in from each end, on a 750 x 250mm block. If yours match, it should line up with your existing fixing points.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need a back plate or front plate?\u003c\/summary\u003e\u003cp\u003eNo. The bumper can fix directly to a sound wall through its three holes. A front plate takes the rubbing on a busy door, and a spring back plate lets the bumper travel with the trailer. Both are optional.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is it made from?\u003c\/summary\u003e\u003cp\u003eA blend of SBR (styrene-butadiene rubber) and natural rubber, which is a general-purpose dock bumper compound. If trailers rub up and down on the face rather than meeting it square, look at our low friction faced bumper instead.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your bumper or part from the Size menu and add the quantity you need. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 750 x 250 x 100mm","offer_id":45579782816042,"sku":"INDSP32","price":149.9,"currency_code":"GBP","in_stock":true},{"title":"Packer - 750 x 250 x 15mm","offer_id":45592417534250,"sku":"IND_SPC50707","price":37.9,"currency_code":"GBP","in_stock":true},{"title":"Packer - 750 x 250 x 20mm","offer_id":45579813454122,"sku":"IND_SPC50708","price":48.9,"currency_code":"GBP","in_stock":true},{"title":"Packer - 750 x 250 x 50mm","offer_id":45579813486890,"sku":"IND_SPC50709","price":71.9,"currency_code":"GBP","in_stock":true},{"title":"Spring Back Plate - 965 x 255 x 66mm","offer_id":45580676596010,"sku":"IND_SPC50710","price":520.9,"currency_code":"GBP","in_stock":true},{"title":"Front Plate - 760 x 260 x 60mm","offer_id":45580749799722,"sku":"IND_SPC50711","price":236.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-750mm-hgv-trailer-loading-dock.jpg?v=1793711784"},{"product_id":"dock-bumper-a014","title":"L Shaped Rubber Dock Bumper 450 x 450 x 100mm – Loading Dock Corner Protection","description":"\u003cp\u003eA standard rectangular dock buffer protects the face of your loading dock but leaves its top edge exposed. This L shaped SBR rubber dock bumper covers both in one piece: one 450mm arm runs along the top of the dock and the other runs down the face. It measures 450 x 450 x 100mm, weighs 14kg and bolts on at three points, with free fixings included. It stands 100mm proud of the wall, so a reversing trailer meets rubber before it reaches your concrete or dock steel. It suits site managers and maintenance teams protecting goods-in doors at warehouses, distribution centres and factories, along with contractors refurbishing worn dock corners.\u003c\/p\u003e\n\u003ch2\u003eWhy an L shape works at the dock corner\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIt covers the edge other buffers miss.\u003c\/strong\u003e A rectangular buffer guards a single patch of wall. The corner above and beside it stays bare, and that is where a badly aligned trailer can chip the concrete or bend the dock frame. With a 200mm wide arm in each direction, this bumper wraps that area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne moulding, no joints.\u003c\/strong\u003e Two separate buffers butted together leave a seam for a trailer to catch. Here the corner is a single solid block, held by three bolts spread across both arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe bolts sit below the face.\u003c\/strong\u003e Each fixing hole has a 70mm recess, 50mm deep, so the bolt head and washer sit down inside the rubber rather than on the surface the trailer touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe same part fits either corner.\u003c\/strong\u003e The shape and hole pattern are symmetrical, so a quarter turn takes it from the left of a door to the right. You do not need to order a left and a right hand version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat it does not do.\u003c\/strong\u003e There is no back plate or front plate for this bumper, so when it is worn you replace the whole unit. No compression or load rating is published for this line. If your dock needs a sliding face or a stated load figure, see the options further down.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProtects the top edge and the face of the dock in one piece\u003c\/li\u003e\n\u003cli\u003eThree recessed bolt positions on 250mm centres\u003c\/li\u003e\n\u003cli\u003eFits a left or right hand corner\u003c\/li\u003e\n\u003cli\u003eOptional 15mm L shaped packer brings the stand-off out to 115mm\u003c\/li\u003e\n\u003cli\u003eFree fixings included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eYou will find it at the top corners of raised concrete docks, beside dock levellers and on steel dock frames, as the photos above show. It also works as a repair where a corner has already been chipped and you want to stop the damage spreading. You can pair it with rectangular buffers lower down the dock face, which cover the main contact area while this bumper looks after the corner.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eL shaped, single moulding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSBR (styrene butadiene rubber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e450 x 450 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm width\u003c\/th\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing positions\u003c\/th\u003e\n\u003ctd\u003eThree, two in one arm and one in the other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing hole\u003c\/th\u003e\n\u003ctd\u003e28mm through hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecess\u003c\/th\u003e\n\u003ctd\u003e70mm diameter, 50mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt centres\u003c\/th\u003e\n\u003ctd\u003e250mm in each direction, 100mm in from the outer edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide taper\u003c\/th\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate or front plate\u003c\/th\u003e\n\u003ctd\u003eNone available for this bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePacker (optional)\u003c\/th\u003e\n\u003ctd\u003eL shaped SBR rubber, 450 x 450 x 15mm, 200mm arms, 3kg, three 28mm holes in the same positions as the bumper. Choose it in the Size options above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompression or load rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bumper. Order two for both top corners of a door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIs this the right dock bumper for you?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop corners of the dock are exposed or already chipped\u003c\/td\u003e\n\u003ctd\u003eThis L shaped bumper, one per corner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYour other buffers stand 115mm off the wall\u003c\/td\u003e\n\u003ctd\u003eThis bumper plus the 450 x 450 x 15mm packer, one of each per corner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou need to protect the main dock face rather than the corner\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-260-x-100mm\"\u003e750 x 250 x 100mm rubber bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixed rubber keeps tearing as the trailer rises and sinks\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm sliding bumper\u003c\/a\u003e, which also has a published compression figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBefore you order, measure the stand-off of any buffers already on the dock. A new 100mm bumper should match them, because a corner standing further out than the rest will take the first hit from every trailer. If they stand at 115mm, add the 15mm packer behind the bumper. Then check that the 450mm arms clear your dock leveller, door guides and any pipework, and that all three bolt positions land on sound structure.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eAt 14kg it can be handled without lifting gear, though a second person makes marking out quicker. Hold the bumper in place, mark the three holes, drill and bolt it back through the recesses. If you are fitting the packer, it goes between the wall and the bumper with its holes lined up, and each bolt needs to be 15mm longer. Have a competent installer confirm that the wall and fixings suit the loads at your dock, because the bumper can only pass on what the wall can take. Check the rubber and bolts as part of your routine dock inspections, and replace the bumper if it has split or come loose. A bumper protects the building and the vehicle from routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need for one loading door?\u003c\/summary\u003e\u003cp\u003eNormally two, one at each top corner of the dock. The price shown is for one bumper, so add quantity 2 for a typical door. The same part fits both sides, so there is no left or right hand version to choose.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included. Every dock is built differently, so ask your installer to check that they suit your wall before you fit the bumper. If your dock needs something different, the 28mm holes and 70mm recesses show what will fit.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I add a front plate or back plate?\u003c\/summary\u003e\u003cp\u003eNo, neither is available for this bumper. It bolts straight to the dock as a single piece. If you want a replaceable face plate, look at our sliding dock bumpers, where the parts are sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I bring it further off the wall?\u003c\/summary\u003e\u003cp\u003eYes. Choose the 450 x 450 x 15mm packer in the Size options. It is an L shaped rubber pad with the same three hole positions, fitted behind the bumper, and it takes the stand-off from 100mm to 115mm. The packer is sold on its own, so add one bumper and one packer for each corner.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill the trailer hit the bolts?\u003c\/summary\u003e\u003cp\u003eThe recesses are 50mm deep, so a correctly fitted bolt head and washer sit below the face of the rubber. Check your bolts stay inside the recess when tightened, and look at them during routine inspections as the rubber wears.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the bolt centres?\u003c\/summary\u003e\u003cp\u003eThree holes are set out on 250mm centres: two along one arm and one along the other, each 100mm in from the outer edges. The dimension drawing in the gallery shows the full layout so you can mark out before delivery.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need above. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. Fitting out several doors or a whole site? Call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will help you work out what you need.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cp\u003eGives additional protection to your loading bay, through our L-shaped Rubber Dock Bumper 450x450x100.  Made from SBR (Styrene Butadiene Rubber) which is known for its anti ageing and temperature resistance properties. Incredibly simple to install. No back plate or front plate available for this bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e450mm by 450mm by 100mm\u003c\/li\u003e\n\u003cli\u003eWeight 14kg\u003c\/li\u003e\n\u003cli\u003eFree fixings included in it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits of using rubber dock bumper 450x450x100\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDurable design\u003c\/li\u003e\n\u003cli\u003eCost-effective solution to protect your building from damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 450 x 450 x 100mm","offer_id":45580353241386,"sku":"INDSP37","price":119.41,"currency_code":"GBP","in_stock":true},{"title":"Packer - 450 x 450 x 15mm","offer_id":63244022251907,"sku":"DB-PK-L450X450X15","price":76.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/l-shaped-rubber-dock-bumper-loading-bay-corner.jpg?v=1793640767"},{"product_id":"dock-bumper-a012","title":"Small TPX Rubber Dock Bumper 330 x 305 x 100mm | 4 Recessed Fixing Holes | Steelwork \u0026 Dock Edge Protection","description":"\u003cp\u003eTight loading bays, short dock edges and exposed steelwork do not always have room for a long buffer. This small square dock bumper measures 330 x 305 x 100mm, so it fits where a 450mm or 600mm bumper will not. It is made from highly resilient TPX tyre compound and, unusually, it has four fixing holes, one near each corner. It is ideal for protecting steelwork around a loading dock, and it arrives as one moulded rubber block, with no back plate or front plate to assemble.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/small-tpx-rubber-dock-bumper-330-x-305-x-100mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the small TPX rubber dock bumper 330 x 305 x 100mm with face and side views, four hole positions and sizes\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a small four-hole bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFour fixings hold it square.\u003c\/strong\u003e Most longer bumpers fix through a line of holes. Here there is a fixing near every corner, so the block is held at all four sides of its face. That suits a short piece of wall or a steel post, where you want it to stay put under repeated knocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fixings sit below the surface.\u003c\/strong\u003e Each hole is about 38mm wide for the first 50mm, then 20mm through to the wall. The fixing head sits down inside the rubber rather than on the face a vehicle touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe tyre compound takes the contact.\u003c\/strong\u003e TPX is the highly resilient material this bumper is made from, and it gives you a cost-effective way to protect your building from damage. The rubber takes the knock in place of your steelwork or concrete, and a damaged bumper is far simpler to replace than a bent frame or a broken dock edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe shape stays out of the way.\u003c\/strong\u003e The face sits about 20mm in from the back on each side, so the block is widest against the wall and tapers towards the vehicle.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it on steel posts and frames around a loading dock, beside dock levellers, at the ends of short dock walls and at narrow goods-in doors. It also suits older bays where a larger bumper would overlap a door frame or a drain. On a busy HGV bay where trailers move up and down during loading, look at a plated bumper instead, as covered below.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne rubber dock bumper. Fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTPX tyre compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e330 x 305 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e8.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eFour, at about 235 x 178mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003eAbout 38mm wide and 50mm deep, then 20mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack or front plate\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteelwork, a post or a short piece of wall to protect\u003c\/td\u003e\n\u003ctd\u003eThis 330 x 305 x 100mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA narrower bumper with two holes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-250-x-330-x-100mm-economy-loading-bay-impact-protector\"\u003e330 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA standard dock wall with room for a longer buffer\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a003\"\u003e450 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe top corner of a dock edge\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a014\"\u003eL shaped 450 x 450 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy HGV bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure the space before you order. You need 330 x 305mm of clear, sound surface, and the 100mm stand-off sets how far a vehicle stops from the wall. If other bumpers on the same dock stand further out, this one may not be touched first.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark out from the drawing above, then offer the bumper up and check the holes against it before you drill. Fix into sound concrete or structure, and have a competent installer confirm that the wall, steelwork and anchors suit the loads at your dock. A bumper can only pass on what its fixing point can take. At 8.5kg, one person can lift it into place.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber and fixings during your routine dock inspections, and replace the bumper once it is torn or worn back towards the fixing heads. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors with a leveller use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo, because the right anchor depends on what you are fixing to. You need four fixings to suit your wall or steelwork. The holes are 20mm through, opening to about 38mm, and take an M16 washer of 37mm OD. Call us if you would like to talk through what you need before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it have a back plate or front plate?\u003c\/summary\u003e\u003cp\u003eNo. There is no back or front plate for this item. It is a single rubber block that fixes directly to your wall or steelwork through its four holes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it strong enough for HGVs?\u003c\/summary\u003e\u003cp\u003eIt is a small bumper and no load figure is published for it. It is ideal for protecting steelwork around a dock. For the main contact point on a busy HGV bay, a longer or plated bumper is usually the better match, so call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 330 x 305 x 100mm","offer_id":45580259098922,"sku":"INDSP42","price":66.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/small-rubber-dock-bumper-330-x-305-x-100mm-concrete-loading-dock.jpg?v=1793641664"},{"product_id":"dock-bumper-a006","title":"Heavy Duty SBR Rubber Dock Bumper 600 x 250 x 108mm with Free Fixings | 3 Recessed Holes | HGV Loading Bay Buffer","description":"\u003cp\u003eA trailer backing onto bare concrete chips the dock face a little more every day, until the repair bill lands on you. This solid rubber dock bumper gives the trailer something to stop against instead. It measures 600 x 250 x 108mm, weighs 15.5kg and fixes to your dock face through three recessed holes, so the bolt heads stay below the rubber the vehicle touches. Free fixings are included. There is no back plate or front plate to assemble. It is one block to lift up, mark out and bolt on, for warehouses, distribution yards and goods-in bays that want more height than a 450mm bumper gives.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-600-x-250-x-108mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the 600 x 250 x 108mm rubber dock bumper with side, end and face views and hole sizes\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMore height for the trailer to find.\u003c\/strong\u003e Trailer beds vary in height, and a trailer rises and drops as it is loaded and unloaded. Fitted upright, this bumper gives you 600mm of rubber from top to bottom, which is 150mm more contact height than a 450mm bumper on the same dock face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fixings sit below the surface.\u003c\/strong\u003e Each hole is 75mm wide for the first 50mm, then 28mm through to the wall. The bolt head and washer sit down inside the recess, with 50mm of rubber standing in front of them, rather than on the face a vehicle touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe stand-off keeps steel off your wall.\u003c\/strong\u003e The block stands 108mm proud of the dock face, so a trailer meets rubber before it reaches concrete. Check this against any other bumpers on the same dock, so they all take contact evenly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree fixings along its length.\u003c\/strong\u003e The holes run in one line down the centre, 125mm in from each end and 175mm apart, which spreads the fixings along the full height of the block.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple to replace.\u003c\/strong\u003e When the rubber has worn, undo the three fixings and fit a new block in the same holes. There are no plates to line up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA rubber made for docks.\u003c\/strong\u003e It is moulded from a blend of SBR and natural rubber, with a hardness of 70-75 Shore A (+\/- 5), good tear resistance and a service temperature of -15°C to 70°C.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it on concrete dock faces beside dock levellers, on raised loading platforms at distribution centres, at goods-in doors in factories and on brick or concrete walls that reversing vehicles keep catching. Fit one each side of a door where trailers back in square. On a bay where trailers rub up and down hard against the bumper, look at a low friction faced bumper instead, as covered below.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne rubber dock bumper, with free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSBR and natural rubber blend, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e600 x 250 x 108mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e15.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eThree, in one line along the centre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e175mm, with the end holes 125mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003e75mm wide and 50mm deep, then 28mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e108mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack or front plate\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e3,000 psi, typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTear resistance\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDimensions are typical, as moulded rubber can vary slightly.\u003c\/p\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA standard dock wall where you want more height than a 450mm bumper\u003c\/td\u003e\n\u003ctd\u003eThis 600 x 250 x 108mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLess wall space, or lighter contact from smaller vehicles\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a003\"\u003e450 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailer heights that vary widely across your fleet\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003e750 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA wider contact face in conveyor belt and steel\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-600-x-380-x-105-mm\"\u003e600 x 380 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy HGV bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe top edge of a loading ramp\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a014\"\u003eL shaped 450 x 450 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 600 x 250mm of clear, sound surface, and a position that lines up with the part of the trailer that reaches the dock first.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark out from the drawing above, then offer the bumper up and check the holes against it before you drill. At 15.5kg it is a manageable lift, but it helps to have a second person holding it while the first fixing goes in. Fix into sound concrete or structure, and have a competent installer confirm that the wall and anchors suit the loads at your dock. A bumper can only pass on what its fixing point can take.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber and fixings during your routine dock inspections, and replace the bumper once it is torn or worn back towards the fixing heads. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included. If your wall needs a particular type of anchor, call us before you order. The holes are 28mm through, opening to 75mm wide for the bolt head and washer.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it have a back plate or front plate?\u003c\/summary\u003e\u003cp\u003eNo. It is a single rubber block that fixes directly to your wall through its three holes. The back has shallow moulded recesses, which you can see in the gallery.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich way up does it fit?\u003c\/summary\u003e\u003cp\u003eIt is designed to fit upright, with the 600mm length running from top to bottom and the three holes in a vertical line. That lets trailers of differing heights dock against rubber while they are loaded or unloaded.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it strong enough for HGVs?\u003c\/summary\u003e\u003cp\u003eIt is made for loading docks where heavy goods vehicles reverse in, and no load figure is published for it. For very heavy use or hard vertical rubbing, a plated or low friction bumper is often the better match, so call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"600 x 250 x 108mm","offer_id":45580401508650,"sku":"INDSP51","price":202.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-600-x-250-x-108mm-hgv-trailer-loading-dock.jpg?v=1793699710"},{"product_id":"dock-bumper-a005","title":"L Shaped Rubber Dock Bumper 440 x 440 x 95mm with Free Fixings | 3 Recessed Holes | Dock Edge Protection","description":"\u003cp\u003eThe top edge of a loading dock is where a straight bumper leaves you exposed. This L shaped bumper gives extra protection along the top edge of the loading dock where other dock bumpers do not. One arm runs along under the edge and the other drops down the dock face, so a trailer meets rubber rather than concrete at that high point. It measures 440 x 440 x 95mm, weighs 12kg and comes with free fixings included. You can buy the bumper or a steel front plate from this page.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/l-shaped-rubber-dock-bumper-440-x-440-x-95mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the L shaped rubber dock bumper 440 x 440 x 95mm with face and side views, hole sizes and parts list\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy an L shape works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIt covers two directions from one piece.\u003c\/strong\u003e A straight bumper protects one line of the wall. Here the two 200mm wide arms cover the area along the edge and the area below it with a single moulded block, so there is no gap between two separate bumpers to go wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fixings sit below the surface.\u003c\/strong\u003e Each of the three holes is 75mm wide for the first 50mm, then 28mm through to the wall. The fixing sits down inside the rubber rather than on the face a trailer touches. One hole sits at the corner of the L and one near the end of each arm, at 250mm centres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid rubber, nothing to assemble.\u003c\/strong\u003e It is one moulded block of SBR and natural rubber, with a hardness of 70-75 Shore A (+\/- 5), good tear resistance and a service temperature of -15°C to 70°C. It is a durable, cost-effective way to protect your building, and there is no back plate to buy or fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA steel front plate can take the top edge.\u003c\/strong\u003e The optional plate has a rolled top edge to help protect the top of the bumper, and three raised round bosses, one for each hole in the bumper. It is a sensible addition where the top of the rubber is taking the wear. There are limits, covered below.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it at the top of a dock face beside a dock leveller, on older docks where trailers catch the top edge, and at goods-in doors where a straight bumper leaves the edge bare. Most bays use one each side of the leveller. Because the two arms are the same size, you can turn the bumper to suit either side.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch3\u003eDock Bumper\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne L shaped rubber dock bumper, free fixings included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e440 x 440 x 95mm, each arm 200mm wide, 240mm on the inside edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSBR and natural rubber blend, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e3,000 psi, typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTear resistance\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eThree, at 250mm centres, first hole 90mm in from the edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003e75mm wide and 50mm deep, then 28mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnd taper\u003c\/th\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate\u003c\/th\u003e\n\u003ctd\u003eThere is no compatible back plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eLeft Handed and Right Handed Front Plate\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne steel front plate, washer included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 420 x 440 x 62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel, 12mm plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArms\u003c\/th\u003e\n\u003ctd\u003e190mm along the top, 170mm wide down the leg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBosses\u003c\/th\u003e\n\u003ctd\u003eThree, 250mm centres, 60mm wide, 50mm deep, 32mm hole, to sit in the bumper's holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop edge\u003c\/th\u003e\n\u003ctd\u003eRolled, no side cheeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eNot appropriate for sites with heavy traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhich part do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe top edge of a dock needs protecting\u003c\/td\u003e\n\u003ctd\u003eDock Bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe top of an existing bumper is wearing, on a site without heavy traffic\u003c\/td\u003e\n\u003ctd\u003eLeft Handed or Right Handed Front Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou need a larger L shape\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a014\"\u003eL shaped 450 x 450 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou want an extremely tough tyre compound\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/l-shape-dock-bumper-450-x-450-x-100-mm\"\u003eL shape 450 x 450 x 100mm in TPX\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteelwork or a short piece of wall, with no edge to cover\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a012\"\u003eSmall 330 x 305 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe plates are handed. Looking at the front with the rolled edge at the top, the left handed plate has its leg on the right as drawn, and the right handed plate is the mirror image. If you are not sure which you need, send us a photo of your bumper before you order. A front plate takes a smaller M24 washer than the bumper does, and one is included with each plate option.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark out from the drawing above, then offer the bumper up and check the holes before you drill. Fix into sound concrete or structure, and have a competent installer confirm that the wall and anchors suit the loads at your dock. Set it below the top of the dock so it does not stand proud of the surface your forklifts use. At 12kg one person can lift it, but two make it easier to hold level while fixing.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber and fixings during your routine dock inspections, and replace the bumper once it is torn or worn back towards the fixings. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the front plate included with the bumper?\u003c\/summary\u003e\u003cp\u003eNo. The Dock Bumper option is the rubber bumper with free fixings included. The front plates are separate options at the top of this page, and each comes with a washer included.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use the front plate on a busy site?\u003c\/summary\u003e\u003cp\u003eIt is not appropriate for sites with heavy traffic. The plate has no strengthening side cheeks, just a rolled top edge. For a busy bay, call us and we will talk through a heavier option.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included with the rubber bumper. If your wall needs a particular type of anchor, call us before you order. Each hole is 28mm through, opening to 75mm wide for the nut and washer.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it need a back plate?\u003c\/summary\u003e\u003cp\u003eThere is no compatible back plate for this bumper. It fixes directly to the dock through its three holes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per door?\u003c\/summary\u003e\u003cp\u003eMost bays use one each side of the dock leveller, so add a quantity of 2 for a typical door. The price shown is for one.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your part at the top of the page and add the quantity you need. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through the parts with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 440 x 440 x 95mm","offer_id":45579508089130,"sku":"INDSP56","price":158.01,"currency_code":"GBP","in_stock":true},{"title":"Left Handed Front Plate - 420 x 440 x 62mm","offer_id":45579655610666,"sku":"IND_SPC50705","price":182.9,"currency_code":"GBP","in_stock":true},{"title":"Right Handed Front Plate - 420 x 440 x 62mm","offer_id":45579655643434,"sku":"IND_SPC50706","price":182.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/l-shaped-rubber-dock-bumper-440-x-440-x-95mm-loading-dock-wall.jpg?v=1793643174"},{"product_id":"dock-bumper-a003","title":"Standard Rubber Dock Bumper 450 x 250 x 100mm with Fixings | SBR Rubber | HGV Loading Bay Buffer","description":"\u003cp\u003eReversing HGVs chip a bare concrete dock a little more every week, and the trailer takes the same knock. This solid rubber dock bumper gives them something to stop against instead. It measures 450 x 250 x 100mm, weighs 11kg and bolts to your dock face through two recessed holes, with the fixings included in the price. It is our best-selling dock bumper, and most orders are for two or more, because most doors take one on each side. If you run a warehouse, distribution yard or goods-in bay and want a straightforward bumper that goes straight on the wall, start here.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-450-x-250-x-100mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the 450 x 250 x 100mm rubber dock bumper with side, end and face views, hole sizes and packer stand-off\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFixings in the price.\u003c\/strong\u003e Many suppliers sell the bolts and washers separately. Here they come with the bumper, so you do not need to source anchors before the job can start. If your wall needs a particular type of fixing, call us before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe bolts sit below the surface.\u003c\/strong\u003e Each hole is 75mm wide for the first 50mm, then 28mm through to the wall. The bolt head and washer sit down inside the recess, with rubber standing in front of them, rather than on the face a trailer touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo fixings, simple to mark out.\u003c\/strong\u003e The holes run in one line, 250mm apart and 100mm in from each end. There are no plates to assemble, so it is one block to lift up, mark out and bolt on. When it has worn, undo two fixings and fit a new one in the same holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStand-off you can adjust.\u003c\/strong\u003e On its own the block stands 100mm off the wall. Rubber packers behind it bring that out to 110, 115, 120 or 150mm, so you can line it up with other bumpers on the dock while the rubber can still compress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoom to upgrade.\u003c\/strong\u003e Add the galvanised front plate and the steel takes the rubbing while the bumper behind it compresses to absorb the impact, which can greatly extend its life on a busy door.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTested in a laboratory.\u003c\/strong\u003e In an independent compression test, this bumper took 6.3kN at about 20mm of compression, under a 100 x 51mm loading plate. Treat that as a comparison figure rather than a load rating. If your specification needs a rating, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it on concrete dock faces beside dock levellers, on raised loading platforms at distribution centres, at goods-in doors in factories and on walls that reversing vehicles keep catching. Fit one each side of a door where trailers back in square. Orders of four or more are common.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne rubber dock bumper, with fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSBR and natural rubber blend, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e450 x 250 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e11kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, in one line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e250mm, with each hole 100mm in from the end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003e75mm wide and 50mm deep, then 28mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack or front plate\u003c\/th\u003e\n\u003ctd\u003eNot needed. Both available as options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e3,000 psi, typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTear resistance\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompression test\u003c\/th\u003e\n\u003ctd\u003e6.3kN at about 20mm, 100 x 51mm loading plate. Comparison figure only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDimensions are typical, as moulded rubber can vary slightly.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-packer-stand-off-chart.png?width=1200\" alt=\"Chart showing the bumper standing 100mm off the wall alone, and 110, 115, 120 or 150mm with a 10, 15, 20 or 50mm rubber packer\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eParts that fit this bumper\u003c\/h2\u003e\n\u003cp\u003eChoose these from the Size menu at the top of the page. You can order them with a bumper, or on their own to adjust or repair a bumper you already have.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e10mm rubber packer\u003c\/td\u003e\n\u003ctd\u003e450 x 250 x 10mm\u003c\/td\u003e\n\u003ctd\u003e1.3kg\u003c\/td\u003e\n\u003ctd\u003eFine adjustment without losing compression. Perforated, with holes on the bumper's 250mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15mm rubber packer\u003c\/td\u003e\n\u003ctd\u003e450 x 250 x 15mm\u003c\/td\u003e\n\u003ctd\u003e2.3kg\u003c\/td\u003e\n\u003ctd\u003eMore projection. Available plain or pre-drilled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20mm rubber packer\u003c\/td\u003e\n\u003ctd\u003e450 x 250 x 20mm\u003c\/td\u003e\n\u003ctd\u003e2.8kg\u003c\/td\u003e\n\u003ctd\u003eMore projection again. Available plain or pre-drilled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50mm rubber packer\u003c\/td\u003e\n\u003ctd\u003e440 x 245 x 50mm\u003c\/td\u003e\n\u003ctd\u003e6kg\u003c\/td\u003e\n\u003ctd\u003eThe thickest option. Two holes on 250mm centres, 42mm recess 25mm deep, then 25mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanised front plate\u003c\/td\u003e\n\u003ctd\u003e460 x 255 x 65mm\u003c\/td\u003e\n\u003ctd\u003e16.5kg\u003c\/td\u003e\n\u003ctd\u003e12mm steel with side cheeks, much stronger than a flat plate. The bumper behind compresses to absorb the impact. Takes a smaller M24 washer, so tell us if you fit one\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring back plate\u003c\/td\u003e\n\u003ctd\u003e720 x 250 x 66mm\u003c\/td\u003e\n\u003ctd\u003e35.5kg\u003c\/td\u003e\n\u003ctd\u003eLets the bumper slide down as the trailer is loaded, then return when it moves away. Comes with fixings for this bumper. Other fixings are needed to attach it to the bay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWant a plain flat plate instead of a spring one? The \u003ca href=\"\/products\/heavy-duty-dock-bumper-back-plate-2\"\u003e460 x 255 x 15mm back plate\u003c\/a\u003e is sold separately, with two M24 threaded holes to take this bumper. Bumpers and studs fixed to a back plate are easier and quicker to replace than those fixed straight into concrete.\u003c\/p\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA standard dock wall and trailers that back in square\u003c\/td\u003e\n\u003ctd\u003eThis 450 x 250 x 100mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou want more height for the trailer to find\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a006\"\u003e600 x 250 x 108mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailer heights that vary widely across your fleet\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003e750 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou need more stand-off from the wall\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-extended-rubber-dock-bumper\"\u003e448 x 248 x 153mm extended bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy HGV bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm sliding bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe top edge of a loading ramp\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a014\"\u003eL shaped 450 x 450 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 450 x 250mm of clear, sound surface, in a position that lines up with the part of the trailer that reaches the dock first.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark out from the drawing above, then offer the bumper up and check the holes before you drill. On sound concrete, a bumper this size is normally fixed with two M20 x 200-220mm through anchor studs and heavy washers. Allow longer fixings if you fit a thick packer behind it. Have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what its fixing point can take.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber and fixings during routine dock inspections, and replace the bumper once it is torn or worn back towards the bolt heads. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors use one each side, so set the quantity to 2 for each door you are protecting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, fixings are included with the bumper. If your wall needs a particular type of anchor, call us before you order. The holes are 28mm through, opening to 75mm wide for the bolt head and washer.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need a back plate or front plate?\u003c\/summary\u003e\u003cp\u003eNo. The bumper fixes directly to a sound wall through its two holes. A front plate adds service life on a busy door, and a back plate makes later replacement quicker. Both are optional.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich way up does it fit?\u003c\/summary\u003e\u003cp\u003eIt is normally fitted upright, with the 450mm length running from top to bottom and the two holes in a vertical line. That gives trailers at different heights the most rubber to meet.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I buy just the packers or plates?\u003c\/summary\u003e\u003cp\u003eYes. Pick the part you need from the Size menu. Check the size against your existing bumper first, or call us if you are not sure it will fit.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it strong enough for HGVs?\u003c\/summary\u003e\u003cp\u003eIt is made for loading docks where heavy goods vehicles reverse in, and no load rating is published for it, though the lab figure above gives you a comparison. For very heavy use or hard vertical rubbing, a plated or low friction bumper is often the better match, so call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your bumper or part from the Size menu and add the quantity you need. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 450 x 250 x 100mm","offer_id":45578404921642,"sku":"INDSP64","price":117.05,"currency_code":"GBP","in_stock":true},{"title":"Packer - 450 x 250 x 10mm","offer_id":45578552344874,"sku":"IND_SPC50699","price":17.9,"currency_code":"GBP","in_stock":true},{"title":"Packer - 450 x 250 x 15mm","offer_id":45578552377642,"sku":"IND_SPC50700","price":34.9,"currency_code":"GBP","in_stock":true},{"title":"Packer - 450 x 250 x 20mm","offer_id":45578552410410,"sku":"IND_SPC50701","price":46.9,"currency_code":"GBP","in_stock":true},{"title":"Packer - 440 x 245 x 50mm","offer_id":45578552443178,"sku":"IND_SPC50702","price":50.9,"currency_code":"GBP","in_stock":true},{"title":"Front Plate - 460 x 255 x 65mm","offer_id":45580726534442,"sku":"IND_SPC50703","price":184.9,"currency_code":"GBP","in_stock":true},{"title":"Spring Back Plate - 720 x 250 x 66mm","offer_id":45580636127530,"sku":"IND_SPC50704","price":470.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-450-x-250-x-100mm-hgv-trailer-loading-dock.jpg?v=1793704762"},{"product_id":"shallow-dock-bumper-465-x-270-x-66mm","title":"Shallow Dock Bumper 465 x 270 x 66mm with Free Fixings | Replaceable Rubber Face, Galvanised Steel Back Plate | HGV Loading Bay","description":"\u003cp\u003eOn a loading bay, every millimetre between the trailer bed and the dock is a gap your dock leveller, forklift or pump truck has to cross. This shallow dock bumper stands only 66mm off the wall, so the trailer stops close to the dock and still meets rubber rather than concrete. It measures 465 x 270 x 66mm and weighs 21kg, with a black rubber face held in a galvanised steel back plate, and it comes with free fixings. When the rubber wears out you change the front plate, not the whole bumper. It suits goods-in bays, distribution yards and factory docks where a deeper bumper leaves too wide a gap.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/shallow-dock-bumper-465-x-270-x-66mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the 465 x 270 x 66mm shallow dock bumper with back plate hole pattern, end view and parts list\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA trailer can back in close.\u003c\/strong\u003e At 66mm, this is a shallow bumper. A 110mm bumper holds the same trailer 44mm further from the dock, and that extra distance is what the leveller lip has to span on every delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe rubber is the part that wears.\u003c\/strong\u003e The front plate is sacrificial. It is a black wear-resistant rubber that is tough, performs well under compression and will withstand continuous use, and it can be taken out and replaced if it gets damaged. You buy a new plate instead of a new assembly, so there is no need to drill the wall again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fixings are out of harm's way.\u003c\/strong\u003e The four countersunk holes are in the back plate, behind the rubber. Once the front plate is in, the fixing heads are covered, and a trailer has no way of catching them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe steel stays on the wall.\u003c\/strong\u003e The back plate is galvanised steel, with a return down each long side that holds the front plate in place. It stays bolted to the dock while the rubber is changed, which is why the same anchors can serve more than one front plate. It takes this rubber front plate or a low friction UHMWPE one, so you can change the face later without touching the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlenty of height for its size.\u003c\/strong\u003e Fitted upright, it gives 465mm of contact height in a 270mm width, which leaves room beside a dock leveller or door frame.\u003c\/p\u003e\n\u003cp\u003eA shallow bumper has less rubber to absorb a hard hit than a deeper one, and no compression or load figure is published for this line. If your drivers come in hard or your specification needs a figure, call us before you order.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/shallow-dock-bumper-replaceable-rubber-front-plate-diagram.png?width=1200\" alt=\"Diagram of the dock bumper end section: replaceable rubber front plate held by the returns of a galvanised steel back plate, with the anchor heads behind the rubber\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eFit it on concrete dock faces either side of a dock leveller, on raised platforms at distribution centres and at goods-in doors in factories and warehouses. It suits bays where the gap between trailer and dock matters. Where trailers rise and fall hard against the bumper as they load, a low friction face is often the better match, as covered below.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete bumper\u003c\/th\u003e\n\u003ctd\u003e465 x 270 x 66mm, 21kg, with free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber front plate\u003c\/th\u003e\n\u003ctd\u003e450 x 245 x 50mm, 224mm face, 7kg, also sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSteel back plate\u003c\/th\u003e\n\u003ctd\u003e460 x 270 x 35mm, 14kg, also sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eBlack SBR and natural rubber blend in a galvanised steel back plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e66mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber hardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e3,000 psi, typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTear resistance\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eFour in the back plate, 16mm through, countersunk to 30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e350 x 145mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings for the back plate\u003c\/th\u003e\n\u003ctd\u003eFour M10 x 106mm countersunk anchor bolts, 16mm drill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, because rubber shrinks by a variable amount as it is made. If you are fitting a new part to an existing bumper, measure the one you have first, or call us.\u003c\/p\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou want trailers close to the dock, with a rubber face you can replace\u003c\/td\u003e\n\u003ctd\u003eThis bumper, Dock Bumper option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe rubber on your existing bumper is worn or torn\u003c\/td\u003e\n\u003ctd\u003eThis listing, Front Plate option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe steel plate is damaged, but the rubber is sound\u003c\/td\u003e\n\u003ctd\u003eThis listing, Back Plate option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers rub up and down on your existing back plate\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-dock-bumper-front-plate-1\"\u003e450 x 250 x 50mm UHMWPE front plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same 66mm depth, where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/galvanized-steel-dock-bumper-470-x-270-x-66mm\"\u003e470 x 270 x 66mm bumper with a UHMWPE face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore stand-off, with a face that slides as the trailer moves\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm sliding bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore contact height from one solid rubber block\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a006\"\u003e600 x 250 x 108mm rubber bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe top edge of a loading ramp\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a014\"\u003eL shaped 450 x 450 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 465 x 270mm of clear, sound surface, positioned where the trailer reaches the dock first.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark out from the drawing above, then offer the back plate up and check the holes against your marks before you drill. The back plate fixes with four M10 x 106mm countersunk anchor bolts in 16mm drilled holes. Fix into sound concrete or structure, and have a competent installer confirm that the wall and anchors suit the loads at your dock. At 21kg complete, it is easier to hang the back plate first and then fit the rubber.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber and fixings during your routine dock inspections. Replace the front plate when it is torn or worn back towards the steel returns. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included with the complete bumper. If your wall needs a particular type of anchor, or you are buying a back plate on its own, call us before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I replace just the rubber?\u003c\/summary\u003e\u003cp\u003eYes. Choose the Front Plate option. It fits the back plate in place of the worn rubber, so the back plate and its anchors can stay on the wall.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat else does this front plate fit?\u003c\/summary\u003e\u003cp\u003eThe rubber front plate also fits our \u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm\u003c\/a\u003e and \u003ca href=\"\/products\/heavy-duty-dock-bumper-465-x-280-x-160-mm\"\u003e465 x 280 x 160mm\u003c\/a\u003e bumpers. If you are not sure what you have, measure it or call us.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich way up does it fit?\u003c\/summary\u003e\u003cp\u003eIt is normally fitted upright, with the 465mm length running from top to bottom. That gives trailers at different heights the most rubber to meet.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it strong enough for HGVs?\u003c\/summary\u003e\u003cp\u003eIt is made for loading docks where heavy goods vehicles reverse in, and no load figure is published for it. For very hard contact, a deeper bumper gives more rubber to absorb the hit, so call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your option and quantity at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 465 x 270 x 66mm","offer_id":45580525535530,"sku":"INDSP68","price":298.9,"currency_code":"GBP","in_stock":true},{"title":"Front Plate - 450 x 245 x 50mm","offer_id":45580525568298,"sku":"INDSP69","price":74.9,"currency_code":"GBP","in_stock":true},{"title":"Back Plate - 460 x 270 x 35mm","offer_id":45580615024938,"sku":"IND_SPC50698","price":165.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/shallow-dock-bumper-465-x-270-x-66mm-hgv-trailer-loading-dock.jpg?v=1793701635"},{"product_id":"heavy-duty-hgv-truck-wheel-stop","title":"Heavy Duty HGV Truck Wheel Stop 1000 x 300 x 150mm | Recycled Rubber | Fixings Included","description":"\u003cp\u003e\u003cstrong\u003eReversing trailers don't stop themselves.\u003c\/strong\u003e Without a physical limit, a driver judging the back of the bay in a mirror can roll into a wall, a fence, a walkway or the vehicle parked behind. This 1000 x 300 x 150mm rubber wheel stop gives the tyre something solid to meet, so the trailer stops where you want it. It weighs 25kg, is made from 95% recycled tyres, and bolts straight down into concrete or tarmac with the five M16 galvanised anchors supplied. If you run a yard, freight depot or distribution centre, this is the size built for HGVs. The price shown is for one wheel stop, and each bay needs two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/hgv-wheel-stop-1000-x-300-x-150mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the 1000 x 300 x 150mm HGV wheel stop with end section, plan view and key specifications\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel stop works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA steep face to stop the wheel.\u003c\/strong\u003e The short, steep side faces the tyre. At 150mm high and a full metre long, it gives a rear wheel a clear point to come up against, and the driver feels it straight away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA long slope for when it goes wrong.\u003c\/strong\u003e The other side is a long, shallow slope. If a trailer does ride over the top, the driver can drive back over it instead of leaving the wheels trapped behind a block and the vehicle stranded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRubber that keeps its shape.\u003c\/strong\u003e Made from 95% recycled tyres, it won't bend or deform from vehicle movements. There is no steel in the body to rust, and it copes with concrete and tarmac yards, indoors or out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to see.\u003c\/strong\u003e A 50mm yellow glass bead reflective strip runs the length of the ridge, moulded into the kerb rather than glued on. It stands out against the black rubber, including in low light when drivers need it most.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeld down at five points.\u003c\/strong\u003e Five recessed fixing points take the M16 galvanised anchors, so the stop stays put under repeated contact.\u003c\/p\u003e\n\u003cp\u003eNo load rating is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it at indoor and outdoor loading bays, freight depots, logistics hubs, distribution centres, commercial truck parks, ports and freight terminals. It also suits coach parks and any bay where the tail of a vehicle ends up close to a building, perimeter fence, pedestrian route or another row of parked trailers.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel stop with 5 fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e25kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e95% recycled tyres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack with yellow reflective strip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVisibility\u003c\/th\u003e\n\u003ctd\u003e50mm yellow glass bead strip, moulded in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings included\u003c\/th\u003e\n\u003ctd\u003e5 M16 galvanised anchors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrill size\u003c\/th\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eConcrete or tarmac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor and outdoor bays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity per bay\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDimensions are typical, as moulded rubber can vary slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to plan your bays\u003c\/h2\u003e\n\u003cp\u003eEach bay takes two wheel stops in one straight line, one for each side of the trailer. On a typical 2800mm or 3000mm bay, that means a gap of about 600mm between them. Allow about 1500mm behind the stops for the tail of the vehicle to overhang, so it stops short of whatever you are protecting, and keep about 400mm between one bay's stop and the next for driver access.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/hgv-wheel-stop-bay-layout-plan.jpg?width=1200\" alt=\"Plan of one HGV parking bay showing two wheel stops 600mm apart, about 1500mm tail overhang and about 400mm driver access\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003cp\u003eEach bay's two stops weigh 50kg in total, which helps when you plan unloading on site.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBays\u003c\/th\u003e\n\u003cth\u003eStops\u003c\/th\u003e\n\u003cth\u003eAnchors\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIs this the right product?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHGVs, lorries or trailers reversing into marked bays\u003c\/td\u003e\n\u003ctd\u003eThis 1000 x 300 x 150mm wheel stop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolding a parked vehicle during loading, moved by hand each time\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/wheel-chock-a140\"\u003eSolid rubber wheel chock\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCars and light vehicles in a standard parking bay\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-rubber-kerb-stopper\"\u003e900 x 150 x 95mm rubber kerb stopper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne continuous steel stop across a wide bay\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-durable-kerb-stopper\"\u003e2500mm steel kerb stopper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering trailers square into a dock door\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-wheel-guide-3000-x-600-mm\"\u003e3000mm steel wheel guide\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailer legs sinking into tarmac\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-trailer-plate-1000-x-1000-mm\"\u003e1000 x 1000mm trailer plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eSet the stop in position with the short steep face towards the wheel and the long slope away from it. Use the stop itself as a guide to mark the five holes, move it aside, and drill with a 16mm bit. Line it back up over the holes and fit the anchors. It is ready to use straight away.\u003c\/p\u003e\n\u003cp\u003eEach stop weighs 25kg, so lift it with care. Have a competent installer check that the surface is sound, especially on older or thin tarmac. Check the anchors during routine yard inspections and retighten any that have worked loose. A wheel stop guides parking position. It does not replace wheel chocks, a banksman or your site's traffic plan, and it is not suitable for use as a speed bump.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel stop or a pair?\u003c\/summary\u003e\u003cp\u003eThe price is for one wheel stop. Each bay uses two, one for each side of the trailer, so set the quantity to 2 for every bay you are fitting out.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Each wheel stop comes with five M16 galvanised anchors for concrete or tarmac. You will need a hammer drill and a 16mm masonry bit to fit them.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich way round does it go?\u003c\/summary\u003e\u003cp\u003eThe short steep face goes towards the wheel, and the long shallow slope faces away from it. That way the tyre meets the steep side first, and a trailer that rides over can still drive back across the slope.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan a trailer get stuck behind it?\u003c\/summary\u003e\u003cp\u003eThe long rear slope is there to prevent that. If a wheel does ride over the top, the driver can pull forward back over the slope, rather than being trapped behind a steep block.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it as a speed bump?\u003c\/summary\u003e\u003cp\u003eNo. It is designed to mark the stopping point in a parking bay, not for vehicles to drive over at speed. It should be bolted across the wheel path at the end of the bay only.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number of wheel stops you need and check out online, with Express UK Delivery to your site. For a whole yard or a large number of bays, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"1000mm(L) x 300mm(D) x 150mm(H)","offer_id":43833376702762,"sku":"INDSP107","price":219.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/hgv-wheel-stop-1000-x-300-x-150mm-rubber-lorry-yard.jpg?v=1793827618"},{"product_id":"dock-bumper","title":"Steel Dock Bumper 620 x 360 x 140mm with Free Fixings | Hooded Front Plate, Conveyor Belt Core, Over-Dock Flange | HGV Loading Bay","description":"\u003cp\u003e\u003cstrong\u003eWhere trailers grind against a rubber bumper and tear it up, this one gives them a steel plate to meet instead.\u003c\/strong\u003e The steel front plate sits over a laminated conveyor belt core, and it is fixed at the rear with elongated holes, so the plate can move back and the rubber can compress under pressure. It is extremely tough, and a hooded top and a flange over the dock edge make it a job for hard-worked bays. It suits warehouse managers, site maintenance teams and loading bay installers looking after docks that destroy ordinary bumpers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e620 x 360 x 140mm, and 670mm tall with the hood\u003c\/li\u003e\n\u003cli\u003eFree fixings included: eight M16 through-anchor studs and eight washers\u003c\/li\u003e\n\u003cli\u003eWeight 65kg\u003c\/li\u003e\n\u003cli\u003e250mm wide steel front plate over a conveyor belt core\u003c\/li\u003e\n\u003cli\u003e200mm flange that sits on top of the dock\u003c\/li\u003e\n\u003cli\u003eEight fixing holes: six in the back plate, two in the flange\u003c\/li\u003e\n\u003cli\u003eSold singly, and most doors use two\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/steel-dock-bumper-620-x-360-x-140mm-drawing-flange-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the steel dock bumper 620 x 360 x 140mm with face view, six fixing holes at 260mm spacing, side view with hood and 200mm flange, 280mm wide top flange with two holes, a photo of the bumper and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003ch3\u003eSteel takes the contact, rubber takes the force\u003c\/h3\u003e\n\u003cp\u003eOn a plain rubber bumper, the vehicle wears the same material that absorbs the force. Here the two jobs are separated. The steel plate meets the trailer, and the laminated conveyor belt behind it does the absorbing. Think of it as a laminated bumper with a steel front added.\u003c\/p\u003e\n\u003ch3\u003eThe front plate is free to move\u003c\/h3\u003e\n\u003cp\u003eThe plate is held at the rear through elongated holes, not fixed solid. When a trailer pushes on it, the plate moves back and the rubber compresses. Four bolts each side hold the assembly together, and you can see them clearly in the photos.\u003c\/p\u003e\n\u003ch3\u003eA hood and a flange at the top\u003c\/h3\u003e\n\u003cp\u003eThe top of the front plate angles back to form a hood, standing 50mm above the back plate. A 200mm steel flange runs back from the top of the back plate and sits on the dock surface, with two more fixing holes. So this bumper is held on top of the dock as well as on its face.\u003c\/p\u003e\n\u003ch3\u003eLoad figures\u003c\/h3\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eThis bumper goes on the dock face either side of a dock leveller or door opening, with its flange on top of the dock, at distribution centres, manufacturing plants and goods-in bays. Choose it where trailers rub up and down hard enough to tear rubber, or where a softer bumper keeps needing replacing. It needs a dock edge you can fix to from the top as well as the face, so check there is nothing in the way of the 200mm flange.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne complete bumper: front plate, conveyor belt core, back plate and flange, plus free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e620 x 360 x 140mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e670mm including the hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall depth\u003c\/th\u003e\n\u003ctd\u003e340mm: 140mm from the wall plus the 200mm flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e65kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel and conveyor belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront plate\u003c\/th\u003e\n\u003ctd\u003eSteel, 250mm wide, hooded at the top, fixed at the rear with elongated holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate\u003c\/th\u003e\n\u003ctd\u003eSteel, 360 x 620mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHoles in the back plate\u003c\/th\u003e\n\u003ctd\u003eSix: top pair 20mm, the other four 19mm, 260mm apart down each side, about 300mm between the two rows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop flange\u003c\/th\u003e\n\u003ctd\u003e280mm wide, 200mm deep, with two 20mm holes about 180mm apart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e140mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: 8 M16 through-anchor studs, 125 to 140mm long, and 8 washers (50mm OD, 16mm ID, 3mm thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIND_SPC50697\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs This the Right Bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers that tear rubber, with a dock edge you can fix to from the top\u003c\/td\u003e\n\u003ctd\u003eThis 620 x 360 x 140mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same idea in a longer body\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/steel-conveyor-belt-dock-bumper-730-x-280-x-140mm\"\u003e730 x 280 x 140mm bumper with a steel hood\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA low friction yellow face that slides with the trailer\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm sliding bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlain conveyor belt, no steel front\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-laminated-rubber-conveyor-900-x-400-x-95-mm\"\u003e900 x 400 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 360 x 620mm of clear, sound wall, plus room for the flange on top of the dock. A 140mm stand-off also sets the gap between trailer and leveller, so check your leveller lip still reaches the trailer bed. You can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eAt 65kg this is a job for two people with a lifting aid. Sit the flange on top of the dock and mark through the holes, because the hole spacings across the back plate and flange are approximate. The free M16 through-anchor studs and washers are for fixing into sound concrete, and the washers cover the 19 to 20mm holes. Have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what its fixing point can take.\u003c\/p\u003e\n\u003cp\u003eCheck the plate, bolts and fixings during routine bay inspections. This bumper protects against routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or safe docking procedures.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per door?\u003c\/summary\u003e\u003cp\u003eMost bays use two, one either side of the leveller or door opening. The price shown is for one bumper, so add two to your basket for a standard door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with each bumper: eight M16 through-anchor studs, 125 to 140mm long, and eight washers (50mm OD, 16mm ID, 3mm thick), for fitting into sound concrete. That is one for each of the six holes in the back plate and the two in the flange.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it solid steel?\u003c\/summary\u003e\u003cp\u003eNo. The front, back plate and flange are steel, and the core is laminated conveyor belt, which is what absorbs the force. That is why the front plate is fixed with elongated holes: it has to be able to move back as the rubber compresses.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy is it described as 620mm if it is 670mm tall?\u003c\/summary\u003e\u003cp\u003eThe 620mm is the back plate that fixes to the wall. The hood on the front plate rises another 50mm above it, so allow for 670mm overall.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the flange have to go on top of the dock?\u003c\/summary\u003e\u003cp\u003eIt is built to. The flange sits on the dock surface and has two of the eight fixing holes. If your dock edge has a leveller frame or anything else in that spot, call us before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. Plan for a 65kg item when receiving each unit. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 620 x 360 x 140mm","offer_id":45580537200938,"sku":"IND_SPC50697","price":849.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/steel-dock-bumper-620-x-360-x-140mm-concrete-loading-dock.jpg?v=1793829497"},{"product_id":"steel-conveyor-belt-dock-bumper-730-x-280-x-140mm","title":"Steel \u0026 Conveyor Belt Dock Bumper | 730 x 280 x 140mm | Galvanised Steel Hood, 67kg","description":"\u003cp\u003e\u003cstrong\u003eIf trailers ride up over your existing buffers, or plain rubber ones keep tearing, this is the step up.\u003c\/strong\u003e It is an extremely tough 67kg dock bumper for busy loading bays: a galvanised steel hood bolted over a recycled conveyor belt core, on a back plate that fixes to the dock face and a gusset that sits on top of the dock. The hood rises about 280mm above dock level, so a high trailer still meets steel instead of climbing over the top. It suits supermarket depots, distribution centres, cold stores and any bay that sees repeated HGV contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e730 x 280 x 140mm, and 790mm tall overall with the hood\u003c\/li\u003e\n\u003cli\u003eWeight 67kg, so plan the lift before it arrives\u003c\/li\u003e\n\u003cli\u003eGalvanised steel for outdoor bays\u003c\/li\u003e\n\u003cli\u003eFour fixing holes: two in the back plate, two in the foot plate\u003c\/li\u003e\n\u003cli\u003eSold singly, and most bays need two\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/steel-conveyor-dock-bumper-730-x-280-x-140mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the steel and conveyor belt dock bumper 730 x 280 x 140mm with face view, side view with hood and gusset, foot plate with two holes and a photo of the bumper\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy This Bumper Works\u003c\/h2\u003e\n\u003ch3\u003eThe trailer hits steel, not rubber\u003c\/h3\u003e\n\u003cp\u003eA plain rubber bumper takes every contact on its own face. As a trailer rises and falls during loading, that face gets scraped and torn. Here the wide steel hood takes the contact and the rubber sits protected behind it, away from the abrasion that wears out an exposed buffer.\u003c\/p\u003e\n\u003ch3\u003eThe core still gives under load\u003c\/h3\u003e\n\u003cp\u003eSteel alone would pass the shock straight into your dock. The hood is fixed at the rear through elongated holes, so it can travel under pressure and compress the conveyor belt behind it. That movement absorbs and dissipates the energy of a reversing vehicle and reduces the stress reaching the dock structure and the trailer. The steel chassis stops the bumper being compressed flat under extreme repeated impact, and the construction is designed for millions of compression cycles without cracking or permanent deformation.\u003c\/p\u003e\n\u003ch3\u003eThe hood is there for high trailers\u003c\/h3\u003e\n\u003cp\u003eThe top of the hood angles back towards the dock and rises above it. Standard low bumpers stop at or below dock height, so an air-suspended trailer riding high can pass over them. This one gives it a steel face to meet at that height.\u003c\/p\u003e\n\u003ch3\u003eThe load goes into the top of the dock too\u003c\/h3\u003e\n\u003cp\u003eA triangular gusset and foot plate reach 200mm back over the dock, so the bumper is held at the top as well as on the face. Most flat buffers rely on face fixings alone.\u003c\/p\u003e\n\u003ch3\u003eBuilt for the busiest doors\u003c\/h3\u003e\n\u003cp\u003eThis is the strongest and most durable dock bumper in our range, for the highest-volume docks where standard rubber bumpers wear out too quickly. The rubber is unaffected by the rain, frost, UV and temperature extremes common on UK docks. Bolt it in place and it needs little maintenance beyond routine checks.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eYou will find this type of bumper on the busiest doors: warehouse and distribution centre docks, supermarket, retail and cold storage bays, parcel hubs, food processing and manufacturing sites with their own fleet, and agricultural buildings and farm stores. It is also a sensible choice where trailers vary in height through the day, or on bays where smaller rubber bumpers have been replaced more than once.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize (height x width x projection)\u003c\/th\u003e\n\u003ctd\u003e730 x 280 x 140mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height with hood\u003c\/th\u003e\n\u003ctd\u003e790mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall depth including gusset\u003c\/th\u003e\n\u003ctd\u003e340mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHood width\u003c\/th\u003e\n\u003ctd\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate width\u003c\/th\u003e\n\u003ctd\u003e280mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight above dock top\u003c\/th\u003e\n\u003ctd\u003eAbout 280mm, measured from the foot plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall needed below dock top\u003c\/th\u003e\n\u003ctd\u003eAbout 510mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGusset reach over the dock\u003c\/th\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate fixing holes\u003c\/th\u003e\n\u003ctd\u003e2 x 20mm, 180mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFoot plate\u003c\/th\u003e\n\u003ctd\u003e255mm wide, with 2 x 21mm holes about 175mm apart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamping bolts\u003c\/th\u003e\n\u003ctd\u003eFour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel with a recycled conveyor belt core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eGalvanised silver, with a black core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e67kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eSingle bumper. Most bays need two\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompression figures and impact rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIND_SPC50693\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eDimensions are indicative. Please check them against your dock before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Bumper\u003c\/h2\u003e\n\u003cp\u003eStart with three checks. Is there at least 510mm of sound wall below the dock top? Is there 200mm of clear, solid dock top behind the face for the foot plate? Does the door, seal or leveller clear a hood rising about 280mm above the dock? If the answer to any of these is no, one of these may suit you better:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/dock-bumper\"\u003e620 x 360 x 140mm steel front plate bumper\u003c\/a\u003e: wider and shorter, 65kg, with free fixings.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/heavy-duty-dock-bumper-3\"\u003e960 x 590 x 200mm steel and rubber bumper\u003c\/a\u003e: for trailers that overrun the dock by a considerable height, 85kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm sliding bumper\u003c\/a\u003e: a low friction face that slides in a steel cradle as the trailer moves.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/dock-laminated-rubber-conveyor-900-x-400-x-95-mm\"\u003e900 x 400 x 105mm laminated bumper\u003c\/a\u003e: conveyor belt construction without the steel hood, for a wide contact area.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm low friction bumper\u003c\/a\u003e: a lighter option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eAt 67kg this is a mechanical lift or a two-person job, so plan for it. Mount in pairs, one each side of the dock opening, with the foot plate flat on the dock top and the back plate flat against the dock face, which puts it around trailer bed height (approx. 1200 to 1300mm from the ground for standard UK trailers). Sit it in place and mark through the holes before you drill, because the foot plate hole spacing is approximate. The 20mm and 21mm holes take M16 or M20 through-bolts, into concrete or a steel dock structure. Fixings are not part of this listing, so choose anchors to suit your dock and have them checked if the concrete is old or cracked.\u003c\/p\u003e\n\u003cp\u003eInspect every 6 months on high-traffic docks of 20 or more movements a day. Check the bolts and the hood, and replace the bumper if the core has perished or the steel has distorted.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need one or two?\u003c\/summary\u003e\u003cp\u003eMost bays use two, one each side of the opening, so the trailer meets both evenly. The price shown is for one bumper. Ask us if you are fitting out several doors.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it work on a dock with a leveller?\u003c\/summary\u003e\u003cp\u003eYes, if there is room each side. Allow for the 280mm back plate width beside the leveller frame, and check the 200mm gusset reach does not foul the leveller or door track.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go outside?\u003c\/summary\u003e\u003cp\u003eYes. The steel is galvanised for corrosion resistance and the bumper is made for outdoor loading bays.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the fixings included?\u003c\/summary\u003e\u003cp\u003eThey are not part of this listing. You need four, for the 20mm and 21mm holes. Call us on 01744 520110 if you want help choosing them.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the 140mm figure?\u003c\/summary\u003e\u003cp\u003eThat is how far the bumper stands out from the dock face, measured to the front of the hood. Trailers stop this far short of the dock, so check it against your leveller lip.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eThis bumper is in UK stock. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. Because of the weight, make sure someone is on site with suitable lifting equipment. For several doors or bulk quantities, contact our team on 01744 520110 or sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 730 x 280 x 140mm","offer_id":45580530745642,"sku":"IND_SPC50693","price":759.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/steel-conveyor-belt-dock-bumper-730-x-280-x-140mm-dock-leveller.jpg?v=1793694984"},{"product_id":"dock-bumper-600-x-300-x-80mm","title":"Low Profile SBR Rubber Dock Bumper 600 x 300 x 80mm with Free Fixings | Moulded One Piece, 4 Recessed Holes | HGV Loading Bay Buffer","description":"\u003cp\u003eA dock leveller with a fixed length lip only reaches so far. Every millimetre your bumpers hold the trailer away from the wall is a millimetre less lip resting in the trailer. This moulded SBR rubber dock bumper stands only 80mm off the wall, so more of that lip reaches the trailer bed, while a 600 x 300mm block of solid rubber still protects your dock wall, your leveller and the vehicle's bodywork. Fit one each side of the door, and the bolts sit down in deep recesses where the trailer cannot reach them. The free fixings are in the price.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/low-profile-dock-bumper-600-x-300-x-80mm-drawing-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the low profile SBR rubber dock bumper 600 x 300 x 80mm with hole centres of 450 x 150mm, a side view of the stepped fixing holes and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy an 80mm moulded bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMore lip in the trailer.\u003c\/strong\u003e At 80mm deep, this bumper keeps the stand-off short. That helps where the leveller has a fixed length lip, or where deeper bumpers leave the lip only just resting on the trailer bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolts sit below the face.\u003c\/strong\u003e Each of the four fixing holes steps down from a 55mm recess, 38mm deep, to a 21mm hole through the rubber. A bolt and washer sit in the bottom of the recess, so the trailer meets rubber and not steel. Two shallower recesses, one at each end, have no hole through them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid rubber with nothing to rust.\u003c\/strong\u003e It is moulded in one piece from a high-density SBR compound, with no steel frame, plates or welded parts. There are no moving parts, so you simply bolt it to the wall and leave it, apart from routine checks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for repeated knocks.\u003c\/strong\u003e It absorbs and spreads the energy of reversing vehicles, and the compound is designed for millions of compression cycles. Rubber is unaffected by the rain, frost, UV and temperature extremes of a UK dock, so it suits an open yard in all weathers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA large face to land on.\u003c\/strong\u003e Fitted upright, 600mm of height gives trailers of different bed heights a good target, with sides that taper back towards the face.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eWarehouse and distribution centre loading docks, supermarket, retail depot and cold storage bays, food processing and manufacturing sites, courier and parcel depots, and agricultural buildings and farm stores.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne moulded rubber dock bumper, four anchor studs and four washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e600 x 300 x 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e12kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSBR (styrene-butadiene rubber), high-density compound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003ctd\u003eMoulded in one piece, with tapered sides and no steel frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eFour, 21mm through, each in a 55mm recess 38mm deep from the face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e450 x 150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOther recesses\u003c\/th\u003e\n\u003ctd\u003eTwo shallower recesses, with no hole through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: four M20 x 220mm through-anchor studs and four washers 50mm across, which fit inside the 55mm recess\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad or compression rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right dock bumper\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA fixed lip leveller, and you want a large face at only 80mm deep\u003c\/td\u003e\n\u003ctd\u003eThis bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA narrower moulded bumper with more depth\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a006\"\u003e600 x 250 x 108mm moulded bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEven shallower, with a replaceable face\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/shallow-dock-bumper-765-x-270-x-66mm\"\u003e765 x 270 x 66mm rubber face\u003c\/a\u003e or \u003ca href=\"\/products\/low-profile-dock-bumper-765-x-270-x-66mm\"\u003eyellow UHMWPE face\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers that rub up and down during loading\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHard, repeated impacts on a busy bay\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-600-x-380-x-105-mm\"\u003e600 x 380 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBefore you order, measure your current stand-off and check it against your leveller lip. Going shallower brings the trailer closer, so check that the trailers you handle still clear the leveller and the building. Match the depth of any other bumpers on the same dock, because the one that stands furthest out takes the contact first.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMount in pairs, one either side of the dock opening, at trailer bed height, approximately 1200 to 1300mm from the ground for standard UK trailers. Use the supplied M20 studs and washers, or M16 or M20 through-bolts if your wall needs something different. Offer the bumper up and mark from its own holes before you drill, and have a competent installer confirm that the wall and anchors suit the loads at your dock.\u003c\/p\u003e\n\u003cp\u003eOn high traffic docks with 20 or more movements a day, inspect every 6 months. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many dock bumpers do I need per door?\u003c\/summary\u003e\u003cp\u003eMost loading bays use two, one on each side of the dock leveller. The price shown is for one bumper, so add quantity 2 for a typical door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich way up does it fit?\u003c\/summary\u003e\u003cp\u003eIt is normally fitted upright, so 600mm runs up the wall and the trailer has more height to land on.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included with each bumper: four M20 x 220mm through-anchor studs and four washers 50mm across, which sit in the bottom of the recesses.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy are there six recesses but only four holes?\u003c\/summary\u003e\u003cp\u003eThe four outer recesses have a hole through for fixing. The two in the middle of each end are shallower and do not go through.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it heavy to fit?\u003c\/summary\u003e\u003cp\u003eAt 12kg, one person can lift it, though a second pair of hands makes holding, marking and drilling easier.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need above, normally two per door. Express UK delivery. For a delivery date, a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 600 x 300 x 80mm","offer_id":45580445253930,"sku":"IND_SPC50688","price":187.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/low-profile-rubber-dock-bumper-600-x-300-x-80mm-concrete-loading-dock.jpg?v=1793882628"},{"product_id":"dock-bumper-300-x-320-x-105mm","title":"Laminated Rubber Dock Bumper 300 x 320 x 105mm with Free Fixings | Conveyor Belt, Single Steel Foot | Heavy Duty Loading Bay Protection","description":"\u003cp\u003eEvery reversing HGV ends its manoeuvre against something. If that is your dock wall or leveller, the repair bill lands on you. This laminated dock bumper gives the trailer a block of rubber to meet instead. It measures 300 x 320 x 105mm overall and weighs 14.5kg. Layers of rubber conveyor stand on edge, clamped by two bolts between a flat steel plate and a steel foot, with two fixing holes in the foot. It suits a dock with little wall to spare beside the leveller, and the free fixings are in the price.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/laminated-dock-bumper-300-x-320-x-105mm-single-foot-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the laminated dock bumper 300 x 320 x 105mm with its 250mm rubber block, single 65mm steel foot, two fixing holes and two clamping bolts\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy laminated conveyor belt works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe plies take the knock on edge.\u003c\/strong\u003e The block is a stack of rubber conveyor layers standing on edge, with those edges facing the vehicle. Conveyor belt is rubber reinforced with textile fabric, so the stack can take a lot of force without being damaged. It is a time tested way to protect a loading dock, and conveyor belt rubber is designed for millions of compression cycles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne foot keeps it compact.\u003c\/strong\u003e A 65mm steel foot runs along one side of the 250mm block, and the other side has only a flat plate. That is why it needs just 320mm of wall across, where our twin-foot version needs 380mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou fix through steel, not rubber.\u003c\/strong\u003e Both fixing holes are in the foot, 250mm apart, clear of the rubber that the vehicle touches. With only two fixing points, this bumper depends on a sound wall and good anchors, so choose the twin-foot version if you want fixings on both sides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt stands 105mm off the wall.\u003c\/strong\u003e That stand-off sets how far a trailer stops from your dock face, and it gives the rubber room to do its job before anything reaches the concrete or the leveller. Rubber is unaffected by the rain and frost of a UK yard, so it suits an open bay in all weathers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacement is simple.\u003c\/strong\u003e A worn bumper comes off at its two fixings and a new one goes on in the same holes. That is a far smaller job than repairing a broken dock edge or a bent leveller frame.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eWarehouse and distribution centre loading docks, supermarket and retail depots, food and cold store goods-in doors, manufacturing dispatch bays, parcel depots and farm stores. The compact size suits a single door, or a dock with limited wall either side of the leveller.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne laminated dock bumper, plus two anchors and two washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e300 x 320 x 105mm, including the foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber block\u003c\/th\u003e\n\u003ctd\u003e300 x 250 x 105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber\u003c\/th\u003e\n\u003ctd\u003eNatural and SBR rubber conveyor, laminated, plies on edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSteel\u003c\/th\u003e\n\u003ctd\u003eOne foot 65mm wide with a 65mm upright, and one flat plate on the other side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamping bolts\u003c\/th\u003e\n\u003ctd\u003eTwo, at 200mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, about 22mm, 250mm apart, both in the foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: two M20 through-anchor studs 200 to 220mm long and two heavy washers 65mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack rubber, silver steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA single door, or only about 320mm of wall beside the leveller\u003c\/td\u003e\n\u003ctd\u003eThis bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same rubber block with a steel foot and fixings on both sides\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-300-x-380-x-105-mm\"\u003e300 x 380 x 105mm twin-foot bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA wider contact area for trailers that park off line\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-600-x-380-x-105-mm\"\u003e600 x 380 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe widest laminated option\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-laminated-rubber-conveyor-900-x-400-x-95-mm\"\u003e900 x 400 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy HGV bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 320 x 300mm of clear, sound surface. Check that the 105mm stand-off matches any other bumpers on the same dock, because the one that stands furthest out takes the contact first.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMost docks use one bumper each side of the opening, at trailer bed height, approximately 1200 to 1300mm from the ground for standard UK trailers. Offer the bumper up, mark from its two holes and use the supplied M20 anchors with the washers. Have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what its fixing point can take. At 14.5kg, one person can lift it, though a second pair of hands makes drilling and fixing easier.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber, bolts and fixings during routine dock inspections. On docks with 20 or more vehicle movements a day, we recommend inspecting every 6 months. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, free fixings are included: two M20 through-anchor studs 200 to 220mm long and two heavy washers 65mm across. Drill to suit the anchor and check it against your wall before fixing.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is this different from the 300 x 380mm bumper?\u003c\/summary\u003e\u003cp\u003eThe rubber block is the same size. This one has one steel foot with two fixing holes, so it needs 320mm of wall. The 300 x 380mm has a foot on each side with four fixing holes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it solid rubber?\u003c\/summary\u003e\u003cp\u003eNo, and that is the point of this design. It is built from layers of conveyor belt, which is rubber reinforced with textile fabric. The textile edges can look frayed as the bumper wears. That is normal for this type of bumper.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it strong enough for HGVs?\u003c\/summary\u003e\u003cp\u003eIt is made for loading dock contact from reversing vehicles, but no load figure is published for it. It is a compact bumper, so on a very busy bay or where trailers park off line, a wider laminated bumper or a low friction face may suit you better. Call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 300 x 320 x 105mm","offer_id":45578687775018,"sku":"IND_SPC50677","price":180.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/laminated-dock-bumper-300-x-320-x-105mm-concrete-loading-dock.jpg?v=1793880119"},{"product_id":"l-shape-dock-bumper-450-x-450-x-100-mm","title":"L-Shape Rubber Dock Bumper | 450 x 450 x 100mm TPX Tyre Compound | Corner Loading Bay Protection","description":"\u003cp\u003eA trailer reversing slightly off line rarely hits the neat patch of wall where a rectangular buffer sits. It catches the top edge of the dock instead. This L-shape rubber dock bumper is made for that spot. It is a single 450 x 450 x 100mm block of fibre-filled TPX tyre compound, weighing 14kg and fixed at three points, so one part protects along the dock edge and down the face at the same time. It suits facilities managers, loading bay engineers and contractors looking after busy HGV bays, where a chipped dock edge soon turns into a concrete repair.\u003c\/p\u003e\n\u003ch2\u003eWhy this L-shape dock bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA compound picked for toughness.\u003c\/strong\u003e Fibre-filled tyre compound is an extremely tough grade of rubber. Look at it first where bumpers take regular contact from heavy vehicles rather than an occasional touch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtection in two directions.\u003c\/strong\u003e Each arm is 200mm wide and the bumper spans 450mm both ways. Set at the top of a dock wall, one arm follows the edge and the other drops down the face, so the area a flat buffer leaves bare is covered by the same block.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixings spread across the shape.\u003c\/strong\u003e One hole sits in the angle and one towards the end of each arm, on 250mm centres. The load is shared across both arms rather than resting on a single line of bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt heads kept out of the way.\u003c\/strong\u003e Each 28mm through hole opens into a 70mm recess, 50mm deep, so a bolt head and washer sit below the working face. The 100mm depth holds the trailer off the wall, and the sides taper by 12mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat to expect.\u003c\/strong\u003e No compression or load rating is published for this line. No back plate or front plate is available, so a worn bumper is replaced as a whole unit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFibre-filled TPX tyre compound\u003c\/li\u003e\n\u003cli\u003eCovers the dock edge and the dock face in one block\u003c\/li\u003e\n\u003cli\u003eThree recessed fixing holes on 250mm centres\u003c\/li\u003e\n\u003cli\u003eBolts through to concrete or steel dock structure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eYou will find this type of bumper on raised concrete docks at distribution centres, on steel dock structures in factories, and beside dock levellers at goods-in doors. It also makes a sensible repair where an edge has started to break up and you want to stop further strikes reaching it. On longer docks it works alongside rectangular bumpers, which take the main contact lower down the wall.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eL-shape, one piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eFibre-filled TPX tyre compound rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e450mm x 450mm x 100mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm width\u003c\/th\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e14kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eThree, on 250mm centres, 100mm in from the outer edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThrough hole\u003c\/th\u003e\n\u003ctd\u003e28mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecess\u003c\/th\u003e\n\u003ctd\u003e70mm diameter, 50mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide taper\u003c\/th\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing method\u003c\/th\u003e\n\u003ctd\u003eBolt-through wall mounting, M16 or M20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eNot listed as part of this item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate or front plate\u003c\/th\u003e\n\u003ctd\u003eNone available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompression or load rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIND_SPC50673\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the right dock bumper\u003c\/h2\u003e\n\u003cp\u003eStart with where the strikes land and how often. Then measure the stand-off of any bumpers already fitted, because a new one standing further out than its neighbours takes the first hit from every trailer.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour dock\u003c\/th\u003e\n\u003cth\u003eBest match\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBusy bay with regular strikes at the top edge\u003c\/td\u003e\n\u003ctd\u003eThis tyre compound L-shape bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSame size in SBR rubber, with free fixings\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a014\"\u003eL shaped SBR bumper, 450 x 450 x 100mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou want a front plate option on an L-shape\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a005\"\u003eL shaped bumper, 440 x 440 x 95mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe main dock face needs covering, not the edge\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-260-x-100mm\"\u003e750 x 250 x 100mm rubber bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixed rubber tears as the trailer rises and sinks\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm sliding bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eUse the marking-out guide in the gallery to set out the three holes, and check that each one lands on sound structure and clears the leveller, door guides and pipework. At 14kg one person can carry it, though a second pair of hands helps when holding it up to mark and bolt. Have a competent installer confirm that the wall and bolts suit the loads at your dock. Check the rubber and bolts at routine inspections, and replace the bumper if it splits or works loose. A bumper is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per loading door?\u003c\/summary\u003e\u003cp\u003eUsually two, mounted in a pair either side of the dock opening. The price is for one bumper, so set the quantity to 2 for a typical door. A quarter turn takes the same part from one side of the door to the other, because the arms and holes are symmetrical.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre bolts included?\u003c\/summary\u003e\u003cp\u003eFixings are not listed as part of this item, so allow for M16 or M20 through-bolts and suitable washers. The right bolt depends on your wall, so ask your installer to choose them. The 70mm recess and 28mm hole show what will fit.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy choose tyre compound over standard rubber?\u003c\/summary\u003e\u003cp\u003eChoose it where toughness matters most, such as a bay taking regular HGV contact. If your dock sees lighter use, the SBR version of this size linked above costs less. No load rating is published for either, so the choice comes down to how hard the bay works.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I fit a front plate later?\u003c\/summary\u003e\u003cp\u003eNo. Neither a back plate nor a front plate is available for this bumper. It bolts straight to the structure and is replaced as one piece when worn. If you want a replaceable face, look at our sliding dock bumpers.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat are the exact hole positions?\u003c\/summary\u003e\u003cp\u003eOne hole sits in the angle, 100mm in from both outer edges. The other two are 250mm along each arm from that hole, which puts them 100mm from the arm ends. The dimension drawing and marking-out guide in the gallery show the full layout.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need above; the delivery estimate is shown next to the price. Fitting out several doors or a whole site? Call 01744 520 110 or email sales@industrialsuppliesco.co.uk with your door count and we will help you work out what you need.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cp\u003eThis L-shape rubber dock bumper is engineered for heavy-duty loading dock environments, protecting dock walls, levellers, and vehicle bodywork from the repeated impact of reversing HGVs, vans, and trailers. Built from rubber in an L-profile, it delivers outstanding energy absorption, long service life, and all-weather performance in UK loading bay conditions.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy Impact Absorption\u003c\/strong\u003e — Absorbs and dissipates kinetic energy from reversing vehicles, protecting your dock structure and vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Service Life\u003c\/strong\u003e — rubber L-profile construction is designed for millions of compression cycles without cracking or permanent deformation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Weather Performance\u003c\/strong\u003e — Rubber is unaffected by rain, frost, UV, and temperature extremes common in UK dock environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Maintenance\u003c\/strong\u003e — No moving parts. Simply bolt to the wall and leave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects Building \u0026amp; Vehicles\u003c\/strong\u003e — Prevents structural damage to dock walls and costly chassis\/bodywork damage to delivery vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e — Standard bolt-through fixing to concrete or steel dock structure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eL-Profile Corner Protection\u003c\/h3\u003e\n\u003cp\u003eThe L-shape profile provides protection on two planes simultaneously — ideal for dock corners, door frames, and column edges that are vulnerable to reversing vehicle strikes. The angled face guides vehicles and deflects impact away from vulnerable building structures.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarehouse and distribution centre loading docks\u003c\/li\u003e\n\u003cli\u003eSupermarket, retail depot and cold storage bays\u003c\/li\u003e\n\u003cli\u003eFood processing and manufacturing facilities\u003c\/li\u003e\n\u003cli\u003eCourier and parcel depot loading areas\u003c\/li\u003e\n\u003cli\u003eAgricultural buildings and farm storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003cp\u003eMount in pairs either side of the dock opening at trailer bed height (approx. 1200–1300mm from ground for standard UK trailers). Use M16 or M20 through-bolts into a suitable substrate. Inspect every 6 months on high-traffic docks (20+ movements\/day).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eExpress UK delivery. For bulk quantities contact our team.\u003c\/em\u003e\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 450 x 450 x 100mm","offer_id":45579451990314,"sku":"IND_SPC50673","price":148.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/l-shape-rubber-dock-bumper-450x450mm-loading-dock-wall.jpg?v=1793695581"},{"product_id":"nylon-h-profile-dock-bumper-750-x-265-x-125mm","title":"Nylon 'H' Profile Dock Bumper 750 x 265 x 125mm with Free Fixings | Sliding Cast Nylon Face","description":"\u003cp\u003e\u003cstrong\u003eTrailers do not stay still on a loading bay, and this bumper moves with them.\u003c\/strong\u003e The suspension drops as a forklift drives on and rises as it drives off, and a fixed bumper gets dragged with every movement. Here a solid yellow cast nylon front plate sits in a black steel cradle and slides up and down with the trailer. It suits distribution centres, factories and goods-in doors where trailers load and unload all day and ordinary buffers keep tearing. You can buy the complete bumper, with fixings included free, or any single part from this page.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e750 x 265 x 125mm, weighing 35kg\u003c\/li\u003e\n\u003cli\u003eFree fixings included with the Dock Bumper option: six M16 through-anchor studs\u003c\/li\u003e\n\u003cli\u003eSolid cast nylon 6 face, 100mm thick, with no holes or fixings in it\u003c\/li\u003e\n\u003cli\u003eSlides up and down in its steel cradle as the trailer moves\u003c\/li\u003e\n\u003cli\u003ePlate turns 180 degrees and reverses back to front, for up to 4x the life of a standard bumper\u003c\/li\u003e\n\u003cli\u003e20mm rubber packer behind the plate, so it can still compress\u003c\/li\u003e\n\u003cli\u003eSix 17.5mm fixing holes in the back plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/nylon-h-profile-dock-bumper-750-x-265-x-125mm-drawing-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the nylon H profile dock bumper 750 x 265 x 125mm with back plate hole positions, the assembly seen from above with its rubber packer, a photo of the end of the bumper and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a Sliding Nylon Bumper Lasts\u003c\/h2\u003e\n\u003ch3\u003eThe plate moves with the trailer\u003c\/h3\u003e\n\u003cp\u003eThe front plate has an H profile, with a slot along each long side. The lips of the steel cradle sit in those slots, so the plate is held against the wall but stays free to slide. The hard-wearing nylon slides up and down as the trailer rises and falls, instead of being dragged.\u003c\/p\u003e\n\u003ch3\u003eOne plate has several working faces\u003c\/h3\u003e\n\u003cp\u003eWhen the face wears, the plate can be turned 180 degrees and reversed back to front, giving up to 4x the life of a standard bumper. You get that extra life before you need to buy a new plate.\u003c\/p\u003e\n\u003ch3\u003eCast nylon takes the rubbing\u003c\/h3\u003e\n\u003cp\u003eThe plate is 100mm of cast nylon 6, a tough engineering plastic that stands up to abrasion. There are no holes or fixings in the front face, so there is nothing on the surface for the back of a trailer to catch.\u003c\/p\u003e\n\u003ch3\u003eThe packer keeps the cushion\u003c\/h3\u003e\n\u003cp\u003eA 20mm rubber packer sits behind the plate. It allows fine adjustment of how far the bumper projects from the wall while keeping the bumper's ability to compress.\u003c\/p\u003e\n\u003ch3\u003eLoad figures\u003c\/h3\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch3\u003eDock Bumper\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eComplete bumper: steel cradle back plate, rubber packer and cast nylon front plate, plus free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 750 x 265 x 125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace colour\u003c\/th\u003e\n\u003ctd\u003eYellow. Also available in black, special order only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: 6 M16 through-anchor studs, 125 to 140mm long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIND_SPC50665\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFront Plate\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCast nylon 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 750 x 250 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eH section, slots 20mm wide and 50mm deep, 10mm chamfers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e16kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003ePacker\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStyrene-butadiene rubber (SBR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 750 x 250 x 20mm, with nine 50mm holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eBack Plate\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel cradle, black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 755 x 266 x 66mm, 6mm steel, 176mm opening between the lips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e6 x 17.5mm: two columns at 120mm centres, rows at 278mm centres, 100mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhich Part Do You Need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNew loading bay, or a worn out buffer to replace\u003c\/td\u003e\n\u003ctd\u003eDock Bumper, normally one each side of the leveller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNylon face worn on all sides, cradle still sound\u003c\/td\u003e\n\u003ctd\u003eFront Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBumper needs to stand slightly further from the wall\u003c\/td\u003e\n\u003ctd\u003ePacker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCradle bent or corroded, plate still good\u003c\/td\u003e\n\u003ctd\u003eBack Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicles riding over the top of the bumper\u003c\/td\u003e\n\u003ctd\u003eCall us about the compatible angle bracket, 250 x 200 x 150mm, black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNeed something different? The \u003ca href=\"\/products\/premium-nylon-dock-bumper\"\u003e450 x 265 x 125mm nylon bumper\u003c\/a\u003e is the shorter version. The \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm bumper\u003c\/a\u003e has a sliding UHMWPE face and stands closer to the wall. Measure your existing projection before changing depth, because it sets the gap between the trailer and the leveller. You can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eThis part should be attached to flat solid concrete without cracks or hollows, because a fixing into broken concrete will not hold. Mark out from the drawing above and fix with the six free M16 through-anchor studs, having a competent installer confirm that they suit your wall and the loads at your dock, because a bumper can only pass on what the wall can take. At 35kg it is a two-person lift. Most docks fit them upright and level with each other, either side of the leveller.\u003c\/p\u003e\n\u003cp\u003eCheck the face and fixings during routine dock inspections, and turn the plate before wear reaches the slots. A dock bumper protects the building and vehicle from routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many dock bumpers do I need per door?\u003c\/summary\u003e\u003cp\u003eMost loading bays use two, one each side of the dock leveller, so the trailer lands evenly on both. The price shown is for one bumper, so add a quantity of 2 for a typical door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy does the front plate slide?\u003c\/summary\u003e\u003cp\u003eA loaded trailer moves up and down on its suspension while it sits against the dock. Because the plate can travel with it in the cradle, the trailer is not dragging across a fixed face each time a forklift drives on or off.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I buy just the front plate, packer or back plate?\u003c\/summary\u003e\u003cp\u003eYes. Choose the part from the options at the top of this page. They are the parts used in this 750 x 265 x 125mm bumper, so you can replace one part and keep the rest.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes, with the complete Dock Bumper. Free fixings are six M16 through-anchor studs, 125 to 140mm long, one for each of the 17.5mm holes in the back plate, for fitting into flat solid concrete. They are not included with the single parts.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eChoose your part at the top of the page and add the quantity you need. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through the parts with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 750 x 265 x 125mm","offer_id":45579902681386,"sku":"IND_SPC50665","price":1086.9,"currency_code":"GBP","in_stock":true},{"title":"Packer - 750 x 250 x 20mm","offer_id":45592480448810,"sku":"IND_SPC50666","price":65.9,"currency_code":"GBP","in_stock":true},{"title":"Front Plate - 750 x 250 x 100mm","offer_id":45592301568298,"sku":"IND_SPC50667","price":674.9,"currency_code":"GBP","in_stock":true},{"title":"Back Plate - 755 x 266 x 66mm","offer_id":45592503648554,"sku":"IND_SPC50668","price":312.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-nylon-dock-bumper-750-x-265-x-125mm-concrete-loading-dock.jpg?v=1793871717"},{"product_id":"dock-laminated-rubber-conveyor-900-x-400-x-95-mm","title":"Laminated Rubber Conveyor Dock Bumper with Free Fixings | 900 x 400 x 105mm | Twin Steel Flanges, 41kg | Heavy Duty","description":"\u003cp\u003e\u003cstrong\u003eSome docks need more rubber than a small block can give. This is the long option: 900mm of conveyor belt on edge.\u003c\/strong\u003e If your trailers sit at different heights, or a small bumper keeps getting missed, a long face gives the vehicle more chance of meeting rubber and not concrete. It is a long-established loading bay design, 900mm long and 400mm across its steel flanges, built from 41kg of conveyor belt and steel, with the fixings included free. It is for warehouse managers, site maintenance teams and installers with HGV bays and goods-in doors that take regular knocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e900 x 400 x 105mm overall, with a 900 x 250mm rubber block\u003c\/li\u003e\n\u003cli\u003eFree fixings included: six M16 through-anchor studs and six washers\u003c\/li\u003e\n\u003cli\u003eWeight 41kg\u003c\/li\u003e\n\u003cli\u003eSix 18mm fixing holes, three in each steel flange\u003c\/li\u003e\n\u003cli\u003eFour clamping bolts through the block\u003c\/li\u003e\n\u003cli\u003eSold singly, and most doors use two\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/long-laminated-dock-bumper-900-x-400-x-105mm-drawing-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the long laminated dock bumper 900 x 400 x 105mm with face view, six fixing holes at 350mm spacing, end view, steel flange with four bolts, a view of the build and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy This Bumper Works\u003c\/h2\u003e\n\u003ch3\u003eThe plies take the knock on edge\u003c\/h3\u003e\n\u003cp\u003eThe face is a stack of conveyor belt strips standing side by side, with their cut edges facing the vehicle. Conveyor belt is rubber reinforced with textile, so each strip is tough in its own right, and on edge the stack can take a lot of force without damage. That is why this design is still widely used on loading docks. It absorbs and dissipates the energy of a reversing vehicle, protecting both your dock structure and the vehicle's chassis and bodywork. It is designed for millions of compression cycles without cracking or permanent deformation.\u003c\/p\u003e\n\u003ch3\u003e900mm of face covers more trailer heights\u003c\/h3\u003e\n\u003cp\u003eFitted upright, the rubber runs 900mm from top to bottom. Trailers vary in bed height and ride lower as they are loaded, so a long face gives the vehicle more chance of meeting rubber and not concrete.\u003c\/p\u003e\n\u003ch3\u003eThe steel flanges keep your fixings out of the way\u003c\/h3\u003e\n\u003cp\u003eA steel flange runs the full length of each side, 75mm wide, with three 18mm holes in it. Your fixings go through the steel beside the rubber, so they sit clear of the face the vehicle touches. Four bolts at 265mm centres clamp the plies together.\u003c\/p\u003e\n\u003ch3\u003eAll weather, low maintenance\u003c\/h3\u003e\n\u003cp\u003eThe rubber is unaffected by the rain, frost, UV and temperature extremes common on UK docks, and there are no moving parts. When a bumper is finally worn, it comes off at its six fixings and a new one goes on in the same holes, which is a far smaller job than repairing a broken dock edge or a bent leveller frame.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eYou will find long laminated bumpers on warehouse and distribution centre loading docks, at supermarket, retail depot and cold storage bays, in food processing and manufacturing plants, in courier and parcel depots, and on agricultural buildings and farm stores. They suit bays that take a mix of vehicles, where the contact point changes from one delivery to the next. If trailers rub up and down hard during loading, a low friction face may last longer, so look at the options below.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne laminated dock bumper with its steel flanges and clamping bolts, plus free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e900 x 400mm, including both flanges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth from wall\u003c\/th\u003e\n\u003ctd\u003eSold as 105mm. The dimension drawing shows 95mm, so allow 95 to 105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e41kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber face\u003c\/th\u003e\n\u003ctd\u003e900 x 250mm, laminated rubber conveyor belt (multi-ply), on edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlanges\u003c\/th\u003e\n\u003ctd\u003eTwo steel flanges, each 75mm wide, with a 75mm upright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eSix, 18mm diameter, three in each flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole spacing down each flange\u003c\/th\u003e\n\u003ctd\u003e100mm from the end, then 350mm, 350mm and 100mm to the other end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBetween the two rows of holes\u003c\/th\u003e\n\u003ctd\u003eAbout 350mm. Check against the bumper before you drill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamping bolts\u003c\/th\u003e\n\u003ctd\u003eFour, at 265mm centres, 50mm from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack rubber, silver steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: 6 M16 through-anchor studs, 125 to 140mm long, and 6 washers (50mm OD, 16mm ID, 3mm thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIND_SPC50492\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs This the Right Bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed vehicles, or a wide range of trailer heights\u003c\/td\u003e\n\u003ctd\u003eThis 900 x 400 x 105mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same build with less wall to fix to\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-600-x-380-x-105-mm\"\u003e600 x 380 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA single door, or limited wall beside the leveller\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-300-x-380-x-105-mm\"\u003e300 x 380 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy HGV bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers that ride up over the dock edge\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/steel-conveyor-belt-dock-bumper-730-x-280-x-140mm\"\u003e730 x 280 x 140mm bumper with a steel hood\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 900 x 400mm of clear, sound surface. Check the depth against any other bumpers on the same dock, because the one that stands furthest out takes the contact first. You can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eMount in pairs, one each side of the dock opening, at trailer bed height, approximately 1200 to 1300mm from the ground for standard UK trailers. At 41kg, plan on two people or a lifting aid. Use the drawing above to plan the position, then offer the bumper up and mark through the holes before you drill, because the distance between the two rows of holes is approximate. The free M16 through-anchor studs and washers are for fixing into sound concrete, and the 18mm holes suit them. If you are fixing to a steel dock structure, use M16 through-bolts instead. Have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what its fixing point can take.\u003c\/p\u003e\n\u003cp\u003eInspect every 6 months on high-traffic docks of 20 or more movements a day. Check the rubber, bolts and fixings, and replace the bumper once the plies are badly torn or worn. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with each bumper: six M16 through-anchor studs, 125 to 140mm long, and six washers (50mm OD, 16mm ID, 3mm thick), for fitting into sound concrete. The flanges and clamping bolts are already part of the bumper.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy is it 400mm wide if the rubber is 250mm?\u003c\/summary\u003e\u003cp\u003eThe 400mm is the whole bumper, including a 75mm steel flange each side. The rubber face the vehicle meets is 250mm of that. You may see this size of bumper described as 900 x 250mm, which measures the rubber only, so allow for the full 400mm on your wall.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it 95mm or 105mm deep?\u003c\/summary\u003e\u003cp\u003eIt is sold as 105mm, and the dimension drawing shows 95mm from the wall to the rubber face. Conveyor plies are a cut material and the published dimensions are indicative. If your stand-off is critical, call us before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it solid rubber?\u003c\/summary\u003e\u003cp\u003eNo, and that is the point of this design. It is built from layers of conveyor belt, which is rubber reinforced with textile. The textile edges can look frayed as the bumper wears, and on a new one too. That is normal for this type of bumper.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Dock Bumper - 900 x 400 x 105mm","offer_id":44049296097578,"sku":"IND_SPC50492","price":441.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/laminated-conveyor-dock-bumper-900-x-400-hgv-loading-bay.jpg?v=1793696470"},{"product_id":"poly-laminated-rubber-dock-bumper-300-x-380-x-105-mm","title":"Poly Laminated Rubber Dock Bumper 300 x 380 x 105mm with Free Fixings | Conveyor Belt with Twin Steel Flanges | Heavy Duty Loading Bay Protection","description":"\u003cp\u003e\u003cstrong\u003eEvery reversing HGV ends its manoeuvre against something. Give it a block of rubber conveyor belt instead of your dock wall.\u003c\/strong\u003e This laminated dock bumper is a long-established design for loading bays: strips of conveyor belt stood on edge, clamped between two steel angles and bolted to the wall through a foot on each side, with the fixings included free. It is for warehouse managers, site maintenance teams and installers who want a compact bolt-on buffer for a door or leveller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e300 x 380 x 105mm overall, with a 300 x 250 x 105mm rubber block\u003c\/li\u003e\n\u003cli\u003eFree fixings included: four M20 through-anchor studs and four heavy washers\u003c\/li\u003e\n\u003cli\u003eWeight 15kg, so one person can lift it\u003c\/li\u003e\n\u003cli\u003eFour fixing holes, two in each steel foot, about 22mm across\u003c\/li\u003e\n\u003cli\u003eStands 105mm off the wall\u003c\/li\u003e\n\u003cli\u003eSold singly, and most doors use two\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/laminated-dock-bumper-300-x-380-x-105mm-drawing-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the laminated dock bumper 300 x 380 x 105mm with face view, four fixing holes, end view, steel angle with 200mm bolt centres, a view of the build and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy This Build Works\u003c\/h2\u003e\n\u003ch3\u003eThe plies take the knock on edge\u003c\/h3\u003e\n\u003cp\u003eThe block is a stack of conveyor belt strips standing side by side, with their cut edges facing the vehicle. Conveyor belt is rubber reinforced with textile fabric, so each strip is tough in its own right, and on edge the stack can take a lot of force without damage. That is why this design is still widely used on loading docks. It absorbs and dissipates the energy of a reversing vehicle, protecting both your dock structure and the vehicle's chassis and bodywork. It is designed for millions of compression cycles without cracking or permanent deformation.\u003c\/p\u003e\n\u003ch3\u003eA steel foot on each side\u003c\/h3\u003e\n\u003cp\u003eTwo bolts at 200mm centres clamp the block between a steel angle on the left and another on the right. Each angle has a 65mm foot with two fixing holes, so the bumper is held at four points, 380mm across. A vehicle meets the rubber, not your anchors, because the feet sit outside the block.\u003c\/p\u003e\n\u003ch3\u003e105mm off the wall\u003c\/h3\u003e\n\u003cp\u003eThat stand-off sets how far a trailer stops from your dock face, and it gives the rubber room to work before anything reaches the concrete or the leveller.\u003c\/p\u003e\n\u003ch3\u003eAll weather, low maintenance\u003c\/h3\u003e\n\u003cp\u003eThe rubber is unaffected by the rain, frost, UV and temperature extremes common on UK docks, and there are no moving parts. When a bumper is finally worn, it comes off at its four fixings and a new one goes on in the same place, which is a far smaller job than repairing a broken dock edge or a bent leveller frame.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eYou will find bumpers like this on warehouse and distribution centre loading docks, at supermarket, retail depot and cold storage bays, in food processing and manufacturing plants, in courier and parcel depots, and on agricultural buildings and farm stores. Its size suits a single door or the wall either side of a leveller. It needs 380mm of clear wall across its feet, so check the space beside your leveller first.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne laminated dock bumper with its two steel angles and clamping bolts, plus free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e300 x 380 x 105mm, with 380mm measured across the two feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber block\u003c\/th\u003e\n\u003ctd\u003e300 x 250 x 105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber\u003c\/th\u003e\n\u003ctd\u003eLaminated rubber conveyor belt, multi-ply rubber and textile, on edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSteel\u003c\/th\u003e\n\u003ctd\u003eA steel angle each side, with a 65mm foot and a 65mm upright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamping bolts\u003c\/th\u003e\n\u003ctd\u003eTwo, at 200mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eFour, two in each foot, about 22mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003eAbout 335mm across and about 245mm along each foot. Check against the bumper before you drill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack rubber, grey steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: 4 M20 through-anchor studs, 200 to 220mm long, and 4 heavy washers, 65mm OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIND_SPC50200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs This the Right Bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA single door, with room for a fixing foot on both sides\u003c\/td\u003e\n\u003ctd\u003eThis 300 x 380 x 105mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA wider contact area for trailers that park off line\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-600-x-380-x-105-mm\"\u003e600 x 380 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe widest laminated option\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-laminated-rubber-conveyor-900-x-400-x-95-mm\"\u003e900 x 400 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy HGV bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 380 x 300mm of clear, sound surface. Check that the 105mm stand-off matches any other bumpers on the same dock, because the one that stands furthest out takes the contact first. You can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eMount in pairs, one each side of the dock opening, at trailer bed height, approximately 1200 to 1300mm from the ground for standard UK trailers. Offer the bumper up and mark from its own four holes before you drill. The free M20 through-anchor studs and heavy washers are for fixing directly into sound concrete. If you are fixing to a steel dock structure, use M16 or M20 through-bolts to suit it. The holes are about 22mm across, so M20 is the closer fit, and a smaller bolt needs a large washer. Have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what its fixing point can take. At 15kg, one person can lift it, though a second pair of hands makes drilling and fixing easier.\u003c\/p\u003e\n\u003cp\u003eInspect every 6 months on high-traffic docks of 20 or more movements a day. Check the rubber, bolts and fixings, and replace the bumper once the plies are badly torn or worn. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with each bumper: four M20 through-anchor studs, 200 to 220mm long, and four heavy washers, 65mm OD, for fitting directly into sound concrete. The two steel angles and their clamping bolts are already part of the bumper.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it solid rubber?\u003c\/summary\u003e\u003cp\u003eNo, and that is the point of this design. It is built from layers of conveyor belt, which is rubber reinforced with textile fabric. The textile edges can look frayed as the bumper wears, and on a new one too. That is normal for this type of bumper.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich way round does it fit?\u003c\/summary\u003e\u003cp\u003eOur photos show the plies running up and down with a fixing foot on the left and right, so it sits 380mm wide and 300mm tall. Measure your wall for that layout before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it strong enough for HGVs?\u003c\/summary\u003e\u003cp\u003eIt is made for loading dock contact from reversing vehicles, but no load figure is published for it. It is a compact bumper, so on a very busy bay or where trailers park off line, a wider laminated bumper or a low friction face may suit you better. Call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"300mm x 380mm x 105mm","offer_id":46383733866794,"sku":"IND_SPC50200","price":216.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/laminated-dock-bumper-300-x-380-trailer-loading-bay.jpg?v=1793696610"},{"product_id":"poly-laminated-rubber-dock-bumper-600-x-380-x-105-mm","title":"Poly Laminated Rubber Dock Bumper 600 x 380 x 105mm with Free Fixings | Conveyor Belt with Steel Brackets | Heavy Duty Loading Bay Protection","description":"\u003cp\u003e\u003cstrong\u003eA short bumper only protects the height it covers. This one gives you 600mm of rubber conveyor belt to work with.\u003c\/strong\u003e Trailer beds vary, and a trailer rises and drops as it is loaded, so a contact point that suits one vehicle can miss the next. This long laminated dock bumper is a long-established loading bay design: strips of conveyor belt stood on edge, clamped between two steel angles and bolted to the wall through a foot on each side, with the fixings included free. It is for warehouse managers, site maintenance teams and installers with busy bays that see a mix of vehicles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e600 x 380 x 105mm overall, with a 600 x 250 x 105mm rubber block\u003c\/li\u003e\n\u003cli\u003eFree fixings included: four M16 through-anchor studs and four washers\u003c\/li\u003e\n\u003cli\u003eWeight 28kg\u003c\/li\u003e\n\u003cli\u003eFour fixing holes, about 20mm, two in each steel foot\u003c\/li\u003e\n\u003cli\u003eThree clamping bolts through the block\u003c\/li\u003e\n\u003cli\u003eStands 105mm off the wall\u003c\/li\u003e\n\u003cli\u003eSold singly, and most doors use two\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/long-laminated-dock-bumper-600-x-380-x-105mm-drawing-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the long laminated dock bumper 600 x 380 x 105mm with face view, four fixing holes at 324 and 400mm centres, end view, steel angle with three bolts, a view of the build and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a Long Laminated Bumper Works\u003c\/h2\u003e\n\u003ch3\u003eMore rubber where the vehicle lands\u003c\/h3\u003e\n\u003cp\u003eFitted upright, the 600mm length covers twice the height of a \u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-300-x-380-x-105-mm\"\u003e300mm bumper\u003c\/a\u003e. That gives a better chance of the trailer meeting rubber and not your wall, whichever vehicle backs in.\u003c\/p\u003e\n\u003ch3\u003eThe plies take the knock on edge\u003c\/h3\u003e\n\u003cp\u003eThe block is a stack of conveyor belt strips standing side by side, with their cut edges facing the vehicle. Conveyor belt is rubber reinforced with textile fabric, so each strip is tough in its own right, and on edge the stack can take a lot of force without damage. That is why this design is still widely used on loading docks. It absorbs and dissipates the energy of a reversing vehicle, protecting both your dock structure and the vehicle's chassis and bodywork. It is designed for millions of compression cycles without cracking or permanent deformation.\u003c\/p\u003e\n\u003ch3\u003eTwo steel angles hold it all together\u003c\/h3\u003e\n\u003cp\u003eThree bolts pass through the stack and clamp it between a steel angle on each side. Each angle has a 65mm foot with two fixing holes, so you fix through the steel and not through the rubber. Your wall fixings sit either side of the 250mm block, clear of the rubber that the vehicle touches.\u003c\/p\u003e\n\u003ch3\u003e105mm off the wall\u003c\/h3\u003e\n\u003cp\u003eThat stand-off sets how far a trailer stops from your dock face, and it gives the rubber room to do its job before anything reaches the concrete or the leveller.\u003c\/p\u003e\n\u003ch3\u003eAll weather, low maintenance\u003c\/h3\u003e\n\u003cp\u003eThe rubber is unaffected by the rain, frost, UV and temperature extremes common on UK docks, and there are no moving parts. When a bumper is finally worn, it comes off at its four fixings and a new one goes on in the same holes, which is a far smaller job than repairing a broken dock edge or a bent leveller frame.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eYou will find bumpers like this on warehouse and distribution centre loading docks, at supermarket, retail depot and cold storage bays, in food processing and manufacturing plants, in courier and parcel depots, and on agricultural buildings and farm stores. It suits sites that take artics and rigid lorries at the same door, where bed heights differ. If you have limited wall beside the leveller, or trailers that rub up and down hard during loading, look at the options below.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne laminated dock bumper with its two steel angles and clamping bolts, plus free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e600 x 380 x 105mm, with 380mm measured across the two feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber block\u003c\/th\u003e\n\u003ctd\u003e600 x 250 x 105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e28kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber\u003c\/th\u003e\n\u003ctd\u003eLaminated rubber conveyor belt, multi-ply rubber and textile, on edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSteel\u003c\/th\u003e\n\u003ctd\u003eA steel angle each side, with a 65mm foot and a 65mm upright\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamping bolts\u003c\/th\u003e\n\u003ctd\u003eThree, through the block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eFour, two in each foot, about 20mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole positions\u003c\/th\u003e\n\u003ctd\u003e28mm in from the side, 100mm in from each end, so about 324mm across and 400mm along\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack rubber, grey steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: 4 M16 through-anchor studs, 125 to 140mm long, and 4 washers (50mm OD, 16mm ID, 3mm thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eIND_SPC50201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs This the Right Bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy door that takes a mix of vehicles\u003c\/td\u003e\n\u003ctd\u003eThis 600 x 380 x 105mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA single door with limited wall, or a tighter budget\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/poly-laminated-rubber-dock-bumper-300-x-380-x-105-mm\"\u003e300 x 380 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe longest laminated option\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-laminated-rubber-conveyor-900-x-400-x-95-mm\"\u003e900 x 400 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA busy HGV bay where trailers rub up and down\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper with a low friction face\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure before you order. You need 380 x 600mm of clear, sound surface, because both feet sit flat on the wall. Check that the 105mm stand-off matches any other bumpers on the same dock, because the one that stands furthest out takes the contact first. You can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eMount in pairs, one each side of the dock opening, at trailer bed height, approximately 1200 to 1300mm from the ground for standard UK trailers. Mark out from the drawing above, then offer the bumper up and check its four holes against your marks before you drill. The free M16 through-anchor studs and washers are for fixing into sound concrete, and the washers cover the larger 20mm holes in the feet. If you are fixing to a steel dock structure, use M16 or M20 through-bolts to suit it, and check that an M20 bolt passes through the holes first, because it is a tight fit. Have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what its fixing point can take. At 28kg, plan on two people to lift and hold it while you fix it.\u003c\/p\u003e\n\u003cp\u003eInspect every 6 months on high-traffic docks of 20 or more movements a day. Check the rubber, bolts and fixings, and replace the bumper once the plies are badly torn or worn. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with each bumper: four M16 through-anchor studs, 125 to 140mm long, and four washers (50mm OD, 16mm ID, 3mm thick), for fitting into sound concrete. The two steel angles and the three clamping bolts are already part of the bumper.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it fit upright or on its side?\u003c\/summary\u003e\u003cp\u003eMost docks fit it upright for the extra height. The four holes are in the two long feet, so it can be fixed either way round. Check the holes against your wall before you drill.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it solid rubber?\u003c\/summary\u003e\u003cp\u003eNo, and that is the point of this design. It is built from layers of conveyor belt, which is rubber reinforced with textile fabric. The textile edges can look frayed as the bumper wears, and on a new one too. That is normal for this type of bumper.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"600 x 380 x 105 mm","offer_id":46383737405738,"sku":"IND_SPC50201","price":302.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/poly-laminated-dock-bumper-600-x-380-x-105mm-hgv-loading-bay-ec4a84cc-b745-4a52-89dd-6cc11a5cc9ba.jpg?v=1793697425"},{"product_id":"premium-rubber-extrusion-92x95x2000mm","title":"Rubber D Fender Strip - Hollow D Buffer for Loading Dock \u0026 Wall Impact Protection, 96 x 104 x 2000mm","description":"\u003cp\u003eIf forklifts, pallet trucks or reversing vehicles keep catching the same stretch of wall, dock edge or column base, this hollow D rubber extrusion gives that edge a thick, forgiving buffer. Each length is 2 metres of solid black rubber with a flat base, a rounded crown and a D-shaped hollow core running end to end. It is made for warehouse managers, facilities teams and site contractors who need a simple, durable strip they can fix in place and forget. It measures 96mm wide by 104mm high, weighs about 24kg, and is sold per 2 metre length, so you can run one piece across a single doorway or butt several together along a full loading bay.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eThe hollow core takes the knock\u003c\/h3\u003e\n\u003cp\u003eA solid block of rubber transmits much of an impact straight into whatever it is fixed to. The hollow D-section behaves differently: when a vehicle or pallet strikes the rounded crown, the 28mm top wall and the 20mm side walls flex into the 56 x 50mm core, then spring back. That gives the impact somewhere to go before it reaches your wall, dock or racking.\u003c\/p\u003e\n\u003ch3\u003eA flat base that sits square\u003c\/h3\u003e\n\u003cp\u003eThe 26mm base is flat across its full 96mm width, so the extrusion sits square against a wall or dock face and does not rock. A wide, flat contact area also spreads the load from each knock over more of the surface behind it.\u003c\/p\u003e\n\u003ch3\u003eRubber that tolerates hard use\u003c\/h3\u003e\n\u003cp\u003eThe profile is extruded from SBR rubber, a tough general-purpose compound widely used for industrial buffers. It shrugs off scuffs from tyres and forks, does not shatter like plastic, and keeps its shape after repeated contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThick walls all round a hollow D-shaped core\u003c\/li\u003e\n\u003cli\u003eFlat base for square fixing to walls and dock faces\u003c\/li\u003e\n\u003cli\u003eSmooth rounded crown that deflects glancing blows\u003c\/li\u003e\n\u003cli\u003e2 metre lengths that butt together for longer runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eTypical installations include the face of raised loading docks, the base of block walls along forklift aisles, the ends of racking runs, wash bay and workshop walls, and the edges of goods-in areas where trailers and pallet trucks work close to the building. It is also used as a buffer strip on yard walls and around plant rooms where vehicles manoeuvre in tight spaces.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e96mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e104mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2000mm (one length per unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 24kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHollow D-section, flat base, rounded crown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHollow core\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e56mm wide x 50mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWall thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e20mm sides, 26mm base, 28mm crown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included, extrusion only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Extruded rubber can vary slightly between batches, so if an exact size is critical to your job, call us before ordering and we will confirm the current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/hollow-d-rubber-extrusion-96x104x2000mm-technical-drawing.jpg?v=1794333696\" alt=\"Technical drawing of the 96 x 104 x 2000mm hollow D rubber extrusion with cross-section dimensions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the run you need to protect and divide by two to find the number of lengths, rounding up. A standard dock door opening usually needs one or two lengths; a long aisle wall needs one length for every 2 metres. Lengths can be butted end to end for a continuous run, or trimmed to fit at a corner or doorway.\u003c\/p\u003e\n\u003cp\u003eChoose this profile where you want a continuous buffer along an edge. If you need concentrated protection at the points where a trailer actually strikes a dock, a moulded dock bumper is the better choice, and many sites fit both: bumpers either side of the door and this extrusion along the rest of the dock face.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFix the flat base against a sound concrete or masonry surface using anchor bolts sized for your substrate, with large washers or a flat bar inside the core to spread the clamping load. A common method is to drill an access hole through the crown above each fixing so a socket can reach the bolt. Space fixings evenly along the length and close to each end. To cut a length, use a fine-toothed saw or a long, sharp blade, wetted to ease the cut. Check fixings periodically on high-traffic runs and wipe the rubber clean with water and mild detergent.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one length?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for one 2 metre length weighing about 24kg. Add the number of lengths you need to your basket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings supplied?\u003c\/strong\u003e\u003cbr\u003eNo, the extrusion is supplied on its own. Choose anchors to suit your wall or dock, as fixing needs differ between concrete, blockwork and steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it to size?\u003c\/strong\u003e\u003cbr\u003eYes. It cuts cleanly with a fine-toothed saw or a sharp knife, so you can trim lengths on site to fit doorways, corners and the end of a run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stop a lorry?\u003c\/strong\u003e\u003cbr\u003eNo. It cushions knocks and scrapes from vehicles, forklifts and pallet trucks. It is not a vehicle restraint, so use wheel stops, kerbs or barriers where a vehicle must be physically halted.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. Each length is around 24kg, so allow two people to unload and handle longer runs. For larger quantities or a size check against current stock, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226192191875,"sku":"R_ISP517","price":169.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/hollow-d-rubber-extrusion-96x104x2000mm-warehouse-wall.jpg?v=1794333696"},{"product_id":"premium-rubber-extrusion-92-x-95-x-1000-mm","title":"Rubber D Fender Strip 1m - Hollow D Buffer for Loading Dock, Wall \u0026 Column Protection, 98 x 104 x 1000mm","description":"\u003cp\u003eA rubber D fender strip is the simplest way to stop vehicles, forklifts and pallet trucks chewing up the edge of a loading dock, a wall or a column base. This one is a single 1 metre length of black SBR rubber with a flat fixing base, a rounded crown and a hollow D-shaped core running end to end. At 98mm wide and 104mm high it is a full-size dock profile, yet a 1 metre length weighs only about 12kg, so one person can carry it, hold it in place and fix it. It suits warehouse managers, facilities teams and fit-out contractors who need protection on short, specific spots rather than a long continuous run.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA hollow section that gives under impact\u003c\/h3\u003e\n\u003cp\u003eWhen a trailer, fork carriage or pallet strikes the crown, the 29mm top wall and the 20mm side walls flex into the 56 x 50mm hollow core and then recover. That flex absorbs part of the blow before it reaches the concrete or steelwork behind, which is why a hollow D-section protects better than a solid strip of the same size.\u003c\/p\u003e\n\u003ch3\u003eA thick, flat base\u003c\/h3\u003e\n\u003cp\u003eThe base is 26mm thick and flat across the full 98mm width. It sits square against a dock face or wall without rocking, and it gives your fixings a solid bed of rubber to clamp through.\u003c\/p\u003e\n\u003ch3\u003eShort lengths that go where they are needed\u003c\/h3\u003e\n\u003cp\u003eLong extrusions are awkward to handle and often wasted on short jobs. A 1 metre length covers one side of a dock door, the face of a column or a single bay end, and several lengths butt together neatly when you want a longer run.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHollow D-section with thick walls on every side\u003c\/li\u003e\n\u003cli\u003eFlat 98mm base for square fixing to walls and dock faces\u003c\/li\u003e\n\u003cli\u003eRounded crown that turns glancing knocks aside\u003c\/li\u003e\n\u003cli\u003eAbout 12kg per length, easy for one fitter to handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eTypical places are the vertical face of a raised loading dock either side of the door, the base of block walls along forklift aisles, column and racking ends in goods-in areas, vehicle wash bay walls, and the edges of plant rooms and yard walls where vans and HGVs manoeuvre close to the building. It is also handy as a repair piece where a section of older fendering has been torn away.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth (base)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e98mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e104mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e1000mm (one length per unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 12kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHollow D-section, flat base, rounded crown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHollow core\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e56mm wide x 50mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWall thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e20mm sides, 26mm base, 29mm crown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included, strip only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSizes are typical. Extruded rubber varies a little from batch to batch, so if an exact dimension matters for your job, call us before ordering and we will measure the stock we hold.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-98x104x1000-technical-drawing.jpg?v=1794354410\" alt=\"Technical drawing of the 98 x 104 x 1000mm rubber D fender strip with cross-section dimensions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the edge you want to protect and order one length per metre, rounding up. For a single dock door, one length each side of the opening is usual; for a column, one length on the face that takes the knocks. If you are covering a long dock or aisle wall, our \u003ca href=\"\/products\/premium-rubber-extrusion-92x95x2000mm\"\u003e2 metre D fender strip\u003c\/a\u003e in the same profile means fewer joints.\u003c\/p\u003e\n\u003cp\u003eA fender strip spreads protection along an edge. Where trailers back hard onto a dock at the same two points every time, fit moulded dock bumpers at those points and use this strip on the rest of the dock face.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFix the flat base to sound concrete or masonry with anchor bolts suited to the wall, using large washers or a flat bar inside the core to spread the clamping load. Drill a clearance hole through the crown above each fixing so a socket can reach the bolt head. Place a fixing close to each end and space the rest evenly. Cut with a fine-toothed saw or a long sharp blade kept wet. On busy docks, check the fixings now and then and clean the rubber with water and mild detergent.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one length?\u003c\/strong\u003e\u003cbr\u003eYes, one 1 metre length weighing about 12kg. Add as many lengths as your run needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003cbr\u003eNo. The strip is supplied on its own, because the right anchor depends on whether you are fixing into concrete, blockwork or steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it on site?\u003c\/strong\u003e\u003cbr\u003eYes. A fine-toothed saw or sharp wetted blade gives a clean cut, so you can trim lengths around doors, pipes and corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stop a reversing lorry?\u003c\/strong\u003e\u003cbr\u003eNo. It cushions knocks and scrapes. It is not a vehicle restraint, so use wheel stops, kerbs or barriers where a vehicle must be physically halted.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For larger quantities, a stock size check or help choosing between profiles, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226192290179,"sku":"R_ISP519","price":95.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-98x104x1000-loading-dock-face.jpg?v=1794354586"},{"product_id":"premium-rubber-extrusion-92-x-95-x-2440-mm","title":"Rubber D Fender Strip - Hollow D Buffer for Loading Dock \u0026 Warehouse Wall Protection, 98 x 100 x 2440mm","description":"\u003cp\u003eLong runs of loading dock face and warehouse wall take a constant beating from trailers, forklifts and pallet trucks. This rubber D fender strip lines that edge with a thick hollow buffer in a single 2.44 metre length, so one piece covers the width of a typical dock door or a full bay of wall with no joint in the middle. The section measures 98mm wide by 100mm high, with a flat base, a fully rounded crown and a hollow core running end to end. Each length weighs about 22kg and is made from tough SBR rubber, a sensible choice for logistics sites, food and drink depots, builders' merchants and facilities teams who need to protect long straight edges.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eHollow section, softer impact\u003c\/h3\u003e\n\u003cp\u003eA solid rubber bar is stiff, so much of each knock passes straight into the concrete behind it. This strip is hollow. When a trailer bed, a fork tip or a pallet corner strikes the rounded crown, the walls flex into the open core and then recover their shape. The load reaching your dock face or wall is slower and smaller, which means fewer chipped arrises and less patch repair.\u003c\/p\u003e\n\u003ch3\u003eOne long piece\u003c\/h3\u003e\n\u003cp\u003eAt 2.44 metres, each length covers more ground than shorter strips, so there are fewer joints along a run. Fewer joints means fewer ends for a pallet to catch and a neater finish along the dock face or aisle wall.\u003c\/p\u003e\n\u003ch3\u003eA wide flat base\u003c\/h3\u003e\n\u003cp\u003eThe base is flat across the full 98mm width and 19mm thick, so the strip sits square against a wall or dock face without rocking and spreads each knock over a wide strip of the surface behind it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHollow D-section that flexes under impact and springs back\u003c\/li\u003e\n\u003cli\u003e98 x 100mm profile in a single 2.44m length\u003c\/li\u003e\n\u003cli\u003eFlat 19mm base for square fixing to concrete and masonry\u003c\/li\u003e\n\u003cli\u003eRounded crown that deflects glancing blows\u003c\/li\u003e\n\u003cli\u003eTough black SBR rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eFix it horizontally across the face of a raised loading dock to cushion trailer beds as they back on, along the base of blockwork walls beside forklift routes, across the ends of pallet racking runs, around the bottom of goods-in walls, and along vehicle wash bay walls. Bus depots, waste transfer stations and farm buildings use the same strip wherever vehicles work close to a wall.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e98mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2440mm (one length per unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 22kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eStyrene-butadiene rubber (SBR), black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHollow D-section, flat base, rounded crown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBase thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included, extrusion only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Extruded rubber shrinks slightly as it cures and sizes can vary a little from batch to batch, so if an exact size matters for your job, call us before ordering and we will measure current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-98x100x2440mm-technical-drawing.jpg?v=1794354638\" alt=\"Technical drawing of the 98 x 100 x 2440mm rubber D fender strip with cross-section dimensions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the run you need to protect and divide by 2.44 to get the number of lengths, rounding up. This strip suits long straight runs of dock face and wall. For shorter sections, our \u003ca href=\"\/products\/premium-rubber-extrusion-92x95x2000mm\"\u003e2 metre rubber D fender strip\u003c\/a\u003e is easier to handle, and for door edges and corners that take the hardest knocks, the \u003ca href=\"\/products\/premium-rubber-extrusion-92-x-95-x-1000-mm-1\"\u003e1 metre high polymer D fender strip\u003c\/a\u003e uses a tougher compound.\u003c\/p\u003e\n\u003cp\u003eWhere a trailer hits the dock at the same two points every time, fit a moulded dock bumper either side of the door and run this strip along the dock face between and beyond them.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFix the flat base against sound concrete or masonry with anchor bolts sized for your wall. Put a large washer or a short flat bar inside the core at each fixing to spread the clamping load. A common method is to drill an access hole through the crown above each fixing so a socket can reach the bolt. Space fixings evenly along the length and place one close to each end. At 22kg, a full length is easier to lift into place with two people. To cut it, use a fine-toothed saw or a long sharp blade wetted with water. Check fixings now and then on busy runs, and wash the rubber with water and mild detergent.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one length?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for one 2.44 metre length weighing about 22kg. Add the number of lengths you need to your basket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it to fit?\u003c\/strong\u003e\u003cbr\u003eYes. It cuts cleanly with a fine-toothed saw or a wetted sharp blade, so you can trim the last length of a run on site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings supplied?\u003c\/strong\u003e\u003cbr\u003eNo, the strip is supplied on its own. Choose anchors to suit your wall, as concrete, blockwork and steel each need different fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stop a lorry?\u003c\/strong\u003e\u003cbr\u003eNo. It cushions knocks and scrapes from vehicles, forklifts and pallet trucks. It is not a vehicle restraint, so use wheel stops, kerbs or barriers where a vehicle must be physically halted.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For larger quantities or a size check against current stock, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226192322947,"sku":"R_ISP521","price":163.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-98x100x2440mm-loading-dock-face.jpg?v=1794354638"},{"product_id":"premium-rubber-extrusion-70-x-70-mm","title":"Rubber D Fender Strip - Hollow D Buffer for Loading Dock, Wall \u0026 Column Impact Protection, 80 x 70 x 2440mm","description":"\u003cp\u003eWhen pallet trucks, forklifts or reversing vans keep scuffing the same dock edge, wall base or column, this rubber D fender strip puts a tough, springy buffer between the vehicle and your building. It is a hollow D-section rubber extrusion with a flat base, a rounded crown and a D-shaped core running the full length. Each piece is 2440mm long, 80mm across the base and 70mm high, and weighs around 13kg. It suits warehouse managers, facilities teams and contractors who want a low-profile strip that is easy to cut, quick to fix and built for daily knocks.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA hollow core that gives under impact\u003c\/h3\u003e\n\u003cp\u003eSolid rubber passes much of a blow straight through to whatever sits behind it. This profile is hollow, so when a fork tip, wheel or bumper meets the rounded crown, the walls flex inwards into the core and then recover. That short travel absorbs energy that would otherwise chip concrete, crack blockwork or dent cladding.\u003c\/p\u003e\n\u003ch3\u003eFlat 15mm base for a square fit\u003c\/h3\u003e\n\u003cp\u003eThe underside is flat across its full 80mm width with a solid 15mm base under the core. It sits square against a wall or dock face without rocking, and the solid base gives your fixings something firm to clamp.\u003c\/p\u003e\n\u003ch3\u003eLow profile, long run\u003c\/h3\u003e\n\u003cp\u003eAt 70mm high the strip stays neat on walls, kerb edges and racking bases where a bulky fender would get in the way. The 2440mm length covers a typical door opening in one piece and means fewer joints along an aisle.\u003c\/p\u003e\n\u003ch3\u003eSBR rubber built for wear\u003c\/h3\u003e\n\u003cp\u003eThe extrusion is made from SBR, a hard-wearing general-purpose rubber used widely for industrial buffers. It resists scuffing from tyres and forks, does not shatter like plastic, and keeps its shape after repeated contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHollow D-section that flexes and recovers\u003c\/li\u003e\n\u003cli\u003eFlat 80mm base with a solid 15mm floor\u003c\/li\u003e\n\u003cli\u003eLow 70mm height for walls, docks and columns\u003c\/li\u003e\n\u003cli\u003e2440mm lengths that cut on site and butt together\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eCommon jobs include the top edge of raised loading docks, the base of block and panel walls along forklift aisles, the ends of racking runs, column guards in goods-in areas, vehicle wash bay walls, and quay or yard walls where vans and trailers manoeuvre close to the building. It is also fitted along workshop and plant room walls as a rubbing strip for trolleys and pallet trucks.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBase width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2440mm (one length per unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBase thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e15mm under the core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 13kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHollow D-section, flat base, rounded crown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included, extrusion only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Extruded rubber sizes vary slightly from batch to batch, so if an exact size matters for your job, call us before ordering and we will measure current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-80x70x2440-technical-drawing.jpg?v=1794353981\" alt=\"Technical drawing of the 80 x 70 x 2440mm rubber D fender strip with cross-section and length dimensions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the run you want to protect and divide by 2.44 to get the number of lengths, rounding up. One length usually covers a single dock door or a short wall section; a 10 metre aisle wall needs five. Lengths butt end to end for a continuous line and trim easily at corners and doorways.\u003c\/p\u003e\n\u003cp\u003ePick this 80 x 70mm profile for pallet trucks, forklifts, trolleys and light vans. For heavier vehicles or a deeper cushion, our larger \u003ca href=\"\/products\/premium-rubber-extrusion-92x95x2000mm\"\u003e96 x 104mm rubber D fender strip\u003c\/a\u003e gives more rubber between the vehicle and the wall. Where lorries reverse onto a dock, fit moulded dock bumpers at the strike points and use this strip along the rest of the dock edge.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFix the flat base to sound concrete, masonry or steel using anchors sized for the surface. Inside the core, a large washer or a length of flat bar under each bolt head spreads the clamping load across the 15mm base. Drill a small access hole through the crown above each fixing so a socket can reach the bolt. Space fixings evenly and place one close to each end. Cut with a fine-toothed saw or a long sharp blade, wetted to ease the cut. Check fixings from time to time on busy runs, and clean the rubber with water and mild detergent.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one length?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for one 2440mm length weighing about 13kg. Add as many lengths as your run needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings supplied?\u003c\/strong\u003e\u003cbr\u003eNo, the strip comes on its own. Anchors depend on whether you are fixing to concrete, blockwork or steel, so choose them to suit your surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it to length?\u003c\/strong\u003e\u003cbr\u003eYes. It cuts cleanly with a fine-toothed saw or a sharp knife, so you can trim pieces on site for doorways, columns and the end of a run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it stop a vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. It cushions knocks and scrapes from forklifts, pallet trucks and vans. It is not a vehicle restraint, so use wheel stops, kerbs or barriers where a vehicle must be physically halted.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. Each length is around 13kg and 2.44 metres long, so plan for safe handling on delivery. For larger quantities or a size check against current stock, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226192552323,"sku":"R_ISP523","price":102.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-80x70x2440-warehouse-wall.jpg?v=1794353981"},{"product_id":"d-profile-rubber-extrusion-50x30x2500mm","title":"Rubber D Fender Strip - Hollow D Bump Strip for Wall, Dock Edge \u0026 Wash Bay Protection, 56 x 30 x 2500mm","description":"\u003cp\u003ePallet trucks, cages, trolleys and reversing vans tend to hit the same few places: the bottom of a wall along a busy aisle, the edge of a loading dock, the side of a wash bay. This rubber D fender strip puts a hollow rubber buffer along those edges so the rubber takes the scuff instead of the paint, plaster or concrete. Each length is 2.5 metres of black rubber with a flat base, a smooth half-round top and a channel running through the middle. It measures 56mm wide by 30mm high, weighs about 4kg, and is sold per 2.5 metre length. It suits warehouse and facilities managers, fleet depots and site contractors who need a low-profile buffer that is easy to fix and easy to cut.\u003c\/p\u003e\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA hollow section that gives under a knock\u003c\/h3\u003e\n\u003cp\u003eSolid rubber passes much of an impact straight into the surface behind it. This D strip is hollow: a 41mm wide, 16mm high channel runs the full length under the rounded top. When a trolley or pallet truck strikes it, the top flexes into that channel and then recovers, so the strip absorbs the knock rather than simply passing it on.\u003c\/p\u003e\n\u003ch3\u003eLow profile, flat base\u003c\/h3\u003e\n\u003cp\u003eAt only 30mm high it stands proud enough to catch wheels, forks and corners, yet it does not stick out into a walkway or get in the way of doors. The flat 56mm base sits square on a wall, dock face or kerb edge, so it does not rock or twist once fixed.\u003c\/p\u003e\n\u003ch3\u003eTough general-purpose rubber\u003c\/h3\u003e\n\u003cp\u003eThe strip is extruded from SBR rubber, a hard-wearing compound widely used for industrial buffers. It will not crack or splinter like plastic trim, it tolerates scuffs from tyres and steel, and it holds its shape after repeated contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHollow half-round D profile, 56 x 30mm\u003c\/li\u003e\n\u003cli\u003eFlat base for square fixing to walls and dock faces\u003c\/li\u003e\n\u003cli\u003eSmooth rounded top that deflects glancing blows\u003c\/li\u003e\n\u003cli\u003e2.5 metre lengths that butt together for longer runs\u003c\/li\u003e\n\u003cli\u003eCuts on site with a fine-toothed saw or sharp blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eTypical jobs include bump strips along warehouse and factory walls at pallet-truck or trolley height, edge protection on the face of raised loading docks, wall protection in vehicle wash bays and workshops, and buffer strips on goods-in areas, plant rooms and service corridors. It is also fitted to the base of partition walls, the ends of racking runs and the edges of ramps where cages and roll containers are pushed past every day.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth (base)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e56mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2500mm (one length per unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 4kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHollow half-round D, flat base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eInner channel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e41mm wide x 16mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included, strip only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Extruded rubber varies slightly from batch to batch, so if an exact size matters for your job, call us before ordering and we will check current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-56x30x2500mm-technical-drawing.jpg?v=1794354420\" alt=\"Technical drawing of the 56 x 30 x 2500mm rubber D fender strip with cross-section and channel dimensions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the run you want to protect and divide by 2.5 to find the number of lengths, rounding up. A single doorway or dock edge usually needs one length; a long aisle wall needs one length for every 2.5 metres.\u003c\/p\u003e\n\u003cp\u003eThis profile is the right size for trolleys, cages, pallet trucks and light vehicle knocks. Where lorries or forklifts hit hard and often, choose a larger, thicker D fender or moulded dock bumpers, and keep this strip for the lighter-duty edges around the same site.\u003c\/p\u003e\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFix the flat base to a clean, sound surface. For concrete and blockwork, screw or bolt through the base of the channel at even spacing with a washer under each head, drilling a small access hole through the top above each fixing so a driver can reach it. Fix close to each end of every length. On smooth, clean surfaces a suitable construction adhesive can be used alongside mechanical fixings. To cut, use a fine-toothed saw or a long sharp blade wetted with soapy water. Check fixings now and then on busy runs and wipe the rubber clean with water and mild detergent.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one length?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for one 2.5 metre length weighing about 4kg. Add the number of lengths you need to your basket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings supplied?\u003c\/strong\u003e\u003cbr\u003eNo, the strip is supplied on its own. Choose screws, anchors or adhesive to suit your wall, as concrete, blockwork, timber and steel each need different fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it to size?\u003c\/strong\u003e\u003cbr\u003eYes. It cuts cleanly with a fine-toothed saw or a sharp knife, so lengths can be trimmed on site to fit doorways, corners and the end of a run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it protect against a lorry?\u003c\/strong\u003e\u003cbr\u003eNo. It cushions knocks and scrapes from trolleys, pallet trucks and light vehicles. It is not a vehicle restraint; use wheel stops, kerbs or barriers where a vehicle must be stopped.\u003c\/p\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For larger quantities or a size check against current stock, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226192814467,"sku":"R_ISP527","price":66.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-d-fender-strip-56x30mm-warehouse-wall-bump-strip.jpg?v=1794354546"},{"product_id":"premium-d-profile-rubber-extrusion","title":"Half Round Rubber D Strip - Hollow Buffer \u0026 Edge Protection for Walls, Door Frames \u0026 Vans, 34 x 17mm x 12.5m","description":"\u003cp\u003eIf trolleys, roll cages, pallet trucks or doors keep scuffing the same edge, this half-round rubber D strip gives that edge a slim, forgiving buffer. It is a hollow half-round profile in black rubber: a flat 34mm base that fixes to the surface, a smooth rounded face 17mm high, and a half-moon shaped hollow core running the full length. It is supplied as one continuous 12.5 metre length, about 9kg, so a single order covers long wall runs, door frames, vehicle body edges and bench edges, and you cut it to the lengths you need on site. It suits facilities teams, fleet workshops, shopfitters and maintenance engineers who want light impact and edge protection that is quick to fit.\u003c\/p\u003e\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA hollow core that gives, then recovers\u003c\/h3\u003e\n\u003cp\u003eA solid strip passes much of each knock straight into the wall or panel behind it. This profile is hollow, so when a trolley or door strikes the rounded face, the thin rubber walls flex into the core and then spring back to shape. That small amount of give is what stops chipped paint, dented steel and cracked plaster on surfaces that take repeated light contact.\u003c\/p\u003e\n\u003ch3\u003eA flat base that sits tight to the surface\u003c\/h3\u003e\n\u003cp\u003eThe base is flat across its full 34mm width, so the strip sits square against a wall, frame or panel with no rocking and no gap for dirt to collect behind it. A flat base also bonds well with adhesive and gives a solid seat if you screw through it.\u003c\/p\u003e\n\u003ch3\u003eLow profile, long length\u003c\/h3\u003e\n\u003cp\u003eAt only 17mm high, the strip protects an edge without becoming an obstacle itself. It will not catch clothing or create a trip edge the way a deep buffer can, and the 12.5 metre length means fewer joints along a long run.\u003c\/p\u003e\n\u003ch3\u003eRubber, not plastic\u003c\/h3\u003e\n\u003cp\u003eThe profile is extruded from natural\/SBR rubber, a tough general-purpose compound used widely for industrial buffers and seals. It flexes around gentle curves, does not shatter when struck, and stays soft enough to cushion contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHollow half-round profile, 34mm wide x 17mm high\u003c\/li\u003e\n\u003cli\u003eFlat base for adhesive or screw fixing\u003c\/li\u003e\n\u003cli\u003eSmooth rounded face that deflects glancing knocks\u003c\/li\u003e\n\u003cli\u003eOne continuous 12.5 metre length, cut to size on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eTypical uses include a rubbing strip along warehouse and corridor walls at trolley or roll cage height, an edge buffer up steel door frames and loading bay jambs, protection along the edges of workbenches, machine guards and partitions, and a bump strip on the inside of van and trailer bodies where loads shift in transit. Shopfitters use it along counter and display edges, and maintenance teams fit it to the edges of hatches, lids and gates to stop metal-on-metal contact and rattle.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth (base)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e34mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e12,500mm (one 12.5m length per unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 9kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNatural\/SBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eHollow half-round (D-section), flat base, rounded face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings and adhesive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included, strip only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Extruded rubber can vary slightly between batches, so if an exact size is critical to your job, call us before ordering and we will check the current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/half-round-rubber-d-strip-34x17-12-5m-technical-drawing.jpg?v=1794353659\" alt=\"Technical drawing of the 34 x 17mm half-round rubber D strip, 12.5m length, with cross-section dimensions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the total run you want to protect. One 12.5 metre length covers a long corridor wall, several door frames or a full set of bench edges; for longer runs, add a second length and butt the ends together. This slim profile is made for light, repeated contact from people, trolleys, doors and loads. Where forklifts or reversing vehicles hit the wall, choose a much larger rubber D fender or a dock bumper instead, as a 17mm strip will not absorb that level of impact.\u003c\/p\u003e\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eClean and dry the surface, then cut the strip to length with a sharp knife or fine-toothed blade; wetting the blade gives a cleaner cut. On smooth walls, panels and steel, bond the flat base with a rubber-compatible contact or construction adhesive, pressing it firmly along its length. Where knocks are heavier, add screws through the base at regular centres, close to each end, using a washer under the head and keeping screws snug rather than overtightened. The strip bends around gentle curves; for sharp corners, mitre the ends. Wipe clean with water and mild detergent, and check the ends periodically on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for the full 12.5 metres?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for one continuous 12.5 metre length weighing about 9kg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings or adhesive supplied?\u003c\/strong\u003e\u003cbr\u003eNo, the strip is supplied on its own. Choose adhesive or screws to suit your surface, as needs differ between blockwork, plasterboard, timber and steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I cut it into shorter pieces?\u003c\/strong\u003e\u003cbr\u003eYes. It cuts cleanly with a sharp knife, so you can make several short pieces from one length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it protect a wall from forklifts?\u003c\/strong\u003e\u003cbr\u003eNo. It cushions light knocks from trolleys, roll cages, doors and people. For forklift and vehicle impacts, fit a heavy rubber D fender, kerb or barrier.\u003c\/p\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. The strip arrives as one length, so allow space to lay it out before cutting. For larger quantities or a size check against current stock, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226193043843,"sku":"R_ISP529","price":255.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/half-round-rubber-d-strip-warehouse-wall-trolley-protection.jpg?v=1794354092"},{"product_id":"premium-nylon-dock-bumper","title":"Nylon 'H' Profile Dock Bumper 450 x 265 x 125mm with Free Fixings | Sliding Cast Nylon Face, Reversible Plate | HGV Loading Bay","description":"\u003cp\u003e\u003cstrong\u003eTrailers do not stay still on a loading bay, and this bumper moves with them.\u003c\/strong\u003e The suspension drops as a forklift drives on and rises as it drives off, and a fixed bumper gets dragged with every movement. Here a solid yellow cast nylon front plate sits in a black steel cradle and slides up and down with the trailer. It is the shorter 450mm version of our nylon bumper, for bays with less wall to fix to, and the fixings are included free. It suits distribution centres, factories and goods-in doors where trailers load and unload all day and ordinary buffers keep tearing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e450 x 265 x 125mm, weighing 23kg\u003c\/li\u003e\n\u003cli\u003eFree fixings included: four M16 through-anchor studs\u003c\/li\u003e\n\u003cli\u003eSolid cast nylon 6 face, 100mm thick, with no holes or fixings in it\u003c\/li\u003e\n\u003cli\u003eSlides up and down in its steel cradle as the trailer moves\u003c\/li\u003e\n\u003cli\u003ePlate turns 180 degrees and reverses back to front, for up to 4x the life of a standard bumper\u003c\/li\u003e\n\u003cli\u003e20mm rubber packer behind the plate, so it can still compress\u003c\/li\u003e\n\u003cli\u003eFour 18mm fixing holes in the back plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/nylon-h-profile-dock-bumper-450-x-265-x-125mm-drawing-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the nylon H profile dock bumper 450 x 265 x 125mm with back plate hole positions, the assembly seen from above with its rubber packer, a photo of the end of the bumper and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a Sliding Nylon Bumper Lasts\u003c\/h2\u003e\n\u003ch3\u003eThe plate moves with the trailer\u003c\/h3\u003e\n\u003cp\u003eThe front plate has an H profile, with a slot along each long side. The lips of the steel cradle sit in those slots, so the plate is held against the wall but stays free to slide. The hard-wearing nylon slides up and down as the trailer rises and falls, instead of being dragged.\u003c\/p\u003e\n\u003ch3\u003eOne plate has several working faces\u003c\/h3\u003e\n\u003cp\u003eWhen the face wears, the plate can be turned 180 degrees and reversed back to front, giving up to 4x the life of a standard bumper. You get that extra life before you need a new plate.\u003c\/p\u003e\n\u003ch3\u003eCast nylon takes the rubbing\u003c\/h3\u003e\n\u003cp\u003eThe plate is 100mm of cast nylon 6, made to withstand wear and abrasion with high impact resistance and toughness, so it lasts in high-traffic bays. There are no holes or fixings in the front face, so there is nothing on the surface for the back of a trailer to catch. It protects your loading dock and vehicles from impact damage during loading and unloading.\u003c\/p\u003e\n\u003ch3\u003eThe packer keeps the cushion\u003c\/h3\u003e\n\u003cp\u003eA 20mm rubber packer sits behind the plate, so the assembly keeps its ability to compress.\u003c\/p\u003e\n\u003ch3\u003eLoad figures\u003c\/h3\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eThis bumper goes on the dock face either side of a dock leveller or door opening, at distribution centres, manufacturing plants and goods-in bays. Choose the 450mm length where wall space is limited. A longer bumper covers more trailer heights, so if you have the wall and your trailers vary, compare the 750mm version below.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eComplete bumper: steel cradle back plate, rubber packer and cast nylon front plate, plus free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eApprox 450 x 265 x 125mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e23kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront plate\u003c\/th\u003e\n\u003ctd\u003eYellow cast nylon 6, approx 450 x 250 x 100mm, 12kg, H section with slots 20mm wide and 50mm deep, 10mm chamfers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePacker\u003c\/th\u003e\n\u003ctd\u003eStyrene-butadiene rubber (SBR), approx 450 x 250 x 20mm, 2.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack plate\u003c\/th\u003e\n\u003ctd\u003eSteel cradle, black powder coat, approx 456 x 266 x 77mm, 9.12kg, 176mm opening between the lips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e4 x 18mm: two columns at 120mm centres, two rows at 256mm centres, 100mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: 4 M16 through-anchor studs, 125 to 140mm long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eR_ISP531\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs This the Right Bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA sliding nylon face, with limited wall to fix to\u003c\/td\u003e\n\u003ctd\u003eThis 450 x 265 x 125mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same build, covering more trailer heights\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/nylon-h-profile-dock-bumper-750-x-265-x-125mm\"\u003e750 x 265 x 125mm nylon bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA sliding UHMWPE face that stands closer to the wall\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers that override the dock\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-dock-bumper-3\"\u003e960 x 590 x 200mm extra tall steel bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicles riding over the top of this bumper\u003c\/td\u003e\n\u003ctd\u003eCall us about the compatible angle bracket, 250 x 200 x 150mm, black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure your existing projection before changing depth, because it sets the gap between the trailer and the leveller. You can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eFit to flat, solid concrete without cracks or hollows. Mark out from the drawing above and fix with the four free M16 through-anchor studs, having a competent installer confirm that they suit your wall and the loads at your dock, because a bumper can only pass on what the wall can take. At 23kg, plan on two people to hold it while you fix it. Most docks fit them upright and level with each other, either side of the leveller.\u003c\/p\u003e\n\u003cp\u003eCheck the face and fixings during routine dock inspections, and turn the plate before wear reaches the slots. A dock bumper protects the building and vehicle from routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat material is it made from?\u003c\/summary\u003e\u003cp\u003eThe front plate is cast nylon 6, which gives durability and impact resistance. Behind it are a rubber packer and a steel cradle back plate.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per door?\u003c\/summary\u003e\u003cp\u003eMost loading bays use two, one each side of the dock leveller, so the trailer lands evenly on both. The price shown is for one bumper, so add a quantity of 2 for a typical door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy does the front plate slide?\u003c\/summary\u003e\u003cp\u003eA loaded trailer moves up and down on its suspension while it sits against the dock. Because the plate can travel with it in the cradle, the trailer is not dragging across a fixed face each time a forklift drives on or off.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow does it protect my equipment?\u003c\/summary\u003e\u003cp\u003eIt takes the impact and prevents damage to vehicles and loading dock structures during operations.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with each bumper: four M16 through-anchor studs, 125 to 140mm long, one for each of the 18mm holes in the back plate, for fitting into flat solid concrete.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226193109379,"sku":"R_ISP531","price":851.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/short-yellow-nylon-dock-bumper-450-x-265-x-125mm-concrete-loading-dock.jpg?v=1793872760"},{"product_id":"heavy-duty-dock-bumper-3","title":"Extra Tall Steel Dock Bumper 960 x 590 x 200mm with Free Fixings | Steel Hood, Rubber Core, 450mm Gusset | For HGV Trailers That Override","description":"\u003cp\u003e\u003cstrong\u003eWhen HGV trailers ride up over ordinary bumpers, this one stands about 560mm above the dock to stop them.\u003c\/strong\u003e It is an extremely large and robust dock bumper for bays where trailers override by a considerable height. Despite the steel construction it can still compress, because there is a rubber core behind the steel hood. The fixings are included free. It suits warehouse managers, site maintenance teams and loading bay installers with docks where smaller bumpers get overrun or destroyed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e960 x 590 x 200mm, weighing 85kg\u003c\/li\u003e\n\u003cli\u003eFree fixings included: nine M16 through-anchor studs and nine washers\u003c\/li\u003e\n\u003cli\u003eStands about 560mm above the dock and goes 400mm below it\u003c\/li\u003e\n\u003cli\u003eSteel hood over a conveyor belt rubber core\u003c\/li\u003e\n\u003cli\u003e450mm base plate and large gusset on top of the dock\u003c\/li\u003e\n\u003cli\u003eNine fixing holes, 20mm, taking M16 anchor bolts\u003c\/li\u003e\n\u003cli\u003eSold singly, and most doors use two\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/extra-tall-steel-dock-bumper-960-x-590-x-200mm-drawing-free-fixings.jpg?width=1200\" alt=\"Technical drawing of the extra tall steel dock bumper 960 x 590 x 200mm with face view, three lower holes, side view with hood and gusset, base plate with six holes, a photo of the bumper and free fixings\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy It Works\u003c\/h2\u003e\n\u003ch3\u003eMade for trailers that override\u003c\/h3\u003e\n\u003cp\u003eAir-suspended trailers can ride well above dock level, so a low bumper never gets touched and the trailer meets the building or the leveller instead. This bumper carries its steel face about 560mm above the dock top, so a high trailer still meets steel.\u003c\/p\u003e\n\u003ch3\u003eSteel outside, rubber core inside\u003c\/h3\u003e\n\u003cp\u003eSolid steel would pass the shock straight into your dock. Here a conveyor belt rubber core sits behind the 12.5mm steel hood, so compression is still possible and it absorbs impact while the steel takes the wear.\u003c\/p\u003e\n\u003ch3\u003eA big gusset to carry the load\u003c\/h3\u003e\n\u003cp\u003eA bumper this tall needs holding at the top. A large triangular gusset runs back to a 450mm base plate on the dock surface, with six of the nine fixing holes in it. So the load goes into the top of the dock as well as its face.\u003c\/p\u003e\n\u003ch3\u003eLoad figures\u003c\/h3\u003e\n\u003cp\u003eNo compression or load figure is published for this line. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere It's Used\u003c\/h2\u003e\n\u003cp\u003eThis bumper goes either side of a dock leveller or door opening, on bays that see trailers overriding: busy distribution centres, supermarket and parcel depots, and sites taking a wide mix of trailer heights. Before you order, check the door, its seals and any leveller frame clear a bumper standing about 560mm above the dock, and that there is 450mm of solid dock top behind the face.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne complete bumper: hood, rubber core, back plate, gusset and base plate, plus free fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e960 tall x 590 deep x 200mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e85kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel with a conveyor belt rubber core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbove the dock top\u003c\/th\u003e\n\u003ctd\u003eAbout 560mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBelow the dock top\u003c\/th\u003e\n\u003ctd\u003e400mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase plate on the dock\u003c\/th\u003e\n\u003ctd\u003e450mm long, with six 20mm holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLower plate on the dock face\u003c\/th\u003e\n\u003ctd\u003eThree 20mm holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eNine in all, taking M16 anchor bolts or studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003eAbout 137mm: 127mm plus the 10mm back plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHood plate\u003c\/th\u003e\n\u003ctd\u003e12.5mm steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixings\u003c\/th\u003e\n\u003ctd\u003eFree fixings included: 9 M16 through-anchor studs, 125 to 140mm long, and 9 washers (50mm OD, 16mm ID, 3mm thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eR_ISP535\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eDimensions are indicative. Check them against your dock before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eIs This the Right Bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers overriding by a considerable height\u003c\/td\u003e\n\u003ctd\u003eThis 960 x 590 x 200mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA smaller steel hood, about 280mm above the dock\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/steel-conveyor-belt-dock-bumper-730-x-280-x-140mm\"\u003e730 x 280 x 140mm bumper with a steel hood\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWider and shorter, with a steel front plate\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper\"\u003e620 x 360 x 140mm steel dock bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA low friction yellow face that slides with the trailer\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm sliding bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlain conveyor belt, no steel front\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-laminated-rubber-conveyor-900-x-400-x-95-mm\"\u003e900 x 400 x 105mm laminated bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eYou can also browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation, Use \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eAt 85kg this is a mechanical lift, so plan for it. Fit one each side of the dock opening, with the base plate flat on the dock top and the lower plate flat against the dock face. Sit it in place and mark through the holes before you drill, because the hole positions are not dimensioned. All nine holes are 20mm, and the free M16 through-anchor studs and washers are for fixing into sound concrete. Have a competent installer confirm that the wall and anchors suit the loads at your dock, because a bumper can only pass on what its fixing point can take.\u003c\/p\u003e\n\u003cp\u003eCheck the hood, bolts and fixings during routine bay inspections. This bumper protects against docking contact. It is not a vehicle restraint and does not replace wheel chocks or safe docking procedures.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per door?\u003c\/summary\u003e\u003cp\u003eMost bays use two, one either side of the opening. The price shown is for one bumper, so add two to your basket for a standard door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eYes. Free fixings are included with each bumper: nine M16 through-anchor studs, 125 to 140mm long, and nine washers (50mm OD, 16mm ID, 3mm thick), for fitting into sound concrete. That is one for each of the three holes in the lower plate and the six in the base plate.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy is it described as 590mm when it stands off the wall so much less?\u003c\/summary\u003e\u003cp\u003eThe 590mm is the whole depth from the front of the hood to the back of the base plate. The bumper stands only about 137mm off the wall. The rest sits on top of your dock, so allow for that 450mm on the dock surface.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it get in the way of my door?\u003c\/summary\u003e\u003cp\u003eIt can, because it stands about 560mm above the dock top. Check your door track, seals and leveller frame before you order, and call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it compress if it is steel?\u003c\/summary\u003e\u003cp\u003eYes. The rubber core behind the hood lets it compress under load, despite the steel construction.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering \u0026amp; Delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. Because of the weight, make sure someone is on site with suitable lifting equipment. For several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226193273219,"sku":"R_ISP535","price":948.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/extra-tall-steel-dock-bumper-960-x-590-x-200mm-concrete-loading-dock.jpg?v=1793830866"},{"product_id":"heavy-duty-dock-bumper-465-x-280-x-160-mm","title":"Deep Sliding Dock Bumper 465 x 280 x 160mm | No-Hole Yellow UHMWPE Face, Rubber Layers, Galvanised Steel Cradle | HGV Loading Bay","description":"\u003cp\u003e\u003cstrong\u003eWhen your bay needs a bumper that stands further off the wall, this one gives you 160mm.\u003c\/strong\u003e It has a large impact area with no holes in the UHMWPE face for the back of the truck to snag on, and the 50mm thick face can slide freely up and down in its galvanised steel cradle. Behind the face, two layers of rubber take the impact. Fix one each side of the dock leveller to protect your dock and the back of the trailer.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/deep-sliding-dock-bumper-465-x-280-x-160mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the deep sliding dock bumper 465 x 280 x 160mm with hole positions, end view and the yellow face lifted out of its galvanised steel cradle\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe face moves with the trailer.\u003c\/strong\u003e A trailer does not stay still at the dock. It sinks and rises on its suspension each time a forklift drives on and off. The faceplate slides within the steel cradle and adjusts with the movement of the vehicle, so much less of that movement becomes scraping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNothing on the face to catch.\u003c\/strong\u003e There are no bolt holes in the face, which leaves no edge for a trailer's frame to snag on. UHMWPE has a very low coefficient of friction, and it is known for its high impact resistance and durability. The yellow colour also gives a driver a clear reference point when reversing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRubber behind, steel around.\u003c\/strong\u003e Two rubber layers sit behind the face, and the galvanised steel cradle holds them all together and carries the load back into the dock wall through its fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplace the wearing part, not the whole unit.\u003c\/strong\u003e The yellow front can be changed if it shows signs of wear or damage, while the back plate stays bolted to the wall, with no new holes to drill.\u003c\/p\u003e\n\u003cp\u003eNo compression or load figure is published for this size. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThis type of bumper is fitted at distribution centres, manufacturing plants and goods-in bays taking articulated trailers, where the dock needs more stand-off than a standard bumper gives. It usually goes on the dock face either side of a dock leveller, and most bays need two.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne assembled bumper: yellow face, two rubber layers and galvanised steel cradle. Fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e465 x 280 x 160mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e37.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace\u003c\/th\u003e\n\u003ctd\u003eYellow UHMWPE, 450 x 250 x 50mm thick, no holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCradle back plate\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel, about 470 x 275 x 130mm, 21kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber layers\u003c\/th\u003e\n\u003ctd\u003eSBR and natural rubber blend, 70-75 Shore A, +\/- 5, -15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e4 through the back plate: 2 x 26mm at the top, 2 x 20mm at the bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003eAbout 350 x 145mm, top pair 60mm from the top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings needed\u003c\/th\u003e\n\u003ctd\u003e4 M16 through-anchor studs, 125 to 140mm long, and 2 washers, 50mm OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e160mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou need a sliding face and 160mm of stand-off\u003c\/td\u003e\n\u003ctd\u003eThis 465 x 280 x 160mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe same sliding idea with less depth\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm sliding bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA similar depth with more face area\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeep stand-off in plain rubber, with no steel cradle\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-extended-rubber-dock-bumper\"\u003e448 x 248 x 153mm extended bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe trailer must sit as close to the dock as possible\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/galvanized-steel-dock-bumper-470-x-270-x-66mm\"\u003e470 x 270 x 66mm low profile bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe cradle is damaged and the rest is sound\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-back-plate-470-x-275-x-130-mm\"\u003e470 x 275 x 130mm back plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBefore you order, measure your existing stand-off and check it against your dock leveller. A deeper bumper keeps the trailer further from the dock, so check that the leveller lip still reaches the trailer bed. Allow up to 470 x 280mm of flat, sound wall.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eThe fixing holes are in the back plate, so mark out from the drawing above, then offer the back plate up and check the holes against it before you drill. Fit to sound concrete using four M16 through-anchor studs and two washers. Set the height so the trailer's rear frame meets the face across its travel, and have a competent installer confirm that the wall and anchors suit the loads at your dock. At 37.5kg this is a two-person lift.\u003c\/p\u003e\n\u003cp\u003eCheck the face and fixings during routine bay inspections. A dock bumper protects the building and vehicle from routine docking contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow does the sliding work?\u003c\/summary\u003e\u003cp\u003eThe faceplate slides freely up and down within the steel cradle, allowing it to adjust with the movement of vehicles.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the face made of?\u003c\/summary\u003e\u003cp\u003eThe face is UHMWPE, known for its high impact resistance and durability, with a low friction surface and no holes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the front surface replaceable?\u003c\/summary\u003e\u003cp\u003eYes, the yellow front surface can be changed if it shows signs of wear or damage. Call 01744 520 110 or email us for a replacement.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo, because the right anchor depends on what you are fixing to. For sound concrete you need four M16 through-anchor studs, 125 to 140mm long, and two 50mm OD washers. If you are fixing to steelwork or an above dock bracket, call us before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per loading bay?\u003c\/summary\u003e\u003cp\u003eMost bays use two, one either side of the leveller. The price shown is for one bumper, so add a quantity of 2 for a standard bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I mount it above the dock?\u003c\/summary\u003e\u003cp\u003eThe two 26mm holes at the top of the back plate allow for M24 bolts to fix to an above dock angle bracket, if your bay requires one. The bracket is not part of this listing, so call us for advice.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page, normally two per door. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226193764739,"sku":"R_ISP551","price":601.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/deep-sliding-dock-bumper-yellow-face-concrete-loading-dock-wall.jpg?v=1793802111"},{"product_id":"heavy-duty-rubber-dock-bumper-2","title":"Low Friction Rubber Dock Bumper 450 x 250 x 115mm | Yellow UHMWPE Face Plate, SBR Rubber | HGV Loading Bay Buffer","description":"\u003cp\u003eWhen a trailer rises and sinks during loading, a plain rubber face grips it and drags. This 450 x 250 x 115mm dock bumper puts a thick yellow UHMWPE plate on the contact face, so the back of the trailer can slide along it, while the SBR rubber block behind takes the impact. It has much the same capability as a standard 450mm rubber bumper, with a low friction face added. Fix one each side of the dock leveller to protect your wall and the vehicle.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/low-friction-dock-bumper-450-x-250-x-115mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the low friction dock bumper 450 x 250 x 115mm with side, end and face views, hole positions and the yellow plate lifted off the rubber block\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a low friction face works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe trailer slides instead of grabbing.\u003c\/strong\u003e Ultra high molecular weight polyethylene has a low coefficient of friction. The plate is 35mm thick, which gives it plenty of material to wear through.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRubber still takes the knock.\u003c\/strong\u003e Behind the plate is a 100mm deep rubber block, in the same class as our standard 450mm bumpers. The plate sits 20mm into the rubber and stands 15mm proud of it, which is where the 115mm overall depth comes from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fixings sit below the surface.\u003c\/strong\u003e Each hole is 70mm wide for the first 80mm from the face, then 27mm through to the wall. The fixing head sits down inside the bumper, not on the face the trailer touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy for a driver to see.\u003c\/strong\u003e The yellow plate stands out against a grey dock wall, which helps when lining up in the mirrors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt as an assembly.\u003c\/strong\u003e The plate and the rubber block are separate parts, so if one is damaged it can be replaced without the other. Call us for a replacement part.\u003c\/p\u003e\n\u003cp\u003eNo load rating is published for this assembly. If your specification needs one, call us before you order.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it on the loading bays of distribution centres, parcel depots, factory despatch bays and merchant yards, wherever trailers sit against the bumpers while they are loaded and rise and sink as the weight changes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne assembled dock bumper. Fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003e450 x 250 x 115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront plate\u003c\/th\u003e\n\u003ctd\u003eYellow UHMWPE, 410 x 210 x 35mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber block\u003c\/th\u003e\n\u003ctd\u003eMoulded SBR and natural rubber blend, 100mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber hardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber service temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, on 250mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003e70mm wide and 80mm deep from the face, then 27mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers rise and sink against the bumper and you want a low friction face\u003c\/td\u003e\n\u003ctd\u003eThis 450 x 250 x 115mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA plain rubber bumper is enough\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a003\"\u003e450 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou need more stand-off from the wall\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-extended-rubber-dock-bumper\"\u003e448 x 248 x 153mm extended bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYou want the same low friction idea with more height\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe trailer must sit as close to the dock as possible\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/galvanized-steel-dock-bumper-470-x-270-x-66mm\"\u003e470 x 270 x 66mm low profile bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeveral doors, or spares to hold on site\u003c\/td\u003e\n\u003ctd\u003eCall us and we will go through the quantities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBefore you order, measure your existing stand-off and check it against your dock leveller. If other bumpers on the same dock stand further out, this one may not be touched first.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark out from the drawing above, then offer the bumper up and check the holes against it before you drill. Fix through both holes into sound concrete or structure, and have a competent installer confirm that the wall and anchors suit the loads at your dock. A bumper can only pass on what its fixing point can take.\u003c\/p\u003e\n\u003cp\u003eCheck the plate, rubber and fixings during your routine dock inspections, and replace a part once it is torn or worn back towards the fixing heads. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price shown is for one bumper. Most doors with a leveller use one each side, so add a quantity of 2 if you are protecting both sides of a bay.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo, because the right anchor depends on what you are fixing to. You need two fixings, mounted with standard bolts and anchors to suit your dock surface. The holes are 27mm through and open out to 70mm, so a 65mm OD washer fits the recess. Call us if you would like to talk through what you need.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it suitable for outdoor use?\u003c\/summary\u003e\u003cp\u003eYes, this bumper is designed for outdoor loading bays. The rubber has a service temperature of -15°C to 70°C.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the main benefit of a rubber dock bumper?\u003c\/summary\u003e\u003cp\u003eIt protects both the dock and the vehicle, reducing damage during loading and unloading. The yellow plate on this one also lets the trailer slide along the face.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I replace the plate on its own?\u003c\/summary\u003e\u003cp\u003eYes. The plate and the rubber block are separate parts. Call 01744 520 110 or email us for a replacement.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page, normally two per door. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226193961347,"sku":"R_ISP557","price":273.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/low-friction-rubber-dock-bumpers-yellow-face-pair-either-side-leveller.jpg?v=1793798409"},{"product_id":"premium-extended-rubber-dock-bumper","title":"Extended Rubber Dock Bumper 448 x 248 x 153mm | 150mm Projection, 2 Recessed Holes | HGV Loading Bay Protection","description":"\u003cp\u003e\u003cstrong\u003eWhen a standard bumper does not hold trailers far enough off your dock, this one does.\u003c\/strong\u003e This extended rubber dock bumper measures 448 x 248 x 153mm and gives you 150mm of projection, about half as much again as a standard 100mm bumper. It is one solid moulded block weighing 15kg, and it bolts on through two recessed holes, either to a steel back plate or into sound concrete. Choose it for loading bays where trailers need holding further from the dock or where a shallower bumper leaves the structure exposed. The price is for one bumper, and most doors need two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/extended-rubber-dock-bumper-448-x-248-x-153mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the 448 x 248 x 153mm extended rubber dock bumper with side, end and face views, hole sizes and packer stand-off\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this bumper works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e150mm of projection.\u003c\/strong\u003e The extra depth is the point of this bumper. A reversing trailer meets rubber sooner, so it stops further from your dock face than it would against a 100mm bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTested in a laboratory.\u003c\/strong\u003e In an independent compression test, this bumper took 7.2kN at about 20mm of compression, under a 100 x 51mm loading plate. Treat that as a comparison figure rather than a load rating. If your specification needs a rating, call us before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe bolts sit deep inside.\u003c\/strong\u003e Each hole is 75mm wide for the first 50mm, then 31mm through to the wall. The nut and washer sit down inside the recess, away from the face a trailer touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTapered, with a wide base.\u003c\/strong\u003e The block runs from a 448 x 248mm base on the wall to a 400 x 203mm face at the vehicle, on 254mm hole centres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoom to upgrade.\u003c\/strong\u003e The life of this bumper can be extended greatly with a steel front plate. Rubber packers behind it let you fine-tune the projection while it can still compress.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it on loading dock faces and dock levellers at warehouses, distribution centres and factory despatch bays, wherever trailers need to stop further from the structure than a standard bumper allows. Fit one each side of a door.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne rubber dock bumper. Fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e448 x 248 x 153mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFace size\u003c\/th\u003e\n\u003ctd\u003e400 x 203mm, tapering out to the base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand-off from wall\u003c\/th\u003e\n\u003ctd\u003e153mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSBR and natural rubber blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e3,000 psi, typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTear resistance\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, on 254mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole size\u003c\/th\u003e\n\u003ctd\u003e75mm wide and 50mm deep, then 31mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompression test\u003c\/th\u003e\n\u003ctd\u003e7.2kN at about 20mm, 100 x 51mm loading plate. Comparison figure only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical, as moulded rubber can vary slightly.\u003c\/p\u003e\n\u003ch2\u003eFixings you need\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOn a steel back plate:\u003c\/strong\u003e two M24 x 150mm studs, two M24 nuts and two 65mm OD washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInto sound concrete:\u003c\/strong\u003e use fixings that suit your wall and the 31mm through hole. Call us if you want advice on these before you order.\u003c\/p\u003e\n\u003ch2\u003eParts that fit\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/heavy-duty-dock-bumper-front-plate\"\u003e430 x 240 x 60mm steel front plate\u003c\/a\u003e, 15kg\u003c\/td\u003e\n\u003ctd\u003eSide cheeks make it much stronger than a flat plate, and the bumper behind compresses to absorb the impact. Takes a smaller M24 washer, so tell us if you fit one\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/heavy-duty-dock-bumper-back-plate-2\"\u003e460 x 255 x 15mm back plate\u003c\/a\u003e, 15kg\u003c\/td\u003e\n\u003ctd\u003eTwo M24 threaded holes to take this bumper. Bumpers and studs on a back plate are easier and quicker to replace than those fixed straight into concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a003\"\u003e10, 15, 20 and 50mm rubber packers\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eBring the stand-off out to 163, 168, 173 or 203mm. Choose them from the Size menu on that page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIs this the right bumper?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers need holding further off the dock\u003c\/td\u003e\n\u003ctd\u003eThis 448 x 248 x 153mm bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA standard dock wall and trailers that back in square\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a003\"\u003e450 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore height, or trailers that vary in height\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-a006\"\u003e600 x 250 x 108mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers riding under the bumper and pulling it off the wall\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003e750 x 250 x 100mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrailers rub up and down on the face\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm sliding bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark the two holes on 254mm centres, in line with the part of the trailer that reaches the dock first, then offer the bumper up and check before you drill. At 15kg, plan for two people. Have a competent installer confirm that the wall and anchors suit your dock, because a bumper can only pass on what its fixing point can take. A deeper bumper means trailers stop further from the dock, so check that your leveller lip can still reach the trailer bed.\u003c\/p\u003e\n\u003cp\u003eCheck the rubber and fixings during routine dock inspections, and replace the bumper once it is torn or worn back towards the nuts. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bumper or a pair?\u003c\/summary\u003e\u003cp\u003eThe price is for one bumper. Most doors use one on each side, so set the quantity to 2 for each door.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. For a steel back plate you need two M24 x 150mm studs, two nuts and two washers. For concrete, use fixings that suit your wall, or call us before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy 153mm if it has 150mm of projection?\u003c\/summary\u003e\u003cp\u003eThe block is 153mm deep as moulded and is described as having 150mm of projection. Moulded rubber can vary slightly, so measure before you rely on an exact stand-off.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need a back plate or front plate?\u003c\/summary\u003e\u003cp\u003eNeither is essential. A front plate can greatly extend the bumper's life on a busy door, and a back plate makes later replacement easier and quicker.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich way up does it fit?\u003c\/summary\u003e\u003cp\u003eThe usual way is upright, with the 448mm side running vertically and the two holes one above the other.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need and check out. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226194485635,"sku":"R_ISP571","price":123.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/extended-rubber-dock-bumper-448-x-248-x-153mm-hgv-loading-bay.jpg?v=1793790791"},{"product_id":"durable-back-plate-750-x-255-mm","title":"Steel Dock Bumper Back Plate - Mounting Plate for 750mm Loading Bay Bumpers, M24 Threaded, 750 x 255 x 15mm","description":"\u003cp\u003eA rubber dock bumper takes a beating from every trailer that reverses onto the bay, and sooner or later it has to come off. If it was anchored straight into the concrete, that means drilling out old fixings and making new holes in a dock face that is already cracked from years of impacts. This steel dock bumper back plate stops that cycle. It is a flat steel plate, 750mm long, 255mm wide and 15mm thick, about 24kg, finished in red oxide primer. You fix the plate to the dock once, then bolt the bumper to the plate through three M24 threaded holes. When the bumper wears out, you unbolt it and fit the new one in the same place.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eBumper changes without new holes\u003c\/h3\u003e\n\u003cp\u003eThe three M24 threaded holes run along the centre line of the plate at 275mm pitch, matching our 750mm rubber dock bumpers. Replacing a worn bumper becomes a spanner job: undo three bolts, offer up the new bumper, tighten. The wall fixings behind the plate are never disturbed, so the concrete is not weakened by repeated drilling and the bay is back in use quickly.\u003c\/p\u003e\n\u003ch3\u003ePlain steel, ready to weld\u003c\/h3\u003e\n\u003cp\u003eThe plate has no galvanised coating, which makes it better for welding to steel structures such as a steel dock edge, leveller frame or fabricated bumper mount. Galvanising has to be ground off before welding because it gives off zinc fumes; a primed plate avoids that step. It may arrive in red or grey oxide primer.\u003c\/p\u003e\n\u003ch3\u003eSix fixing holes for concrete or brackets\u003c\/h3\u003e\n\u003cp\u003eWhere the dock face is concrete, four 20mm holes and two 30mm holes let you anchor the plate firmly to the wall. The two larger holes at one end also allow the plate to be fitted with an angle bracket that carries it above the dock, useful where the bumper must sit higher than the dock edge.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteel, 750 x 255 x 15mm, about 24kg\u003c\/li\u003e\n\u003cli\u003e3 x M24 threaded holes for the bumper, 275mm pitch\u003c\/li\u003e\n\u003cli\u003e4 x 20mm and 2 x 30mm fixing holes\u003c\/li\u003e\n\u003cli\u003eNo galvanising, suited to welding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eBack plates are fitted on the front faces of raised loading docks at distribution centres, cold stores, parcel hubs, builders' merchants and factory goods-in bays, wherever HGV trailers reverse up to the dock door. They suit new docks being built with replaceable bumpers from the start, and older docks where the concrete around a bumper has broken up and needs a solid steel base. Fabricators also weld them to steel dock structures, leveller frames and bumper posts.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e255mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 24kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSteel, red oxide primer (may be supplied in red or grey oxide), not galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBumper holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e3 x M24 threaded, on the centre line, 550mm between outer holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4 x 20mm and 2 x 30mm, in pairs 145mm apart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750mm rubber dock bumpers with three M24 fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical and hole positions are indicative. Mark the wall from the plate itself rather than from the drawing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-back-plate-750x255x15-drawing.jpg?v=1794344963\" alt=\"Technical drawing of the 750 x 255 x 15mm steel dock bumper back plate showing the M24 threaded holes and fixing hole positions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eThis plate carries one 750mm bumper, so order one plate per bumper. It suits our \u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003e750 x 250 x 100mm rubber dock bumper\u003c\/a\u003e, which also offers rubber packers to bring the bumper further out from the wall, and the single \u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-250-x-750-x-100mm-extra-tall-hgv-loading-bay-impact-protector\"\u003e750 x 250 x 100mm heavy duty dock bumper\u003c\/a\u003e. Most docks fit a pair, one either side of the door.\u003c\/p\u003e\n\u003cp\u003eChoose this primed plate when it will be welded, or when you will paint it to match your dock. If you are unsure which plate suits your bumpers, send us a photo of the dock and the bumper and we will check.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFor concrete, hold the plate in position with the threaded holes on the vertical centre line of the bumper position and mark through the fixing holes. Drill and fix with M16 anchors suited to sound concrete, long enough to pass through the 15mm plate and embed fully. If you anchor through the two 30mm holes, use large outside-diameter washers so the washer covers the hole. For steel, weld the plate in place, then clean and paint the welds. Bolt the bumper on with M24 bolts long enough to engage the full 15mm thread. Check bolt tightness at routine dock inspections and touch up the paint where it is chipped.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with bolts?\u003c\/strong\u003e\u003cbr\u003eNo. Fixings are not included. You need M24 bolts for the bumper and anchors or welds for the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my existing 750mm bumper?\u003c\/strong\u003e\u003cbr\u003eIt fits 750mm rubber dock bumpers with three fixing holes on the centre line at 275mm pitch. Measure your bumper's hole centres, or send us a photo, before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I weld it?\u003c\/strong\u003e\u003cbr\u003eYes. It has no galvanised coating, so it is suited to welding to steel structures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the 30mm holes for?\u003c\/strong\u003e\u003cbr\u003eThey allow the plate to be fitted to an angle bracket that takes it above the dock edge. They can also take wall anchors with large washers.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder before 2pm Monday to Friday for same-day dispatch, with express delivery across the UK. For bulk orders, multiple docks or help choosing parts, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226194944387,"sku":"R_ISP579","price":262.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/red-oxide-back-plate-750x255x15-loading-dock.jpg?v=1794345222"},{"product_id":"heavy-duty-front-plate-for-dock-bumper","title":"UHMW-PE Dock Bumper Front Plate - Replaceable Low-Friction Wear Face for 750mm Loading Bay Bumpers, 710 x 210 x 35mm","description":"\u003cp\u003eOn a busy loading bay the dock bumper is not only hit, it is dragged. A trailer reverses on, then sinks and rises on its suspension as forklifts drive on and off, and the face of the bumper takes that rubbing all day. This yellow UHMW-PE front plate is the replaceable wear face for our \u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm low-friction dock bumper\u003c\/a\u003e. It measures 710 x 210 x 35mm, weighs about 4.5kg and has three 70mm holes at 275mm centres that line up with the bumper's fixing recesses. When the face is gouged or worn and the rubber behind it is still sound, change the plate and keep the rest of the bumper on the wall.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA slippery face takes the rubbing\u003c\/h3\u003e\n\u003cp\u003eUHMW-PE (ultra-high molecular weight polyethylene) is a tough plastic with a low-friction, wear-resistant surface. The trailer slides against it as it moves up and down, rather than gripping and tearing the rubber, so the rubber is left to do the cushioning it is there for.\u003c\/p\u003e\n\u003ch3\u003eHeld in the rubber, fixings out of reach\u003c\/h3\u003e\n\u003cp\u003eOn the bumper, the plate sits in a shallow pocket in the rubber face and stands 15mm proud, with a rubber rim around it. Its 70mm holes sit over 70mm recesses that run 80mm deep from the face, so the bolt heads are well below the surface a trailer touches.\u003c\/p\u003e\n\u003ch3\u003eReplace the part that wore, not the whole bumper\u003c\/h3\u003e\n\u003cp\u003eThe plate is the part that wears first. Buying it on its own costs far less than a complete bumper, and it uses the same holes already drilled in the dock wall, so there is no re-marking or new anchors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYellow UHMW-PE, 710 x 210 x 35mm, about 4.5kg\u003c\/li\u003e\n\u003cli\u003eThree 70mm holes at 275mm centres, 80mm in from each end\u003c\/li\u003e\n\u003cli\u003eLow-friction face protects the rubber from dragging\u003c\/li\u003e\n\u003cli\u003eFits the 750 x 250 x 115mm plated dock bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThese plates are fitted to loading bay bumpers at distribution centres, parcel hubs, food and drink warehouses, factories, builders' merchants and goods-in doors, wherever trailers dock at a raised bay and stay on the bumper while they are loaded. Site and maintenance teams keep one or two on the shelf so a damaged face can be changed during a planned dock inspection instead of waiting on a new bumper.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOne yellow UHMW-PE front plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 710 x 210 x 35mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 4.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eUHMW-PE (ultra-high molecular weight polyethylene), yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHoles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e3 x 70mm, in a line at 275mm centres, 80mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750 x 250 x 115mm low-friction dock bumper (rubber body 100mm deep, plate 15mm proud)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eNot included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eRubber bumper body, bolts and anchors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. If you are matching an older bumper from another source, measure its pocket and hole centres and call us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-front-plate-710x210x35-technical-drawing.jpg?v=1794344971\u0026amp;width=1200\" alt=\"Technical drawing of the 710 x 210 x 35mm UHMW-PE dock bumper front plate with hole centres and fitted side view\" width=\"1200\" loading=\"lazy\" style=\"margin:20px 0;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose this plate when the yellow face is worn, gouged or split and the rubber body is still sound. If the rubber is torn or perished, replace the rubber element or the complete bumper instead; all three are on the \u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm dock bumper\u003c\/a\u003e page. Most bays run two bumpers, one each side of the leveller, and both faces usually wear at a similar rate, so many sites change them as a pair to keep the trailer landing evenly.\u003c\/p\u003e\n\u003cp\u003eCheck the size before you order. This plate is 710mm long with holes at 275mm centres. Other bumpers in our range, such as the 450mm and 760mm models, use different plates.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eClose the bay and isolate the leveller before you start. Remove the worn plate from the pocket in the rubber face, clean out the pocket and check the rubber and the fixings at the bottom of each recess, tightening or replacing any that have loosened. Seat the new plate with its three holes over the recesses and press it fully home so it stands evenly proud of the rim. At 4.5kg one person can handle it. If an old plate is stuck fast or the rubber around it is split, change the complete bumper instead. Check the plates during routine dock inspections and replace them before they wear through to the rubber.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my dock bumper?\u003c\/strong\u003e\u003cbr\u003eIt fits our 750 x 250 x 115mm low-friction dock bumper, which has a 710 x 210mm pocket and three holes at 275mm centres. If your bumper came from elsewhere, measure the pocket and hole centres first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre bolts included?\u003c\/strong\u003e\u003cbr\u003eNo. The plate does not take its own bolts; it sits in the bumper's face over the existing fixing recesses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one plate?\u003c\/strong\u003e\u003cbr\u003eYes, the price is for a single front plate weighing about 4.5kg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is UHMW-PE?\u003c\/strong\u003e\u003cbr\u003eUltra-high molecular weight polyethylene, a tough, slippery plastic that resists wear, so trailers slide over it rather than dragging the rubber.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For several doors or a stock of spares, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through the parts with you.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195108227,"sku":"R_ISP581","price":161.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-front-plate-710x210x35-loading-bay.jpg?v=1794344971"},{"product_id":"premium-durable-front-plate-1","title":"Dock Bumper Front Plate - Yellow UHMWPE Low Friction Replacement Face for Loading Bays, 410 x 210 x 35mm","description":"\u003cp\u003eOn a busy loading bay the face of a dock bumper takes the full rub of every trailer that backs on, then rises and sinks as pallets go on and off. This yellow UHMWPE front plate is the wear face for our \u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-2\"\u003e450 x 250 x 115mm low friction rubber dock bumper\u003c\/a\u003e. It measures 410 x 210mm, is 35mm thick and weighs about 2.5kg, with two 70mm holes on 250mm centres that line up with the fixing recesses in the rubber block behind. When the old face is scored, split or worn thin, swap in a new plate and keep the rubber block you already have.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eTrailers slide on it instead of dragging\u003c\/h3\u003e\n\u003cp\u003eUltra high molecular weight polyethylene has a low coefficient of friction. As a trailer settles under load, its rear frame slides along the plate rather than gripping and dragging on bare rubber, which is what tears plain bumpers and pulls at their fixings.\u003c\/p\u003e\n\u003ch3\u003e35mm of material to wear through\u003c\/h3\u003e\n\u003cp\u003eThe plate is a solid 35mm thick slab. On the bumper it sits 20mm into a pocket in the rubber and stands 15mm proud, so the trailer only ever touches the plastic face while the rubber behind it takes the impact.\u003c\/p\u003e\n\u003ch3\u003eHoles that keep the fixings clear of the trailer\u003c\/h3\u003e\n\u003cp\u003eThe two 70mm holes run straight through the plate and sit over the recessed fixing holes in the rubber. That leaves room for a socket and washer to reach the wall fixings, and keeps every bolt head below the face the vehicle meets.\u003c\/p\u003e\n\u003ch3\u003eEasy to see when reversing\u003c\/h3\u003e\n\u003cp\u003eBright yellow stands out against a grey dock wall and a dark rubber block, which helps drivers line up in their mirrors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYellow UHMWPE, 410 x 210 x 35mm, about 2.5kg\u003c\/li\u003e\n\u003cli\u003eTwo 70mm through holes on 250mm centres\u003c\/li\u003e\n\u003cli\u003eLow friction face, trailers slide rather than grab\u003c\/li\u003e\n\u003cli\u003eReplaces the face on the 450 x 250 x 115mm bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eReplacement faces are fitted on the loading bays of distribution centres, parcel and grocery depots, factory despatch bays, cold stores and builders' merchants, anywhere a 450mm low friction bumper sits either side of a dock leveller. Site maintenance teams keep one or two on the shelf so a damaged face can be changed during a planned dock inspection instead of waiting for a whole new bumper.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOne front plate. Rubber block and fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e410 x 210 x 35mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eAbout 2.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eUHMWPE (ultra high molecular weight polyethylene), yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHoles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eTwo, 70mm diameter, straight through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHole centres\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e250mm, on the long centre line, 80mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e450 x 250 x 115mm low friction dock bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003ePosition on the bumper\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e20mm into the rubber, 15mm proud of it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/uhmwpe-dock-bumper-front-plate-410-x-210-x-35mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the yellow UHMWPE dock bumper front plate 410 x 210 x 35mm with face, side and end views, two 70mm holes on 250mm centres\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"padding:10px; border:1px solid #dee2e6; text-align:left;\"\u003eYour situation\u003c\/th\u003e\n\u003cth style=\"padding:10px; border:1px solid #dee2e6; text-align:left;\"\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eThe yellow face on a 450mm low friction bumper is worn or split\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eThis 410 x 210 x 35mm plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eThe rubber block behind the plate is torn\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003ca href=\"\/products\/heavy-duty-dock-bumper-accessory\"\u003e445 x 250 x 100mm rubber element\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eYou need the whole bumper, plate and rubber together\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-2\"\u003e450 x 250 x 115mm low friction bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eYour bumpers are the taller 750mm low friction type\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003ca href=\"\/products\/heavy-duty-front-plate-for-dock-bumper\"\u003e710 x 210 x 35mm front plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure your old plate before ordering. If it is not 410 x 210mm with two large holes 250mm apart, call us with the sizes and we will find the right face.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eTake the bumper off the wall by removing the two fixings through the 70mm holes. Lift the worn plate out of its pocket in the rubber, clean out any grit, then seat the new plate with its holes over the recesses in the rubber. Refit the bumper with fixings to suit your wall, and have a competent installer confirm that the wall and anchors suit the loads at your dock. If your old plate is held in a way that is not obvious, call us before you start.\u003c\/p\u003e\n\u003cp\u003eCheck plates during routine dock inspections and change one once it is cracked, split, or worn back towards the fixing heads. A dock bumper protects the building and the vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my dock bumper?\u003c\/strong\u003e\u003cbr\u003eIt is the face for the 450 x 250 x 115mm low friction bumper with a yellow plate and two large holes. Check that your old plate is 410 x 210 x 35mm with holes 250mm apart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with fixings or the rubber block?\u003c\/strong\u003e\u003cbr\u003eNo. The price is for the plate only. The rubber element and the complete bumper are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are the holes so large?\u003c\/strong\u003e\u003cbr\u003eThe 70mm holes sit over the recesses in the rubber so a socket and washer can reach the wall fixings, and the bolt heads stay below the face the trailer touches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one plate?\u003c\/strong\u003e\u003cbr\u003eYes, one plate. Most doors have a bumper each side, so order two to re-face both sides of a bay.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For several doors or a whole site, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195140995,"sku":"R_ISP583","price":168.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/uhmwpe-dock-bumper-front-plate-on-loading-bay-bumper-with-trailer.jpg?v=1794345057"},{"product_id":"heavy-duty-dock-bumper-745-x-250-x-100mm","title":"Dock Bumper Rubber Element 745 x 250 x 100mm - Replacement Loading Bay Buffer Body for 750mm Yellow Face Bumper","description":"\u003cp\u003eThis is the replacement rubber body for our \u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003e750 x 250 x 115mm low friction dock bumper with yellow UHMWPE face\u003c\/a\u003e. It is the black SBR rubber block that sits behind the yellow plate and takes the energy every time a trailer backs onto the dock. When the rubber is split, torn at the fixing holes or squashed flat after years of heavy traffic, you can swap just this part, re-use the face plate if it is still sound, and keep the dock in service without buying a complete bumper. It measures 745mm long, 250mm wide and 100mm deep and weighs about 17kg.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eSolid rubber that takes the hit\u003c\/h3\u003e\n\u003cp\u003eThe body is a solid moulding in SBR rubber, 100mm deep. That depth of rubber compresses as a trailer makes contact and recovers when it pulls away, so the load reaching the dock face, the leveller lip and the trailer's rear bar is cushioned rather than passed straight into concrete and steel.\u003c\/p\u003e\n\u003ch3\u003eA pocket that locates the face plate\u003c\/h3\u003e\n\u003cp\u003eThe front face has a raised rubber rim round a shallow pocket. The 710 x 210 x 35mm yellow UHMWPE plate drops into that pocket, so it is held on all four sides and cannot slide out of line, and the finished bumper stands 115mm off the wall. The rim also stops trailer edges catching the end of the plate.\u003c\/p\u003e\n\u003ch3\u003eCounterbored holes keep bolts out of the way\u003c\/h3\u003e\n\u003cp\u003eThree holes run through the body on 275mm centres. Each has a 70mm counterbore from the face and a 25mm bore through to the wall, so bolt heads and washers sit deep inside the rubber, well behind the face plate and clear of the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement SBR rubber body, 745 x 250 x 100mm, about 17kg\u003c\/li\u003e\n\u003cli\u003ePocket in the face takes the 710 x 210 x 35mm yellow front plate\u003c\/li\u003e\n\u003cli\u003e3 fixing holes on 275mm centres, 70mm counterbore, 25mm through\u003c\/li\u003e\n\u003cli\u003eSame hole pattern as the complete bumper, so existing wall fixings line up\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eIt goes back onto raised loading docks at distribution centres, warehouses, cold stores, factories and retail service yards, wherever the 750mm yellow-faced bumper is fitted either side of a dock door at trailer bed height. Site maintenance teams and facilities managers keep one or two in stores so a damaged bumper can be changed the same day instead of leaving a dock door out of use.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e745mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e100mm (115mm with the face plate fitted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eService temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e-15°C to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e3, on 275mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHole detail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e70mm counterbore from the face, 25mm through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750 x 250 x 115mm dock bumper with 710 x 210 x 35mm UHMWPE face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eRubber body only. Face plate and fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Moulded rubber can vary slightly between batches, so if an exact size is critical, call us before ordering and we will check current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-element-745-drawing.jpg?v=1794344971\" alt=\"Technical drawing of the 745 x 250 x 100mm dock bumper rubber element with side, face and end views and hole sizes\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eCheck what has actually failed. If the rubber is split, torn round a fixing hole or no longer recovers its shape, order this rubber element and re-use your face plate. If the yellow face is worn thin or cracked but the rubber is sound, order the \u003ca href=\"\/products\/heavy-duty-front-plate-for-dock-bumper\"\u003e710 x 210 x 35mm UHMWPE front plate\u003c\/a\u003e on its own. If both are worn, or you are fitting a new dock, the \u003ca href=\"\/products\/sbr-rubber-dock-bumper-750-x-250-x-115mm\"\u003ecomplete 750mm low friction bumper\u003c\/a\u003e comes with fixings and works out simpler.\u003c\/p\u003e\n\u003cp\u003eThis body only suits the 750mm yellow-faced bumper. For a plain rubber bumper without a face plate, see our \u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003e750 x 250 x 100mm rubber dock bumper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eTake the old bumper off the wall and lift the face plate out of its pocket. Check the existing anchors: if they are sound and still on 275mm centres they can be re-used, otherwise drill new ones through the holes of the new body. The 25mm holes suit heavy-duty anchors or bolts up to M24. Seat the face plate in the pocket of the new body, offer the assembly up with two people, as it weighs about 17kg before the plate, and tighten the fixings evenly so the rubber is held flat against the wall without being crushed. Look the bumpers over during routine yard checks and change the rubber before splits reach the fixing holes.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes this include the yellow face plate?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the rubber body only. The face plate is sold separately, or re-use your existing one.\u003c\/p\u003e\n\u003ch3\u003eAre fixings included?\u003c\/h3\u003e\n\u003cp\u003eNo. Most sites re-use their existing wall anchors. The holes are 25mm, so they take fixings up to M24.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my existing bumper?\u003c\/h3\u003e\n\u003cp\u003eIt fits the 750 x 250 x 115mm bumper with a 710 x 210 x 35mm yellow face. If yours is a different size, send us the measurements and we will match it.\u003c\/p\u003e\n\u003ch3\u003eWhy is it 745mm and not 750mm?\u003c\/h3\u003e\n\u003cp\u003eThe rubber body on its own measures 745mm. The complete bumper is quoted at 750mm overall.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eIn stock for same-day dispatch on orders placed before 2pm, Monday to Friday, with express UK delivery. For bulk quantities, spares for several docks or help matching an existing bumper, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195239299,"sku":"R_ISP585","price":138.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-element-745-dock-face.jpg?v=1794345098"},{"product_id":"heavy-duty-dock-bumper-accessory","title":"Dock Bumper Rubber Element 445 x 250 x 100mm - Replacement SBR Buffer Block for Low Friction Loading Bay Bumper","description":"\u003cp\u003eThis is the rubber block that sits behind the yellow face plate on our \u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-2\"\u003e450 x 250 x 115mm low friction dock bumper\u003c\/a\u003e. When that bumper has taken years of trailers reversing onto the dock, the rubber is usually the part that splits or crumbles first, while the plastic face still has life in it. Replace the block on its own, refit your existing plate, and the bay is protected again for a fraction of the cost of a new assembly. It is a moulded black SBR rubber element, 445mm long, 250mm wide and 100mm deep, weighing about 10kg, with two counterbored fixing holes at 250mm centres.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eThe rubber takes the impact\u003c\/h3\u003e\n\u003cp\u003eEvery time a trailer backs onto the dock, the 100mm depth of solid rubber compresses and absorbs the knock that would otherwise go into the dock wall, the leveller and the back of the vehicle. The plate on the front only gives the trailer a slippery surface; the rubber does the cushioning, which is why it is the part that wears out.\u003c\/p\u003e\n\u003ch3\u003eA pocket that locates the face plate\u003c\/h3\u003e\n\u003cp\u003eThe front face has a shallow pocket with a raised rubber rim all round it. The 410 x 210 x 35mm face plate drops into that pocket, so the rim holds it square and stops it shifting sideways when a trailer rises and sinks against it during loading. Small stud holes in the pocket floor take the studding that holds the plate in.\u003c\/p\u003e\n\u003ch3\u003eFixing heads below the face\u003c\/h3\u003e\n\u003cp\u003eEach fixing hole is 27mm through with a 70mm counterbore, so the bolt head and washer sit down inside the rubber, well behind the face.\u003c\/p\u003e\n\u003ch3\u003eSame footprint, same holes\u003c\/h3\u003e\n\u003cp\u003eThe holes sit on the long centre line at 250mm centres, the same as the original, so a like-for-like replacement goes straight back onto your existing wall fixings in most cases.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMoulded SBR rubber, 445 x 250 x 100mm, about 10kg\u003c\/li\u003e\n\u003cli\u003eTwo 27mm holes at 250mm centres, 70mm counterbores\u003c\/li\u003e\n\u003cli\u003ePocket with raised rim to locate a 410 x 210mm face plate\u003c\/li\u003e\n\u003cli\u003eSlightly tapered sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eIt is fitted to the loading bays of distribution centres, parcel and pallet hubs, food and drink depots, factory despatch bays and builders' merchants, one bumper either side of the dock leveller. Facilities and maintenance teams keep a spare on the shelf so a damaged bumper can be rebuilt the same day, without waiting for a whole new assembly or leaving a bay out of use.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOne rubber element. Face plate and fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e445 x 250 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 10kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e70-75 Shore A, +\/- 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eService temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e-15°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2 x 27mm through, at 250mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eCounterbores\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e70mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eTakes face plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e410 x 210 x 35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e450 x 250 x 115mm low friction dock bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLoad rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-rubber-element-445x250x100-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the dock bumper rubber element 445 x 250 x 100mm with front face, side section, 250mm hole centres, 70mm counterbores and 27mm holes\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"padding:10px; border:1px solid #dee2e6; text-align:left;\"\u003eYour situation\u003c\/th\u003e\n\u003cth style=\"padding:10px; border:1px solid #dee2e6; text-align:left;\"\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eThe rubber is split or worn but the yellow plate is sound\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eThis rubber element\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eThe yellow plate is worn or broken\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003ca href=\"\/products\/premium-durable-front-plate-1\"\u003e410 x 210 x 35mm face plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eBoth parts are damaged, or it is a new bay\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-2\"\u003eComplete 450 x 250 x 115mm bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eYour bumper is the taller 750mm low friction model\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003ca href=\"\/products\/heavy-duty-dock-bumper-745-x-250-x-100mm\"\u003e745 x 250 x 100mm rubber element\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure your old block before ordering. If it is 445 x 250mm with two holes 250mm apart, this is the right part.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eTake the face plate out of the old block and undo the two wall fixings. Offer the new element up with the pocket facing out, check the holes line up with the existing fixings, then refit through both counterbores into sound concrete or steel. Where the old fixings are corroded or loose, drill fresh and have a competent installer confirm the anchors suit the wall and the loads at your dock. Seat the face plate in the pocket and secure it with its studding.\u003c\/p\u003e\n\u003cp\u003eLook at the rubber, plate and fixings during routine dock inspections. Replace the rubber once it is torn, cracked or compressed back towards the fixing heads. A dock bumper protects the building and vehicle from routine contact; it is not a vehicle restraint.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes it come with the yellow face plate?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the rubber part only, for refitting your existing plate. The plate is sold separately, and so is the complete bumper.\u003c\/p\u003e\n\u003ch3\u003eAre fixings included?\u003c\/h3\u003e\n\u003cp\u003eNo. You need two wall fixings suited to your dock surface. The 27mm holes take fixings up to M24, and the 70mm counterbore leaves room for the head and a washer.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my bumper?\u003c\/h3\u003e\n\u003cp\u003eIt fits the 450 x 250 x 115mm low friction bumper with a 410 x 210mm yellow plate. If your old rubber measures 445 x 250 x 100mm with holes 250mm apart, it is a direct swap.\u003c\/p\u003e\n\u003ch3\u003eCan it be used outdoors?\u003c\/h3\u003e\n\u003cp\u003eYes. It is made for outdoor loading bays, with a service temperature of -15°C to 70°C.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need at the top of the page. Orders placed before 2pm, Monday to Friday, are dispatched the same day by Express UK Delivery. For several bays or spares for a whole site, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195272067,"sku":"R_ISP587","price":112.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-rubber-element-445x250x100-loading-dock.jpg?v=1794345054"},{"product_id":"premium-durable-front-plate","title":"Rubber Dock Bumper Front Plate - Replacement Wearing Face for Shallow Loading Bay Bumpers, 745 x 246 x 55mm","description":"\u003cp\u003eThe rubber face of a shallow dock bumper takes every trailer that reverses onto the bay, so it is the part that wears. This replacement front plate lets you renew that face without drilling out the steel or buying a whole new bumper. It is a solid black SBR rubber moulding, 745mm long, 246mm wide and 55mm thick, weighing about 12.5kg, with a 14mm flange along each long edge that slides into the galvanised steel back plate. It is the rubber face for our \u003ca href=\"\/products\/shallow-dock-bumper-765-x-270-x-66mm\"\u003e765 x 270 x 66mm shallow dock bumper\u003c\/a\u003e, and warehouse, distribution and facilities teams keep spares on the shelf so a worn bay is back to full protection in minutes.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eReplace the face, keep the steel\u003c\/h3\u003e\n\u003cp\u003eThe galvanised back plate is anchored into the dock wall and is built to last for years. The rubber in front of it is designed to be sacrificial. When the face is cut, gouged or worn thin by trailer rear frames, you lift it out and slide a new one in. The anchors stay in the wall, the steel stays in place, and the cost is a fraction of a full bumper.\u003c\/p\u003e\n\u003ch3\u003eNo bolts through the wearing face\u003c\/h3\u003e\n\u003cp\u003eThe plate has no holes at all. It is held by its two 14mm edge flanges, which sit behind the folded lips down each side of the back plate. Nothing metal shows on the 223mm wide raised face, so there are no bolt heads for a trailer to catch and nothing to work loose under repeated impacts.\u003c\/p\u003e\n\u003ch3\u003eA low 66mm profile that lets trailers close in\u003c\/h3\u003e\n\u003cp\u003eFitted in its back plate, this plate makes up a bumper only about 66mm deep. That lets the vehicle back in close to the dock, keeping the gap to the dock leveller short while still putting solid rubber between the trailer and the concrete.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid SBR rubber, 745 x 246 x 55mm, about 12.5kg\u003c\/li\u003e\n\u003cli\u003e223mm wide raised face, 14mm flanges on both long edges\u003c\/li\u003e\n\u003cli\u003eSlides into the 760 x 270mm galvanised back plate, no holes\u003c\/li\u003e\n\u003cli\u003eSame size as the face supplied on our 765mm shallow bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eIt is fitted on raised loading docks at distribution centres, parcel hubs, food and drink warehouses, builders' merchants, manufacturing plants and retail service yards, one bumper either side of each dock door at trailer height. Sites with several bays usually hold a few spare plates so a damaged face can be swapped during a shift change rather than waiting for a contractor.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e745mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e246mm overall, 223mm across the raised face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e55mm overall, flanges 14mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 12.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSBR rubber, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSlides into the galvanised back plate, no holes in the face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e760 x 270 x 35mm back plate of the 765 x 270 x 66mm shallow dock bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eRubber hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e70-75 Shore A (rubber spec for this dock bumper range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eService temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e-15 to +70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSupplied\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eFront plate only, back plate and anchors not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Moulded rubber can vary slightly between batches, so if an exact size is critical, call us before ordering and we will check current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-front-plate-745-x-246-x-55mm-technical-drawing.jpg?v=1794345043\" alt=\"Technical drawing of the 745 x 246 x 55mm rubber dock bumper front plate with front, end and side view dimensions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the steel back plate on the wall before you order. This plate suits the 760mm tall, 270mm wide galvanised back plate with folded side lips. For the shorter 465mm shallow bumper, a different plate is needed.\u003c\/p\u003e\n\u003cp\u003eRubber is the lower cost face and grips well against trailer frames. Where trailers slide up and down against the bumper as they load, for example on air-suspension trailers, a low friction plastic face lasts longer; our \u003ca href=\"\/products\/heavy-duty-dock-bumper-front-panel\"\u003eyellow UHMWPE dock bumper front plate\u003c\/a\u003e fits the same type of back plate. If you need the complete unit with the back plate and anchors, choose the \u003ca href=\"\/products\/shallow-dock-bumper-765-x-270-x-66mm\"\u003eshallow dock bumper\u003c\/a\u003e itself.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eClose the bay and keep vehicles clear. Pull the worn plate up out of the back plate, using a bar under the bottom edge if it has bedded in. Brush grit and debris out of the steel channel, then lower the new plate in from the top with its flanges behind the side lips and the 223mm face pointing out to the yard. At about 12.5kg it is a two-person lift at height. Check bumpers at routine site inspections and replace the face once it is cut through or worn towards the steel.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need bolts or anchors?\u003c\/strong\u003e\u003cbr\u003eNo. The plate has no holes; it is held by its edge flanges inside the galvanised back plate, which is the part anchored to the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich bumper does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is the rubber face for the 765 x 270 x 66mm shallow dock bumper with a 760 x 270mm galvanised back plate. It does not fit the 465mm version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the back plate included?\u003c\/strong\u003e\u003cbr\u003eNo, this is the front plate only. Buy the complete shallow dock bumper if you need the steel as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRubber or UHMWPE?\u003c\/strong\u003e\u003cbr\u003eRubber costs less and suits most bays. UHMWPE slides better where trailers move up and down against the bumper while loading.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. The price is for one front plate weighing about 12.5kg. For several bays or multi-site orders, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195337603,"sku":"R_ISP589","price":151.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-dock-bumper-front-plate-745-x-246-x-55mm-fitted-loading-dock.jpg?v=1794345043"},{"product_id":"dock-bumper-back-plate","title":"Galvanised Steel Dock Bumper Back Plate - Replacement Cradle for Sliding Loading Bay Bumpers, 760 x 270 x 130mm","description":"\u003cp\u003eA sliding dock bumper only works as long as the steel cradle behind it stays straight and firmly fixed. This galvanised steel dock bumper back plate is that cradle: a deep U-shaped channel 760mm tall, 270mm wide and 130mm deep, weighing about 32kg, with six fixing holes through the back and a closed lower end. It bolts upright to the face of a loading dock and holds the rubber blocks and the yellow sliding face of our \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm rubber and steel dock bumper\u003c\/a\u003e. Use it to replace a bent or corroded cradle.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA deep channel that holds the whole bumper\u003c\/h3\u003e\n\u003cp\u003eThe 130mm deep side walls wrap round the stacked rubber blocks and the 50mm thick face, so the bumper sits inside steel rather than hanging off the wall on its own bolts. A trailer's impact passes through the rubber into the back of the channel and on into the wall.\u003c\/p\u003e\n\u003ch3\u003eClosed at the bottom, open at the top\u003c\/h3\u003e\n\u003cp\u003eA steel end plate closes the lower end of the channel and carries the weight of the rubber and face from below. The top is left open, so a worn face can be lifted out and a new one dropped in without unbolting the cradle from the wall.\u003c\/p\u003e\n\u003ch3\u003eGalvanised for an open yard\u003c\/h3\u003e\n\u003cp\u003eDocks are wet, salted in winter and scraped by reversing trailers. Galvanising protects the steel inside and out, so the cradle outlasts the faces fitted in front of it.\u003c\/p\u003e\n\u003ch3\u003eSix holes in three pairs\u003c\/h3\u003e\n\u003cp\u003eTwo 20mm holes halfway down and two at the bottom fix the plate to the dock wall. The top pair are 26mm, so M24 bolts can also tie the plate into an angle bracket above the dock where one is fitted.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanised steel channel, 760 x 270 x 130mm, about 32kg\u003c\/li\u003e\n\u003cli\u003eClosed lower end, open top for changing the face\u003c\/li\u003e\n\u003cli\u003eSix fixing holes at 145mm centres across the plate\u003c\/li\u003e\n\u003cli\u003eTop pair 26mm, middle and bottom pairs 20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThis plate is fitted on the faces of raised loading docks at distribution centres, parcel hubs, cold stores, food and drink depots, builders' merchants and factory goods-in bays, one either side of each dock door at trailer bed height. Facilities teams order it on its own when a cradle is bent or rusted, or when a new dock door is added and the plates go up first.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e760 x 270 x 130mm (height x width x depth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 32kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eU-shaped channel, open front, closed lower end, open top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e6, in 3 pairs at 145mm centres across the plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eTop pair\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e26mm, 55mm down from the top, for M24 bolts to an above-dock angle bracket if required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMiddle and bottom pairs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e20mm, halfway down and near the closed end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOur 760 x 275 x 165mm rubber and steel dock bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSupplied as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOne back plate. Rubber blocks, face and fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-760x270x130-drawing.jpg?v=1794344949\" alt=\"Technical drawing of the galvanised dock bumper back plate 760 x 270 x 130mm with six fixing holes\" style=\"max-width:100%; height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure your old cradle before ordering. This plate is the 130mm deep version that takes the deeper 165mm bumper. If your cradle is 85mm deep, you need the \u003ca href=\"\/products\/heavy-duty-dock-bumper-back-plate-5\"\u003e760 x 270 x 85mm back plate\u003c\/a\u003e instead. If the plate is sound and only the face is worn, replace the face: the standard \u003ca href=\"\/products\/heavy-duty-dock-bumper-front-panel\"\u003e750 x 250 x 50mm yellow UHMW-PE face\u003c\/a\u003e slides straight in, and the \u003ca href=\"\/products\/deep-sliding-dock-bumper-face-750-x-250-x-100mm\"\u003e100mm deep face\u003c\/a\u003e brings the bumper 50mm further out from the dock. For a new dock position, order the \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003ecomplete bumper\u003c\/a\u003e, which comes with this plate already in the assembly.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eAt 32kg, the plate is a two-person lift. Hold it upright against the dock face with the closed end at the bottom and the open front facing the yard, level it and mark through the holes. The complete bumper is normally fixed with six M16 through-stud anchors, 125 to 140mm long, and two heavy 50mm washers; choose anchors that suit your concrete or brickwork. Tighten evenly, then slide the rubber blocks and face down into the channel from the top. Check the anchors and the face at routine inspections, and replace the face before it wears down towards the steel.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the rubber and the yellow face?\u003c\/strong\u003e\u003cbr\u003eNo. This listing is for the galvanised back plate only. The rubber blocks and face come with the complete bumper, and the face is also sold on its own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003cbr\u003eNo. Order anchors or bolts to suit the wall. The middle and bottom holes are 20mm and the top pair are 26mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit a shallower 110mm bumper?\u003c\/strong\u003e\u003cbr\u003eNo. The 760 x 270 x 110mm bumper uses the 85mm deep plate. This 130mm deep plate is for the 760 x 275 x 165mm bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the face without taking the plate off the wall?\u003c\/strong\u003e\u003cbr\u003eYes. The top of the channel is open, so a worn face lifts out and a new one drops in while the plate stays fixed.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. The price is for one back plate weighing about 32kg. For several dock doors or a site refit, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195698051,"sku":"R_ISP595","price":354.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-760x270x130-loading-dock.jpg?v=1794345315"},{"product_id":"heavy-duty-dock-bumper-back-plate-5","title":"Galvanised Steel Dock Bumper Back Plate 760 x 270 x 85mm | 6 Fixing Holes | Replacement Cradle for Sliding Dock Bumper","description":"\u003cp\u003eIf a heavy knock has bent the steel cradle of a sliding dock bumper, you do not have to replace the whole unit. This galvanised back plate is that cradle, sold on its own. It measures 760 x 270 x 85mm, weighs 26kg and has six fixing holes, so you can replace a damaged plate on an existing bumper, or start a new bay with the steel fixed first and add the face later.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-760-x-270-x-85mm-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the galvanised dock bumper back plate 760 x 270 x 85mm with six hole positions, 150mm across and 325mm apart, and an end view\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this back plate works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSix holes for a secure fit.\u003c\/strong\u003e The holes run in three pairs down the plate, 325mm apart and 150mm across, so the load is spread along its full length. The first and last pairs sit 55mm from each end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTop holes for an over-dock bracket.\u003c\/strong\u003e The top pair are larger, at 26mm, and suit M24 screws into an angle bracket above the dock, if your wall needs one. The middle and bottom pairs are 20mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for an open yard.\u003c\/strong\u003e Heavy duty galvanised steel gives long-lasting performance in harsh environments such as an exposed loading bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA channel that holds the face.\u003c\/strong\u003e Returns along both long edges hold the face and rubber in place, and the closed lower end stops them dropping out. The top is open, so the face can be lifted out and a new one dropped in.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThis is the back plate from our \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm sliding dock bumper\u003c\/a\u003e, used at distribution centres, parcel depots, food and drink goods-in and factory despatch bays.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne back plate. The face, rubber and fixings are not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e760 x 270 x 85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eSix: top pair 26mm, middle and bottom pairs 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e150mm across, 325mm down, 55mm from each end, 60mm in from the side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLower end\u003c\/th\u003e\n\u003ctd\u003eClosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne back plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published. The load capacity depends on the installation method and the dock structure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right part\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe steel cradle only, for a 110mm deep sliding bumper\u003c\/td\u003e\n\u003ctd\u003eThis back plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe complete bumper, with face, rubber and free fixings\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm sliding dock bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA new yellow face for this cradle\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-dock-bumper-front-panel\"\u003e750 x 250 x 50mm front plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe deeper cradle, for a 165mm bumper\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/dock-bumper-back-plate\"\u003e760 x 270 x 130mm back plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA shorter cradle\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-dock-bumper-back-plate-3\"\u003e470 x 275 x 80mm back plate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eReplacing a plate on an existing bumper? Check the overall size and hole positions against your old plate before you order, and call us if you are not sure which cradle you have.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eFit it with the closed end at the bottom. Mark out from the drawing above, then offer the plate up and check the holes against it before you drill. You will need a drill, suitable fixings and a wrench. On our complete bumper we use six M16 through-anchors of 125 to 140mm into sound concrete, and M24 bolts where the top holes go into an angle bracket. Have a competent installer confirm that the wall and fixings suit the loads at your dock.\u003c\/p\u003e\n\u003cp\u003eCheck the plate and fixings during routine dock inspections, and replace the plate if it is bent or the returns no longer hold the face. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the weight capacity of the back plate?\u003c\/summary\u003e\u003cp\u003eThe plate itself weighs 26kg. The load capacity depends on the installation method and the dock structure, and no load figure is published for this part.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it with other dock bumpers?\u003c\/summary\u003e\u003cp\u003eIt is made for our 760 x 270 x 110mm sliding bumper. It can suit another face or bumper if the size and mounting are compatible, so check those first or call us.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the face and fixings included?\u003c\/summary\u003e\u003cp\u003eNo, this is the steel back plate only. For everything in one order, choose the complete 760 x 270 x 110mm bumper, which includes free fixings.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhy are the top two holes larger?\u003c\/summary\u003e\u003cp\u003eThey are 26mm so that M24 screws can go through into an angle bracket above the dock, if your wall needs one.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it heavy to fit?\u003c\/summary\u003e\u003cp\u003eAt 26kg, plan for two people to hold it while you mark out and fix it.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need above. For a delivery date, a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195730819,"sku":"R_ISP597","price":320.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-760-x-270-x-85mm-concrete-loading-dock.jpg?v=1793887641"},{"product_id":"heavy-duty-dock-bumper-back-plate-4","title":"Galvanised Dock Bumper Back Plate - Loading Bay Wall Mounting Plate with 3 x M24 Threaded Holes, 750 x 255 x 15mm","description":"\u003cp\u003eA dock bumper bolted straight into concrete is easy to fit once and hard to change ever after. Anchors seize, holes crumble and every replacement means drilling a dock face that has already taken years of trailer strikes. This galvanised steel back plate solves that. It is fixed to the loading bay wall once, and the bumper bolts onto it through three M24 threaded holes, so a worn bumper can be unbolted and a new one fitted in minutes without touching the concrete again. The plate is 750mm long, 255mm wide and 15mm thick, weighs about 24kg and is made for 750mm dock bumpers.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eThreads in the plate, not anchors in the wall\u003c\/h3\u003e\n\u003cp\u003eThe three M24 holes are tapped straight into the 15mm steel. The bumper bolts screw into the plate, so the wall fixings never have to come out when the bumper is changed. That keeps the dock face sound and turns a drilling job into a spanner job.\u003c\/p\u003e\n\u003ch3\u003eHole spacing that matches 750mm bumpers\u003c\/h3\u003e\n\u003cp\u003eThe M24 holes sit on the centre line at 550mm outer centres, with the middle hole halfway between. That is the same pattern as 750mm rubber dock bumpers with three holes 275mm apart and 100mm in from each end, so the bumper lines up with the plate without re-drilling.\u003c\/p\u003e\n\u003ch3\u003eSix separate holes for the wall\u003c\/h3\u003e\n\u003cp\u003eThe plate fixes to the dock through four 20mm clearance holes and two 30mm holes, set on two rows 145mm apart, 655mm between the outer centres. The bumper covers them once fitted, so the wall fixings sit behind the rubber, away from the trailer.\u003c\/p\u003e\n\u003ch3\u003eGalvanised for an open yard\u003c\/h3\u003e\n\u003cp\u003eLoading bays are wet and salted in winter. The galvanised finish keeps rust off where paint would chip away.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanised steel, 750 x 255 x 15mm, about 24kg\u003c\/li\u003e\n\u003cli\u003e3 x M24 threaded holes for the bumper, 550mm outer centres\u003c\/li\u003e\n\u003cli\u003e4 x 20mm and 2 x 30mm holes for fixing to the wall\u003c\/li\u003e\n\u003cli\u003eChange bumpers without drilling the dock again\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eIt goes behind dock bumpers on the face of raised loading docks at distribution centres, warehouses, cold stores, factories, retail service yards and parcel hubs, either side of each dock door. It suits new docks, and old docks where the concrete around the original anchors has broken up.\u003c\/p\u003e\n\u003cp\u003eIt is made for 750mm bumpers such as our \u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003eheavy duty rubber dock bumper 750 x 250 x 100mm\u003c\/a\u003e, and it also carries the \u003ca href=\"\/products\/cast-nylon-dock-bumper-750-x-250-x-50mm\"\u003ecast nylon dock bumper 750 x 250 x 50mm\u003c\/a\u003e with its rubber packer.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e255mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 24kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBumper holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e3 x M24 threaded, on the centre line, 550mm outer centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWall fixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4 x 20mm and 2 x 30mm, rows 145mm apart, 655mm outer centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750mm dock bumpers with 3 holes on 275mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBumper and fixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. If an exact hole position is critical, call us before ordering and we will check current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-750x255x15-drawing.jpg?v=1794345101\" alt=\"Technical drawing of the 750 x 255 x 15mm galvanised dock bumper back plate showing M24 bumper holes and wall fixing holes\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eOrder one plate for each bumper. Most docks take two bumpers, one each side of the door, so two plates per dock is usual. Before ordering, measure your bumper: it should be 750mm long with three fixing holes on its centre line, 275mm apart. If yours is a different length or hole pattern, call us with the measurements and we will match a plate to it.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eAt 24kg the plate is a two-person lift. Stand it upright with the two 30mm holes at the top, at the height where trailer beds meet the dock, and mark the wall through the fixing holes. Fix it to sound concrete with M16 anchors through the 20mm holes and the 30mm holes; on the top pair, use large washers of about 50mm outside diameter to cover the bigger holes. The 30mm holes also leave room to fit the plate on an angle bracket where it has to stand above the dock edge. Then hold the bumper in place and screw M24 bolts through it into the threads, long enough for the bumper you are fitting. Check the bolts at routine inspections.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bumper or fixings?\u003c\/strong\u003e\u003cbr\u003eNo. The plate is supplied on its own. Choose anchors for your wall and M24 bolts to suit your bumper, or call us and we will advise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my existing 750mm bumper?\u003c\/strong\u003e\u003cbr\u003eIt will if the bumper has three holes on its centre line, 275mm apart and about 100mm in from each end. Measure your bumper's hole centres before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are two of the holes larger?\u003c\/strong\u003e\u003cbr\u003eThe two 30mm holes at the top end give room to fit the plate with an angle bracket above the dock. When fixing flat to a wall, cover them with large washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. It is galvanised steel, made for open loading bays in all weathers.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrders placed before 2pm Monday to Friday are dispatched the same day, with express delivery across the UK. For quantities for several docks or help matching a plate to an existing bumper, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195861891,"sku":"R_ISP599","price":261.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-fitted-loading-dock-lead.jpg?v=1794345101"},{"product_id":"dock-bumper-back-plate-470-x-275-x-130-mm","title":"Galvanised Dock Bumper Back Plate - Steel Cradle for Deep Sliding Loading Bay Buffers, 470 x 275 x 130mm","description":"\u003cp\u003eA deep sliding dock bumper is only as strong as the steel that holds it to the wall. This galvanised steel dock bumper back plate is that steel: a folded cradle, 470mm tall, 275mm wide and 130mm deep, weighing 21kg, that bolts flat to the face of a loading dock and carries the rubber layers and plastic face of the bumper inside it. It is the replacement back plate for our \u003ca href=\"\/products\/heavy-duty-dock-bumper-465-x-280-x-160-mm\"\u003edeep sliding dock bumper 465 x 280 x 160mm\u003c\/a\u003e, for when a cradle has been bent by a misjudged reverse, corroded on an old dock, or is needed for a new bay.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA cradle, not a flat plate\u003c\/h3\u003e\n\u003cp\u003eThe plate is folded into an open-fronted channel. Two side walls stand 130mm out from the wall, with a narrow lip turned in along each front edge, and the lower end is closed. The bumper drops in from the open top, rests on the closed end and is held between the side walls and lips, so the load from a trailer is spread through the whole cradle into the wall instead of through a few bolts.\u003c\/p\u003e\n\u003ch3\u003eGalvanised for an open yard\u003c\/h3\u003e\n\u003cp\u003eLoading dock faces get rain, road spray, salt and diesel. A galvanised finish protects the steel inside and out, so the cradle stays sound behind the bumper for years on an exposed bay.\u003c\/p\u003e\n\u003ch3\u003eFour holes set for a dock wall\u003c\/h3\u003e\n\u003cp\u003eThe back of the cradle has four holes in two pairs, 145mm apart across the plate and 350mm apart down it, each 60mm in from the end. The top pair are 26mm, which allows M24 bolts into an angle bracket above the dock if your installation uses one. The bottom pair are 20mm for fixing into the dock face.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanised steel cradle, 470 x 275 x 130mm, 21kg\u003c\/li\u003e\n\u003cli\u003eOpen top, open front, closed lower end\u003c\/li\u003e\n\u003cli\u003eInward lips along both side walls\u003c\/li\u003e\n\u003cli\u003eTwo 26mm and two 20mm fixing holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThis back plate is fitted to the vertical face of raised loading docks at distribution centres, cold stores, manufacturing sites, builders' merchants and parcel hubs, one either side of the dock leveller or door at trailer bed height. It is also used where a damaged cradle needs replacing during a dock refurbishment, or where a site is adding bays and wants every bumper on the same deep sliding pattern.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e470mm tall x 275mm wide x 130mm deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e21kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eShape\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eFolded channel cradle with inward lips, open top, closed lower end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4: top pair 26mm, bottom pair 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHole centres\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e145mm across, 350mm down, 60mm from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eDeep sliding dock bumper 465 x 280 x 160mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSold as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOne back plate. Bumper, face and fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. If an exact size is critical to an existing installation, call us before ordering and we will check one from stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-470-x-275-x-130mm-technical-drawing.jpg?v=1794345080\" alt=\"Technical drawing of the galvanised dock bumper back plate 470 x 275 x 130mm with hole sizes, hole centres and end view\" width=\"1200\" loading=\"lazy\" style=\"max-width:100%; height:auto; margin:16px 0;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the bumper you need to hold before you order. This cradle is made for the 465 x 280 x 160mm deep sliding dock bumper, and the complete bumper on our store already comes with its own back plate, so you only need this part on its own to replace a damaged cradle or to keep a spare for a busy bay. If your existing back plate is a different size, compare its height, width, depth and hole centres with the drawing above, or send us a photo and the measurements and we will match it.\u003c\/p\u003e\n\u003cp\u003eMost docks have two bumpers per door, and a trailer that hits one hard usually marks the other, so it is worth checking both cradles when you replace one.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eLift the old bumper out of its cradle, unbolt the damaged plate and clean the wall behind it. Hold the new cradle upright against the dock face, open end at the top, at the same height as the trailer beds it meets, and mark through the holes. Use heavy-duty anchors suited to the concrete and sized for the 20mm holes, and M24 bolts through the 26mm holes if you are fixing to an angle bracket above the dock. The plate weighs 21kg, so have a second person hold it while the first fixings go in. Drop the rubber layers and face back in from the top. Check the fixings at routine dock inspections and replace the cradle if the side walls are bent out of line.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the bumper?\u003c\/strong\u003e\u003cbr\u003eNo. The price is for one galvanised back plate only. The rubber layers, plastic face and fixings are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich bumper does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is the back plate for our deep sliding dock bumper 465 x 280 x 160mm. For other bumpers, compare the drawing with your existing plate or call us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fixings do I need?\u003c\/strong\u003e\u003cbr\u003eThe top holes are 26mm, which allow M24 bolts into an angle bracket. The bottom holes are 20mm for anchors into the dock wall. Choose anchors rated for the concrete you are fixing to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable outdoors?\u003c\/strong\u003e\u003cbr\u003eYes. It is galvanised steel, made for the open face of a loading dock.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. At 21kg the plate ships as a heavy parcel. For several bays, a full set of bumpers or help matching an older cradle, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226195992963,"sku":"R_ISP601","price":320.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-fitted-loading-dock-yellow-face.jpg?v=1794345190"},{"product_id":"heavy-duty-dock-bumper-back-plate-3","title":"Galvanised Dock Bumper Back Plate - Steel Wall Cradle for Sliding Loading Bay Bumpers, 470 x 275 x 80mm","description":"\u003cp\u003eA sliding dock bumper is only as good as the steel that holds it to the dock. This galvanised dock bumper back plate is that steel: a 470 x 275 x 80mm cradle that bolts flat to the face of a loading dock and carries the rubber packer and sliding face of our \u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm sliding dock bumper\u003c\/a\u003e. It weighs about 16.5kg, has four fixing holes through a 12mm base, and is finished in galvanised steel to stand up to rain, yard grit and constant trailer contact.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA channel that holds the bumper in place\u003c\/h3\u003e\n\u003cp\u003eThe plate is folded into a shallow channel. Two side walls stand 80mm out from the dock face along the full 470mm length, and each one turns inward at the front in a narrow lip. The bumper sits between those walls and behind the lips, so it is held at the sides and the front rather than relying on bolts through the rubber. The bottom end is closed and the top end is open, which is how the sliding bumper is located in its cradle.\u003c\/p\u003e\n\u003ch3\u003eFixings that stay behind the bumper\u003c\/h3\u003e\n\u003cp\u003eAll four holes go through the flat base of the channel, 65mm in from each side and at 350mm vertical centres, so once the bumper is fitted the bolt heads sit behind it and away from the trailer. The top pair are 26mm, sized for M24 bolts where the plate is also tied to an angle bracket above the dock edge. The bottom pair are 20mm.\u003c\/p\u003e\n\u003ch3\u003eGalvanised steel for an outdoor job\u003c\/h3\u003e\n\u003cp\u003eLoading dock faces are wet, salted in winter and hit every day. A galvanised finish protects the steel inside and out, including the folded edges and the lips, so rust does not creep in behind the bumper where it cannot be seen.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e470 x 275 x 80mm galvanised steel cradle, about 16.5kg\u003c\/li\u003e\n\u003cli\u003eSide walls with inward lips, closed bottom end, open top\u003c\/li\u003e\n\u003cli\u003e4 fixing holes at 350 x 145mm centres\u003c\/li\u003e\n\u003cli\u003eTop pair 26mm (M24), bottom pair 20mm\u003c\/li\u003e\n\u003cli\u003eCarries our 465 x 275 x 110mm sliding dock bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThis back plate is fitted to the vertical concrete face of raised loading docks at distribution centres, cold stores, manufacturing sites, parcel hubs and goods-in yards, usually one each side of the dock door at trailer bed height. Site and maintenance teams order it to replace a damaged cradle without changing the whole bumper, to fit a new bay alongside existing sliding bumpers, or to keep a spare in stores so a bay is not left unprotected after a heavy strike.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e470mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e275mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e80mm, with inward lips on both side walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBase\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 16.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4, at 350mm vertical and 145mm horizontal centres, 65mm in from each side, top pair 55mm from the top edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHole sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eTop pair 26mm (M24), bottom pair 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e465 x 275 x 110mm sliding dock bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSteel grade and coating thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Fabricated steel can vary slightly between batches, so if an exact size is critical, call us before ordering and we will check current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-470x275x80-technical-drawing.jpg?v=1794344981\" alt=\"Technical drawing of the 470 x 275 x 80mm galvanised dock bumper back plate with front, end and side views and hole positions\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMatch the cradle to the bumper it will carry. This plate is the 470 x 275 x 80mm cradle for the 465 x 275 x 110mm sliding dock bumper; if you need the complete unit, order the \u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003esliding dock bumper\u003c\/a\u003e instead. Other dock bumpers use different back plates: a 760mm bumper needs a 760mm plate, and a shallow 66mm bumper uses a 35mm deep plate. If replacing an old cradle, check its hole centres against the drawing above.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eHold the plate against the dock face with the closed end at the bottom and the open end at the top, check it is plumb, and mark through all four holes. Drill and fix with anchors suited to your concrete and to the hole sizes, long enough to pass through the 12mm base and embed properly. If the dock has an angle bracket above the edge, use the 26mm top holes with M24 bolts to tie the plate to it. Tighten evenly, then fit the bumper into the channel. Check the fixings at routine inspections, especially after a hard strike, and replace the plate if the side walls or lips are bent out of line.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich dock bumper does this back plate fit?\u003c\/strong\u003e\u003cbr\u003eIt is the cradle for the 465 x 275 x 110mm sliding dock bumper with a yellow face and rubber packer. It is not sized for 760mm bumpers or the shallow 66mm bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the rubber bumper?\u003c\/strong\u003e\u003cbr\u003eNo. The price is for one galvanised back plate only. The complete bumper is sold on its own listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fixings does it need?\u003c\/strong\u003e\u003cbr\u003eThe top holes are 26mm and suit M24 bolts; the bottom holes are 20mm. Fixings are not included, so choose anchors to suit the dock wall.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For several bays, multi-site orders or help matching an existing cradle, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226196091267,"sku":"R_ISP603","price":229.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-cradle-fitted-loading-dock.jpg?v=1794345107"},{"product_id":"heavy-duty-dock-bumper-back-plate-2","title":"Dock Bumper Back Plate - Galvanised Steel Mounting Plate for 450mm Loading Bay Rubber Buffers, 460 x 255 x 15mm","description":"\u003cp\u003eA dock bumper bolted straight into concrete is fine until it wears out. Then the old anchors have to be cut out, the concrete re-drilled and the new bumper fixed into a face that is already cracked and spalled. This galvanised steel dock bumper back plate stops that cycle. The plate is anchored to the loading dock once, and the rubber bumper bolts into two threaded holes on its face, so a worn or damaged bumper can be swapped in minutes without touching the concrete. It measures 460 x 255 x 15mm, weighs about 15kg and suits 450mm rubber dock bumpers used on loading bays, warehouse doors and goods-in docks.\u003c\/p\u003e\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eThreaded holes, so the bumper changes without drilling\u003c\/h3\u003e\n\u003cp\u003eTwo M24 threaded holes at 250mm centres take the bumper's bolts directly. When the rubber is worn, undo two bolts, lift the old bumper off and bolt the new one on. The anchors that hold the plate to the dock stay where they are, and the concrete is never drilled again.\u003c\/p\u003e\n\u003ch3\u003eSpreads the load into the dock face\u003c\/h3\u003e\n\u003cp\u003eEvery trailer that reverses onto a dock drives the bumper back into the wall. A 15mm steel plate behind the rubber spreads that load over a 460 x 255mm area instead of concentrating it on two anchor points, which helps protect older or damaged dock edges.\u003c\/p\u003e\n\u003ch3\u003eGalvanised for an outdoor dock\u003c\/h3\u003e\n\u003cp\u003eLoading docks are wet, salted in winter and open to the yard. The plate is galvanised steel, with a zinc coating that protects it from rain and road spray far longer than bare or painted mild steel.\u003c\/p\u003e\n\u003ch3\u003eFour wall fixing holes\u003c\/h3\u003e\n\u003cp\u003eTwo 20mm holes at one end and two 29mm holes at the other, at 350mm centres, fix the plate to the dock. The larger holes also allow the plate to be fitted with an angle bracket, so it can sit above the dock edge where the face below is not suitable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanised steel, 460 x 255 x 15mm, about 15kg\u003c\/li\u003e\n\u003cli\u003e2 x M24 threaded holes at 250mm centres for the bumper\u003c\/li\u003e\n\u003cli\u003e2 x 20mm and 2 x 29mm wall fixing holes at 350mm centres\u003c\/li\u003e\n\u003cli\u003eSwap worn bumpers without re-drilling the concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eBack plates are fitted on the faces of raised loading docks either side of each dock door, at distribution centres, cold stores, parcel hubs, builders' merchants, manufacturing plants and retail goods-in bays. They are especially useful on busy docks where bumpers are replaced regularly, on older docks whose concrete has been weakened by previous fixings, and on new builds where the site wants quick bumper changes from day one.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e460 x 255 x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSteel, galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBumper fixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2 x M24 threaded holes, 250mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWall fixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2 x 20mm and 2 x 29mm, 350mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e450mm rubber dock bumpers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSupplied as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOne back plate, bumper not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-back-plate-460x255x15-drawing_c435ee12-0a33-400e-9169-c814ca62b3d3.jpg?v=1794345088\" alt=\"Dock bumper back plate technical drawing, 460 x 255 x 15mm galvanised steel with M24 threaded holes at 250mm centres\" style=\"max-width:100%; height:auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eYou need one back plate per bumper. Most dock doors have a bumper each side, so a pair of plates per door is usual. This plate is made for 450mm long rubber dock bumpers, such as our \u003ca href=\"\/products\/dock-bumper-a003\"\u003estandard rubber dock bumper 450 x 250 x 100mm\u003c\/a\u003e and the \u003ca href=\"\/products\/premium-extended-rubber-dock-bumper\"\u003eextended rubber dock bumper 448 x 248 x 153mm\u003c\/a\u003e. Check the bumper's bolt holes are at 250mm centres before ordering. For 750mm bumpers, choose a longer plate to match.\u003c\/p\u003e\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eHold the plate in position on the dock face with the threaded holes level with the bumper's holes, and mark through the four wall fixing holes. On sound concrete, M16 x 125mm anchors suit the holes; fit large diameter M16 washers over the 29mm holes so the washer covers the hole. Fix the plate first, then offer the bumper up and bolt it into the two M24 threaded holes. Check the bumper bolts at routine dock inspections, and replace the bumper when it is worn, leaving the plate in place.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a bumper or fixings?\u003c\/strong\u003e\u003cbr\u003eNo. The price is for one galvanised back plate. The bumper, bumper bolts and wall anchors are bought separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich bumpers does it fit?\u003c\/strong\u003e\u003cbr\u003e450mm long rubber dock bumpers with two bolt holes at 250mm centres, which take M24 bolts into the plate's threaded holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are two of the wall holes larger?\u003c\/strong\u003e\u003cbr\u003eThe 29mm holes allow the plate to be fitted with an angle bracket, so it can be mounted above the dock edge. Use large washers to cover them when fixing direct to the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for outdoor docks?\u003c\/strong\u003e\u003cbr\u003eYes. The plate is galvanised steel, made for use on open loading bays.\u003c\/p\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. Each plate weighs about 15kg. For several doors or multi-site orders, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226196222339,"sku":"R_ISP605","price":197.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-back-plate-460x255x15-fitting-bumper.jpg?v=1794345088"},{"product_id":"heavy-duty-dock-bumper-back-plate-1","title":"Dock Bumper Back Plate 460 x 270 x 35mm - Galvanised Steel Holder for Slide-In Rubber or UHMWPE Loading Bay Faces","description":"\u003cp\u003eA dock bumper takes a knock every time a trailer reverses onto the bay, and the part that takes it is the face. This galvanised steel back plate is the permanent half of a two-part dock bumper: it is anchored to the dock wall once, and a 50mm rubber or yellow UHMWPE face slides down into it. When the face wears, you lift it out and drop a new one in, with no new holes in the concrete. The plate measures 460 x 270 x 35mm, weighs about 14kg and has four countersunk fixing holes, so the anchor heads finish flush and never touch the face or the trailer.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eFolded returns hold the face\u003c\/h3\u003e\n\u003cp\u003eBoth long edges of the plate are folded forward into returns that grip the edges of the face. A welded stop bar closes the bottom end, so the face slides in from the open top and comes to rest on the bar. Nothing has to be bolted through the face, which is why a worn face can be changed in minutes.\u003c\/p\u003e\n\u003ch3\u003eGalvanised for the yard\u003c\/h3\u003e\n\u003cp\u003eThe whole plate is galvanised steel, the usual protective finish for steelwork that lives outdoors in rain, wash-down and yard grit. It is a structural part that stays on the wall for the life of the bay while faces come and go.\u003c\/p\u003e\n\u003ch3\u003eFlush countersunk fixings\u003c\/h3\u003e\n\u003cp\u003eThe four holes are 16mm through with a 30mm countersink, set 145mm apart across the plate and 350mm apart along it. Countersunk anchor heads sit level with the steel, so the face slides over them cleanly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanised steel, 460 x 270 x 35mm, about 14kg\u003c\/li\u003e\n\u003cli\u003eReturns on both long edges, stop bar at one end\u003c\/li\u003e\n\u003cli\u003eFour countersunk holes, 16mm through, 30mm countersink\u003c\/li\u003e\n\u003cli\u003eTakes a 450mm rubber or UHMWPE face, 50mm thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThe plate is fitted to the front face of raised loading docks either side of the door, to dock levellers and lip plates, to the steel frames of loading bays and to walls and columns along goods-in routes where trailers back up close. It suits distribution centres, cold stores, parcel hubs, builders' merchants and factories where the same bays are used all day, and replacement faces are cheaper than replacing a whole moulded bumper.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e460mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e270mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 14kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eGalvanised steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4, countersunk: 16mm through, 30mm countersink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHole centres\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e145mm across, 350mm along, first pair 60mm from the open end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSuits fixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e4 x M10 x 100 countersunk anchor bolts, 16mm drill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFaces it takes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eRubber 450 x 245 x 50mm or UHMWPE 450 x 250 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings and face\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included, back plate only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Check the hole positions against the plate itself before drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-460x270x35-technical-drawing.jpg?v=1794345038\" alt=\"Technical drawing of the 460 x 270 x 35mm galvanised dock bumper back plate with front, end and side views and hole positions\" width=\"1200\" loading=\"lazy\" style=\"margin:20px 0;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eThis listing is the back plate on its own, for a new bay where you are choosing the face separately or for replacing a bent or corroded plate on an existing bumper. Two faces fit it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/premium-rubber-front-plate-for-dock-bumpers\"\u003eBlack rubber front plate, 450 x 245 x 50mm\u003c\/a\u003e: tough, performs well under compression and suits general bays.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/premium-dock-bumper-front-plate-1\"\u003eYellow UHMWPE front plate, 450 x 250 x 50mm\u003c\/a\u003e: highly visible with a low friction face, so a trailer that rises or drops as it is loaded slides along it instead of dragging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you want plate and face together, the complete \u003ca href=\"\/products\/shallow-dock-bumper-465-x-270-x-66mm\"\u003eshallow dock bumper with a rubber face\u003c\/a\u003e and \u003ca href=\"\/products\/galvanized-steel-dock-bumper-470-x-270-x-66mm\"\u003elow profile dock bumper with a UHMWPE face\u003c\/a\u003e are both built on this same plate. Most bays take one bumper either side of the door.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFit the plate long side vertical with the stop bar at the bottom and the open end at the top. Hold it at trailer bumper height, mark through the four holes, drill 16mm into sound concrete and fix with M10 x 100 countersunk anchors, tightening until the heads sit flush. Slide the face down between the returns until it rests on the stop bar. Check the face at routine inspections and change it once it is worn, cracked or torn; check the anchors are still tight at the same time.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a face?\u003c\/strong\u003e\u003cbr\u003eNo. This is the galvanised back plate only. Choose a rubber or UHMWPE face from the links above, or buy a complete bumper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fixings does it need?\u003c\/strong\u003e\u003cbr\u003eFour M10 x 100 countersunk anchor bolts in 16mm holes. Fixings are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I change the face without removing the plate?\u003c\/strong\u003e\u003cbr\u003eYes. The face lifts out of the open top end and a new one slides in, so the plate and its anchors stay in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it replace the plate on my existing bumper?\u003c\/strong\u003e\u003cbr\u003eIt will if your face is about 450mm long and 245 to 250mm wide. Measure the face and the hole positions on the old plate before ordering, or call us and we will check.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. The price is for one back plate. For a full set of bays or a multi-site order, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226196353411,"sku":"R_ISP607","price":165.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-dock-bumper-back-plate-460x270x35-yellow-uhmwpe-face-loading-dock.jpg?v=1794345414"},{"product_id":"heavy-duty-dock-bumper-back-plate","title":"Dock Bumper Back Plate - Weldable Steel Mounting Plate for 450mm Loading Bay Bumpers, M24 Threaded, 460 x 255 x 15mm","description":"\u003cp\u003eA rubber dock bumper bolted straight into a concrete wall works until the day it needs replacing. Then the old anchors have to be cut out and fresh holes drilled into concrete that has already taken years of trailer impacts. This dock bumper back plate fixes that. It is a flat 15mm mild steel plate, 460 x 255mm, weighing about 15kg, that fixes to the loading bay once and carries the bumper on two M24 threaded holes. When the rubber wears out, you undo two bolts and fit a new one. The plate has no galvanised coating, so it can also be welded straight onto a steel dock leveller or dock frame.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eReplace the bumper, not the fixings\u003c\/h3\u003e\n\u003cp\u003eThe bumper bolts into the plate, not into the wall. Swapping a worn bumper becomes a quick spanner job at ground level. The wall fixings stay put and the concrete is not disturbed again.\u003c\/p\u003e\n\u003ch3\u003eThreaded holes, no loose nuts behind\u003c\/h3\u003e\n\u003cp\u003eThe two bumper holes are tapped M24 and sit 250mm apart on the centre line. Bolts or studs screw directly into the 15mm steel, so there is nothing to hold behind the plate. Once the plate is on the wall, the bumper can be fitted or removed from the front.\u003c\/p\u003e\n\u003ch3\u003eWeld it or bolt it\u003c\/h3\u003e\n\u003cp\u003eThe plate is supplied in oxide primer, not galvanised, so it welds cleanly to steel. Four separate fixing holes, two 20mm and two 29mm at 350mm centres, let you bolt it to a concrete dock face instead. The larger 29mm holes are there so the plate can also sit on an angle bracket that lifts the bumper above dock height.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e15mm mild steel, 460 x 255mm, about 15kg\u003c\/li\u003e\n\u003cli\u003e2 x M24 threaded holes at 250mm centres for the bumper\u003c\/li\u003e\n\u003cli\u003e2 x 20mm and 2 x 29mm fixing holes at 350mm centres\u003c\/li\u003e\n\u003cli\u003eOxide primer finish, no galvanising, suitable for welding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eBack plates are fitted on raised loading docks at distribution centres, cold stores, factories and goods-in yards, one either side of each dock door. They suit steel dock leveller lips and dock frames, where they are welded in place, and concrete dock faces, where they are anchored. Sites that change bumpers often, or that run articulated trailers all day, gain the most because every later bumper change is quicker.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e460 x 255 x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eMild steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eRed or grey oxide primer, not galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBumper holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2 x M24 threaded, 250mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e2 x 20mm and 2 x 29mm, 350mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e450mm rubber dock bumpers with 2 holes at 250mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. If an exact size is critical, call us before ordering and we will check current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-back-plate-460x255x15-drawing.jpg?v=1794345021\" alt=\"Technical drawing of the 460 x 255 x 15mm dock bumper back plate showing M24 threaded holes at 250mm centres and fixing holes at 350mm centres\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eThis plate is made for 450mm rubber dock bumpers with two fixing holes at 250mm centres. It suits our \u003ca href=\"\/products\/dock-bumper-a003\"\u003e450 x 250 x 100mm standard rubber dock bumper\u003c\/a\u003e and the \u003ca href=\"\/products\/premium-extended-rubber-dock-bumper\"\u003e448 x 248 x 153mm extended dock bumper\u003c\/a\u003e, and it can carry the \u003ca href=\"\/products\/cast-nylon-dock-bumper-450-x-250-x-50mm\"\u003e450mm cast nylon dock bumper\u003c\/a\u003e on a rubber packer. Check the hole centres on any other bumper before ordering. Order one plate for each bumper, so a standard dock door with a bumper either side needs two. Choose this plate when you want to weld to steelwork. If trailers ride over your bumpers, mount the plate on an angle bracket so the bumper sits higher. A 250 x 150 x 150mm bracket is available as an option on our \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760mm sliding dock bumper\u003c\/a\u003e listing.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eOn a steel dock leveller or frame, position the plate with the threaded holes where the bumper should sit, then weld it all round. On concrete, offer it up, mark through the four fixing holes and fix it with M16 through-stud anchors about 125mm long. Put a large M16 washer over each 29mm hole. Then bolt the bumper on with M24 bolts or studs, washers and nuts, tightening until the washers seat without crushing the rubber. Paint any bare or welded steel to protect it outdoors. Check the fixings at routine inspections and replace the bumper once it wears down towards the bolt heads.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre bolts and anchors included?\u003c\/strong\u003e\u003cbr\u003eNo. The price is for the plate only. You need M24 bolts or studs for the bumper and M16 anchors for a concrete wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I weld it?\u003c\/strong\u003e\u003cbr\u003eYes. It has no galvanised coating, so it welds cleanly to steel structures. Paint the weld area afterwards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are two fixing holes bigger than the others?\u003c\/strong\u003e\u003cbr\u003eThe two 29mm holes let the plate be fitted to an angle bracket that raises the bumper above the dock. On a flat wall, cover them with large M16 washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one plate?\u003c\/strong\u003e\u003cbr\u003eYes, the price is for a single 460 x 255 x 15mm plate weighing about 15kg.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. Each plate weighs about 15kg, so it is a one-person lift but best held in place by two people while fixing. For several docks or multi-site orders, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226196484483,"sku":"R_ISP609","price":184.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-back-plate-460x255x15-loading-bay.jpg?v=1794345021"},{"product_id":"heavy-duty-front-plate-dock-bumper-1","title":"Steel Dock Bumper Front Plate - Galvanised Impact Face for 750mm Rubber Loading Bay Bumpers, 760 x 260 x 60mm","description":"\u003cp\u003eThe rubber on a loading bay dock bumper is there to compress, not to be dragged, scuffed and torn by trailers that drop and rise as they are loaded. This galvanised steel dock bumper front plate covers the face of a 750mm rubber dock bumper and takes that wear itself. It measures 760mm long, 260mm wide and 60mm deep, weighs about 26.5kg, and has side cheeks along both long edges and three recessed fixing cups so it bolts through the bumper behind it. It is made for our \u003ca href=\"\/products\/loading-bay-dock-bumper-750-x-250-x-100mm\"\u003e750 x 250 x 100mm rubber dock bumper\u003c\/a\u003e and the same size \u003ca href=\"\/products\/heavy-duty-rubber-dock-bumper-250-x-750-x-100mm-extra-tall-hgv-loading-bay-impact-protector\"\u003eextra tall 750mm bumper\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eSteel takes the friction, rubber takes the impact\u003c\/h3\u003e\n\u003cp\u003eWhen a trailer reverses onto the dock the rubber behind the plate compresses and absorbs the blow. As the trailer is then loaded or unloaded its bed moves up and down, and on a bare bumper that movement grinds against the rubber face. With a steel plate in front, the trailer slides on smooth steel instead, so the rubber is left to do the one job it is best at and lasts far longer.\u003c\/p\u003e\n\u003ch3\u003eSide cheeks for strength and edge protection\u003c\/h3\u003e\n\u003cp\u003eThe plate is not a flat sheet. A cheek about 60mm deep runs down each long edge, turning it into a stiff shallow channel that will not bend under a heavy trailer and that wraps the sides of the rubber, so the edges of the bumper are guarded as well as its face.\u003c\/p\u003e\n\u003ch3\u003eFixing cups keep bolts below the face\u003c\/h3\u003e\n\u003cp\u003eEach of the three 30mm holes sits in a 60mm recessed cup. The washer and nut drop into the cup, below the surface, so the trailer meets flat steel and never catches a bolt head.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanised steel, 760 x 260 x 60mm, about 26.5kg\u003c\/li\u003e\n\u003cli\u003eSide cheeks on both long edges\u003c\/li\u003e\n\u003cli\u003eThree 30mm holes in 60mm fixing cups, 280mm centres\u003c\/li\u003e\n\u003cli\u003eFits 750 x 250 x 100mm rubber dock bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eFront plates are fitted on loading bays at distribution centres, parcel hubs, food and drink depots, builders' merchants and manufacturing sites, anywhere articulated and rigid trailers dock all day. They suit docks with dock levellers, where trailer beds rise and fall during loading, and sites where bare rubber bumpers are being torn or worn through within months. They are also a straightforward upgrade for an existing 750mm bumper that is still sound but starting to show face wear.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e760mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e260mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e60mm, including side cheeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 26.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eSteel, galvanised finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e3 x 30mm through, at 280mm centres, 100mm in from each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing cups\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e60mm diameter, recessed below the face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750 x 250 x 100mm rubber dock bumpers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSuits fixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eM24 studs or bolts, with M24 washers of 50mm outside diameter or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. Fabricated steel can vary slightly between batches, so if an exact size is critical, call us before ordering and we will check current stock.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-front-plate-760x260x60mm-technical-drawing.jpg?v=1794345140\" alt=\"Technical drawing of the 760 x 260 x 60mm galvanised steel dock bumper front plate with front, side and end view dimensions\" width=\"1200\" loading=\"lazy\" style=\"margin:20px 0; max-width:100%; height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eOrder one front plate for each 750mm bumper you want to face, so a standard bay with a bumper either side of the door needs two. The plate is sized for 750 x 250 x 100mm rubber bumpers; if you are fitting it to a bumper bought elsewhere, measure the face and the hole positions first, because this plate's holes are at 280mm centres. Rubber packers that stand the bumper further out from the dock face, and back plates, are sold separately. If you are unsure which parts your bay needs, send us a photo and the bumper size and we will advise.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eOffer the plate over the bumper face with the cheeks wrapping the rubber and the fixing cups lined up with the bumper holes. Fit M24 studs or bolts long enough to pass through the plate, the rubber, any packer or back plate, and into the wall fixing. Use M24 washers no larger than 50mm across so they seat inside the 60mm cups; a standard large dock bumper washer is too big. Tighten evenly so the plate pulls down flat without crushing the rubber. At the plate's 26.5kg, two people should lift it. Check the nuts at routine site inspections and retighten if needed.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich dock bumper does it fit?\u003c\/strong\u003e\u003cbr\u003eIt is designed for 750 x 250 x 100mm rubber dock bumpers, including our two 750mm bumper listings linked above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003cbr\u003eNo. It takes M24 studs or bolts with washers of 50mm outside diameter or less, longer than those used on a bare bumper. Call us and we can advise on lengths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy fit a front plate rather than replace the rubber?\u003c\/strong\u003e\u003cbr\u003eA front plate stops the rubber being worn by moving trailer beds, so it extends the life of a good bumper and of every replacement after it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one plate?\u003c\/strong\u003e\u003cbr\u003eYes, the price is for one front plate weighing about 26.5kg.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For several bays, multi-site orders or help matching parts to an existing bumper, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226197107075,"sku":"R_ISP627","price":236.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-steel-dock-bumper-front-plate-fitted-loading-dock.jpg?v=1794345140"},{"product_id":"heavy-duty-dock-bumper-front-panel","title":"UHMWPE Dock Bumper Front Plate 750 x 250 x 50mm - Replacement Yellow Slide-In Face for Loading Bays","description":"\u003cp\u003eThe yellow face on a steel-cradle dock bumper is the part that meets every trailer. It takes the knock when a lorry reverses onto the bay, then rubs up and down as the trailer sinks under a loaded forklift and rises again as the load comes off. In time it wears, chips or gets torn by a damaged rear frame. This replacement front plate is a solid yellow UHMWPE face, 750mm long, 250mm wide and 50mm thick, weighing about 8.5kg. It slides straight into the bumper's existing steel cradle, so you renew the wearing face without unbolting the bumper from the dock wall.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA low-friction face that lets the trailer slide\u003c\/h3\u003e\n\u003cp\u003eUHMWPE (ultra high molecular weight polyethylene) has a very low friction coefficient. When a trailer's suspension moves during loading, its rear frame slides along the face instead of dragging it. That cuts the tearing and scuffing a plain rubber face suffers at a busy bay, and it reduces the strain passed back into the cradle and its fixings.\u003c\/p\u003e\n\u003ch3\u003eSlide-in fit, no bolts through the face\u003c\/h3\u003e\n\u003cp\u003eThe plate has a 230mm wide front face and a 10mm flange along each long edge at the back, making it 250mm across the flanges. The flanges run behind the front lips of the steel cradle, so the plate is held in place along its full length and there are no bolt heads on the striking face to catch a trailer.\u003c\/p\u003e\n\u003ch3\u003eHighly visible yellow\u003c\/h3\u003e\n\u003cp\u003eBright yellow plastic stands out against grey concrete and steel, so drivers reversing in on mirrors and cameras can see exactly where the bumpers are, even on a dull day or under yard lighting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid yellow UHMWPE, 750 x 250 x 50mm, about 8.5kg\u003c\/li\u003e\n\u003cli\u003e230mm face with 10 x 10mm flanges each side\u003c\/li\u003e\n\u003cli\u003eVery low friction, so the trailer slides rather than tears\u003c\/li\u003e\n\u003cli\u003eSlides into the existing cradle, no fixing holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThis face plate suits loading bays at distribution centres, warehouses, cold stores, factories and retail depots where HGV trailers back onto a raised dock. It is the standard 50mm face for our \u003ca href=\"\/products\/low-profile-dock-bumper-765-x-270-x-66mm\"\u003elow profile dock bumper 765 x 270 x 66mm\u003c\/a\u003e, and the same 750 x 250mm sliding face is used in our \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003esliding dock bumper 760 x 270 x 110mm\u003c\/a\u003e and \u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003edeep sliding dock bumper 760 x 275 x 165mm\u003c\/a\u003e. Site and facilities teams keep spares so a damaged face can be swapped the same day.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e750mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e250mm over the back flanges, 230mm front face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e50mm overall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eBack flanges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e10mm thick, 10mm each side, full length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 8.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eUHMWPE (ultra high molecular weight polyethylene), yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNone, slides into the bumper's steel cradle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSupplied as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eFace plate only, no cradle or fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. If you are replacing a face on an older or different bumper, measure the cradle opening and the old plate before ordering, or call us and we will check the fit.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-front-plate-750x250x50-technical-drawing.jpg?v=1794345147\u0026amp;width=1200\" alt=\"Technical drawing of the 750 x 250 x 50mm yellow UHMWPE dock bumper front plate with front, end and side views and how it sits in the steel cradle\" width=\"1200\" loading=\"lazy\" style=\"max-width:100%; height:auto; margin:20px 0;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the face you are replacing. This plate is 750 x 250mm across the flanges and 50mm thick, with a 230mm face. If your trailers need to stand further off the dock, for example where a leveller lip or tail lift needs more room, our \u003ca href=\"\/products\/deep-sliding-dock-bumper-face-750-x-250-x-100mm\"\u003edeep sliding dock bumper face 750 x 250 x 100mm\u003c\/a\u003e fits the same cradles and gives 50mm more projection. If the steel cradle itself is bent or corroded, replace the complete bumper instead of the face alone.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eLift the worn face straight up and out of the top of the cradle; a bracket or dock edge above may need to be cleared first. Check the cradle is straight and its fixings are tight, clear out any grit, then lower the new plate in from the top with its flat face outwards and the flanges behind the cradle lips. At 8.5kg it is best handled by two people at height. Inspect the face at routine checks and swap it when it is gouged, split or worn thin.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need bolts?\u003c\/strong\u003e\u003cbr\u003eNo. It has no fixing holes. The back flanges hold it in the steel cradle, which is already fixed to the dock wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich bumpers does it fit?\u003c\/strong\u003e\u003cbr\u003eOur low profile dock bumper 765 x 270 x 66mm and our 760mm sliding dock bumpers use this 750 x 250mm face. For other makes, check the cradle opening matches the 250mm flange width and 230mm face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as a rubber face?\u003c\/strong\u003e\u003cbr\u003eNo. UHMWPE is a hard, slippery plastic, so trailers slide along it rather than gripping and tearing it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for one plate?\u003c\/strong\u003e\u003cbr\u003eYes, the price is for a single 750 x 250 x 50mm front plate. Most bays use two bumpers, so order two to renew both sides.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for express UK delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For multi-bay or multi-site orders, call us on 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226197205379,"sku":"R_ISP629","price":403.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/uhmwpe-dock-bumper-front-plate-750x250x50-fitted-loading-dock-cradle.jpg?v=1794345147"},{"product_id":"premium-dock-bumper-front-plate-1","title":"Dock Bumper Front Plate 450 x 250 x 50mm - Yellow UHMW-PE Sliding Replacement Face for Loading Bay Bumpers","description":"\u003cp\u003eOn a sliding dock bumper, the yellow front plate is the part that meets every trailer. It takes the contact, wears slowly, and is meant to be swapped while the steel cradle stays bolted to the dock wall. This replacement face is a solid slab of yellow UHMW polyethylene, 450mm long, 250mm wide and 50mm thick, weighing about 5kg. It has no holes at all: a 10mm flange along each long edge runs in the side returns of a galvanised steel cradle, so the face can slide up and down with the trailer. Maintenance teams use it to renew a worn bumper face for a fraction of the cost of a new unit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eA low friction face that moves with the trailer\u003c\/h3\u003e\n\u003cp\u003eA parked trailer rises and sinks on its suspension every time a forklift drives on and off. UHMW polyethylene has a very low coefficient of friction, so the back of the trailer slides along the face rather than gripping and tearing it, and the plate itself can travel up and down inside its cradle. Far less of that movement turns into scraping.\u003c\/p\u003e\n\u003ch3\u003eNothing on the face to catch\u003c\/h3\u003e\n\u003cp\u003eThere are no bolt holes or recesses in the striking face. The plate is held by its edge flanges, so there is no exposed fixing and no hole edge for an underrun bar or rear frame to snag on.\u003c\/p\u003e\n\u003ch3\u003eHighly visible yellow\u003c\/h3\u003e\n\u003cp\u003eThe bright yellow face gives a reversing driver a clear reference point either side of the door.\u003c\/p\u003e\n\u003ch3\u003eReplace the wearing part only\u003c\/h3\u003e\n\u003cp\u003eWhen the face is scored or worn, slide the old plate out and the new one in. The cradle and the wall fixings are not disturbed, and there are no new holes to drill.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYellow UHMW polyethylene, 450 x 250 x 50mm, about 5kg\u003c\/li\u003e\n\u003cli\u003eVery low friction, durable and highly visible\u003c\/li\u003e\n\u003cli\u003eNo holes, held by two 10mm side flanges\u003c\/li\u003e\n\u003cli\u003eSlides in and out of a galvanised steel cradle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eThis face is fitted on sliding dock bumpers at distribution centres, manufacturing plants, cold stores and goods-in bays that take articulated trailers. It is the face used in our \u003ca href=\"\/products\/heavy-duty-dock-bumper-465-x-280-x-160-mm\"\u003e465 x 280 x 160mm deep sliding dock bumper\u003c\/a\u003e, and it matches the 450mm, 50mm thick face of the \u003ca href=\"\/products\/rubber-steel-dock-bumper-465-x-275-x-110mm\"\u003e465 x 275 x 110mm sliding dock bumper\u003c\/a\u003e. It also fits the \u003ca href=\"\/products\/heavy-duty-dock-bumper-back-plate-1\"\u003e460 x 270 x 35mm galvanised back plate\u003c\/a\u003e, a simple steel cradle with returns made to hold a sacrificial front plate.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin:20px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eOverall size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e450 x 250 x 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eRaised face\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e225mm wide, 40mm proud of the flanges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eSide flanges\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e10mm thick, 12.5mm wide, along both long edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eApprox. 5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eUHMW polyethylene (ultra high molecular weight polyethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eColour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eFixing holes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNone, held by the cradle's side returns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eHardness and temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px; border:1px solid #dee2e6;\"\u003eOne front plate. Cradle, rubber packing and fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDimensions are typical. If you are replacing a face from another make, measure the inside width between your cradle's returns and the face depth before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/dock-bumper-front-plate-450x250x50-uhmwpe-technical-drawing.jpg?width=1200\" alt=\"Technical drawing of the 450 x 250 x 50mm yellow UHMW-PE dock bumper front plate with face view, end view of the sliding flanges and key specifications\" width=\"1200\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose this plate when the steel cradle on your dock is sound and only the yellow face is worn, split or scored. If the cradle is bent or its fixings have pulled, replace the cradle too: the \u003ca href=\"\/products\/heavy-duty-dock-bumper-back-plate-1\"\u003e460 x 270 x 35mm back plate\u003c\/a\u003e takes this face directly, and the \u003ca href=\"\/products\/dock-bumper-back-plate-470-x-275-x-130-mm\"\u003e470 x 275 x 130mm cradle\u003c\/a\u003e is the one used in the deep sliding bumper. For a new bay, order the complete \u003ca href=\"\/products\/heavy-duty-dock-bumper-465-x-280-x-160-mm\"\u003edeep sliding dock bumper\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePrefer a rubber face? The \u003ca href=\"\/products\/premium-rubber-front-plate-for-dock-bumpers\"\u003eblack rubber front plate\u003c\/a\u003e suits the same 460 x 270 x 35mm back plate. Most loading bays have two bumpers, so order two faces to keep both sides of the door matched. Browse all \u003ca href=\"\/collections\/dock-bumpers\"\u003edock bumpers\u003c\/a\u003e for other sizes.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eSlide the worn plate out of the cradle and clear any grit from the returns and from behind the plate. Offer the new plate in with its flat back facing the wall and its flanges inside the returns, then slide it home. At about 5kg it is a one-person job; keep the bay closed to vehicles while you work.\u003c\/p\u003e\n\u003cp\u003eCheck the face and the cradle fixings during routine bay inspections. Replace the plate before it wears through to the steel. A dock bumper protects the building and the vehicle from routine docking contact; it is not a vehicle restraint and does not replace wheel chocks or safe docking procedures.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need bolts?\u003c\/strong\u003e\u003cbr\u003eNo. The plate has no holes. Its two side flanges run in the returns of the steel cradle, which is the part bolted to the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the cradle included?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is the yellow front plate only. The cradle, rubber packing and wall fixings are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy UHMW polyethylene rather than rubber?\u003c\/strong\u003e\u003cbr\u003eIts very low friction lets the trailer slide along the face as it rises and falls, so it suits busy bays where a rubber face scuffs quickly.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrders placed before 2pm, Monday to Friday, are dispatched the same day with Express UK Delivery. Not sure which cradle you have? Call 01744 520 110 or email sales@industrialsuppliesco.co.uk with a photo and we will help you match it.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57226197238147,"sku":"R_ISP631","price":256.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-dock-bumper-yellow-front-plate-fitted-loading-dock-450x250x50.jpg?v=1794345098"}],"url":"https:\/\/industrialsuppliesco.co.uk\/collections\/loading-bay-protection.oembed","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}