{"title":"Handrails \u0026 Brackets","description":"","products":[{"product_id":"premium-sloping-side-outlet-elbow-30-47","title":"Key Clamp Top Left Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the head of a stair and slopes down it.\u003c\/strong\u003e It sits on top of the corner post: the post runs into one socket, the level top rail goes into another, and a third socket at 90 degrees in plan points down the stair so the sloping top rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-left-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the top left hand sloping side outlet elbow for 48.3mm tube: A 66, B 65, C 98, D 133mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne top left hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eTop rail, on top of the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 66mm, B 65mm, C 98mm, D 133mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.18kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the left hand version. The \u003ca href=\"\/products\/premium-sloping-down-elbow-30-45-degree-48-3mm-tube\"\u003eright hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKnee rail at the same corner: \u003ca href=\"\/products\/sloping-side-outlet-elbow-30-45\"\u003emiddle left hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-45\"\u003etop left hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970402001283,"sku":"SSHF-223939-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-left-sloping-side-outlet-elbow-48-3-lead.jpg?v=1794081293"},{"product_id":"premium-sloping-down-elbow-30-45-degree-48-3mm-tube","title":"Key Clamp Top Right Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the head of a stair and slopes down it.\u003c\/strong\u003e It sits on top of the corner post: the post runs into one socket, the level top rail into another, and a third socket at 90 degrees in plan points down the stair so the sloping top rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the top right hand sloping side outlet elbow for 48.3mm tube: A 68, B 63, C 99, D 135mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne top right hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eTop rail, on top of the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 63mm, C 99mm, D 135mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the right hand version. The \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-47\"\u003eleft hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKnee rail at the same corner: \u003ca href=\"\/products\/premium-sloping-down-side-outlet-elbow\"\u003emiddle right hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-46\"\u003etop right hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970398560643,"sku":"SSHF-551619-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-sloping-side-outlet-elbow-48-3-loading-platform-stair.jpg?v=1794057082"},{"product_id":"sloping-down-side-outlet-elbow-30-45","title":"Key Clamp Middle Left Hand Sloping Side Outlet Elbow 30-45°, 42.4mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 42.4mm (32NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle left hand sloping side outlet elbow for 42.4mm tube: A 60, B 72, C 56, D 86mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle left hand sloping side outlet elbow, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 72mm, C 56mm, D 86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.78kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the left hand version. The \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-46\"\u003eright hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-45\"\u003etop left hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 48.3mm tube: \u003ca href=\"\/products\/sloping-side-outlet-elbow-30-45\"\u003emiddle left hand elbow, 48.3mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/premium-sloping-cross-piece-42-4mm-tube\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970377720195,"sku":"SSHF-649923-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-42-4-lead.jpg?v=1794081291"},{"product_id":"sloping-down-side-outlet-elbow-30-46","title":"Key Clamp Middle Right Hand Sloping Side Outlet Elbow 30-45°, 42.4mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 42.4mm (32NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-right-sloping-side-outlet-elbow-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle right hand sloping side outlet elbow for 42.4mm tube: A 60, B 72, C 56, D 86mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle right hand sloping side outlet elbow, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 72mm, C 56mm, D 86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.78kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the right hand version. The \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-45\"\u003eleft hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-46\"\u003etop right hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 48.3mm tube: \u003ca href=\"\/products\/premium-sloping-down-side-outlet-elbow\"\u003emiddle right hand elbow, 48.3mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/premium-sloping-cross-piece-42-4mm-tube\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970352062851,"sku":"SSHF-715459-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-right-sloping-side-outlet-elbow-42-4-lead.jpg?v=1794081164"},{"product_id":"sloping-side-outlet-elbow-30-45","title":"Key Clamp Middle Left Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle left hand sloping side outlet elbow for 48.3mm tube: A 68, B 81, C 70, D 98mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle left hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 81mm, C 70mm, D 98mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.02kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the left hand version. The \u003ca href=\"\/products\/premium-sloping-down-side-outlet-elbow\"\u003eright hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-47\"\u003etop left hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-45\"\u003emiddle left hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57960636481923,"sku":"SSHF-780995-01","price":25.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-48-3-lead.jpg?v=1794081162"},{"product_id":"premium-sloping-down-side-outlet-elbow","title":"Key Clamp Middle Right Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle right hand sloping side outlet elbow for 48.3mm tube: A 68, B 81, C 70, D 98mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle right hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 81mm, C 70mm, D 98mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.02kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the right hand version. The \u003ca href=\"\/products\/sloping-side-outlet-elbow-30-45\"\u003eleft hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-down-elbow-30-45-degree-48-3mm-tube\"\u003etop right hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-46\"\u003emiddle right hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57960474378627,"sku":"SSHF-846531-01","price":25.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-sloping-side-outlet-elbow-48-3-stair-guard-rail.jpg?v=1794068035"},{"product_id":"premium-circular-black-coil-20m","title":"Black Round PVC Handrail Capping 40mm x 8mm, 20m Coil for Steel Flat Bar","description":"\u003cp\u003e\u003cstrong\u003eA full, round black handrail on a flat bar railing.\u003c\/strong\u003e This glossy black PVC capping clips over 40mm x 8mm steel flat bar and turns it into a near-circular handrail 56.6mm wide and 41.4mm high, the size and shape of a proper round rail that a hand can wrap around. Warm it, hook it over the bar and press it down: the curled lips grip under both edges and the capping shrinks tight as it cools. You get one continuous 20 metre coil, and the surface resists scratches, stains and knocks. The price shown is for one 20m coil, which works out at about £97.55 a metre including VAT.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-round-pvc-handrail-capping-40x8-size-guide.jpg?width=1200\" alt=\"Size guide for black round PVC handrail capping on 40mm x 8mm flat bar\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA real round grip.\u003c\/strong\u003e The profile is almost a full circle, so the hand closes right round it, much like a 42mm round tube rail. Flat capping profiles give a lower, flatter top.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarm and comfortable.\u003c\/strong\u003e PVC is warmer to hold than bare steel in winter and stays cool in summer sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack goes with everything.\u003c\/strong\u003e Black looks smart on black, grey, white or galvanised railings and does not show grime.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne piece, no joins.\u003c\/strong\u003e A full 20m coil caps long ramps and multi-flight stairs in one run, bends included.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eAccessible ramps and steps outside schools, surgeries, libraries, offices and shops; stair balustrades in public buildings; any flat bar railing where a fuller, round handrail is wanted. Indoors and out.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne continuous 20 metre coil of black round PVC handrail capping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e40mm wide x 8mm thick steel flat bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003e56.6mm wide x 41.4mm high, near-circular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSlot\u003c\/th\u003e\n\u003ctd\u003e8mm high, 40mm between the lips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack, gloss finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eThermoplastic PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eScratch, abrasion and stain resistant, colour fast, shock resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting\u003c\/th\u003e\n\u003ctd\u003eWarmed to about 75°C, pressed over the bar, shrinks tight as it cools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoints and ends\u003c\/th\u003e\n\u003ctd\u003eHeat welded with a welding blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor and outdoor railings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow much do you need?\u003c\/h2\u003e\n\u003cp\u003eMeasure along the top of the flat bar, following any bends and returns, and add a little for trimming. One coil covers:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eJob\u003c\/th\u003e\n\u003cth\u003eRuns from one 20m coil\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp or stair rails 4m long\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRailing panels 2m long\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne continuous balustrade\u003c\/td\u003e\n\u003ctd\u003eUp to 20m with no joins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRound or standard profile?\u003c\/h2\u003e\n\u003cp\u003eThis round profile gives the fullest grip. For a flatter, lower capping on 40mm x 8mm bar, choose our \u003ca href=\"\/products\/premium-plastic-handrail-capping-40mm-x-8mm\"\u003estandard black 40mm x 8mm capping\u003c\/a\u003e, also made in 12 colours. See every size and colour in \u003ca href=\"\/collections\/handrail-capping\"\u003ehandrail capping\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eClean the flat bar and remove sharp burrs and weld spatter from the edges. Uncoil the capping and warm it to about 75°C with a hot air gun. Starting at one end, open the lips, hook the capping over the bar and press it down by hand, warming a short way ahead as you go. On bends, warm the capping longer and stretch it slightly on the outside of the bend so the inside does not wrinkle; hold it with masking tape until it cools. Joints and end caps are welded with a hot welding blade: press the cut ends to the blade until they melt, push them together for at least ten seconds, let the seam cool, then trim and file it smooth. In cold weather, keep the coil indoors overnight before fitting.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWipe with warm soapy water. Do not use solvent cleaners or thinners, as they soften PVC. Check the ends and joints once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for the whole coil?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one continuous 20 metre coil, about £97.55 a metre including VAT.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 40 x 10 or 40 x 6 flat bar?\u003c\/summary\u003e\u003cp\u003eIt is made for 40mm x 8mm bar. If your bar is a different thickness, call us with its size before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit a round tube handrail?\u003c\/summary\u003e\u003cp\u003eNo. It clips over flat bar only.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go round bends?\u003c\/summary\u003e\u003cp\u003eYes. Warmed capping follows sweeping bends; sharp corners are cut, mitred and heat welded.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eYes. It is used on outdoor ramp and stair railings and the colour does not fade.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need special tools?\u003c\/summary\u003e\u003cp\u003eA hot air gun is enough to fit straight runs and bends. Welded joints and end caps need a PVC welding blade.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For long runs or a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm stock and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57823455150467,"sku":"SSHF-106627-01","price":1950.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-round-pvc-handrail-capping-40x8-library-ramp.jpg?v=1794077211"},{"product_id":"galvanised-modular-rail-return-bend","title":"Galvanised 500mm Platform Return Handrail Bend for 33.7mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 33.7mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend closes the open end of a level two-rail guard rail, joining the top rail to the middle rail in one smooth U so there is no open tube end to catch clothing. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-500mm-platform-return-handrail-bend-34mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 500mm platform return handrail bend for 33.7mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 33.7mm outside diameter (25NB, 1 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eEnds of guard rails on mezzanine platforms, loading bays, roof plant areas, walkways and access gaps; any two-rail barrier with the rails at 500mm centres.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e33.7mm outside diameter (25NB, 1 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSquared U, two 90 degree bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eTwo parallel 500mm legs at 500mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.23kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-33-7mm-tubing\"\u003esplice lock for 33.7mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-33-7mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-return-bend-1\"\u003e500mm Platform Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend-1\"\u003e90 Degree Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 33.7mm outside diameter, the same as standard 25NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57821089890691,"sku":"SSHF-234243-01","price":36.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-500mm-platform-return-handrail-bend-34mm-canal-lock-walkway.jpg?v=1794074788"},{"product_id":"galvanised-modular-rail-return-bend-1","title":"Galvanised 500mm Platform Return Handrail Bend for 42.4mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 42.4mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend closes the open end of a level two-rail guard rail, joining the top rail to the middle rail in one smooth U so there is no open tube end to catch clothing. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-500mm-platform-return-handrail-bend-42mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 500mm platform return handrail bend for 42.4mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 42.4mm outside diameter (32NB, 1 1\/4 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eEnds of guard rails on mezzanine platforms, loading bays, roof plant areas, walkways and access gaps; any two-rail barrier with the rails at 500mm centres.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSquared U, two 90 degree bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eTwo parallel 500mm legs at 500mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-42-4mm\"\u003esplice lock for 42.4mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-42-4mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-return-bend\"\u003e500mm Platform Return Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend\"\u003e90 Degree Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-38-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-stair-return-42mm-tube\"\u003e38 Degree Stair Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 42.4mm outside diameter, the same as standard 32NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57820910190979,"sku":"SSHF-627459-01","price":45.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-500mm-platform-return-handrail-bend-42mm-silo-access-platform.jpg?v=1794074789"},{"product_id":"professional-corner-tee-42-4mm-tube","title":"316 Stainless Steel Corner Tee for 42.4 x 2.6mm Handrail Tube, Weldable 3 Way Fitting","description":"\u003cp\u003e\u003cstrong\u003eA 316 stainless steel three-way corner for handrails and balustrades.\u003c\/strong\u003e Three 42.4mm sockets meet at a rounded corner, joining a top rail, a return rail and a corner post in one neat fitting. It is a loose fit on 42.4 x 2.6mm tube and is made to be TIG welded and polished, for a seamless corner. Marine grade 316 stainless, satin finish. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-stainless-corner-tee-42-4x2-6-size-guide.jpg?width=1200\" alt=\"Size guide for the 316 stainless steel corner tee for 42.4 x 2.6mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOne-piece corner.\u003c\/strong\u003e Joins three tubes at right angles with a smooth, rounded corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade to weld.\u003c\/strong\u003e The loose fit leaves room for a full penetration TIG weld.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMarine grade.\u003c\/strong\u003e 316 stainless steel resists salt air and pool chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean finish.\u003c\/strong\u003e Weld, grind and polish for a seamless corner.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCorners of stainless steel balustrades, balcony and terrace railings, stair handrail returns, seafront and poolside rails and stainless steel frames.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter x 2.6mm wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e3-way corner tee, sockets at 90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eLoose fit, made to be welded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e316 marine grade stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.35kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the tubes square and deburr them. Push them fully into the sockets, check the corner is square and tack weld each joint. TIG weld all round, then grind and polish the welds and pickle to restore the stainless finish.\u003c\/p\u003e\n\u003ch2\u003eRelated parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/316-stainless-steel-corner-tee\"\u003ePush-fit 316 corner tee for 42.4 x 2.0mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one tee?\u003c\/summary\u003e\u003cp\u003eYes, one corner tee.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 2.0mm wall tube?\u003c\/summary\u003e\u003cp\u003eIt will be loose. For 42.4 x 2.0mm tube use our push-fit 316 corner tee.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I glue it instead?\u003c\/summary\u003e\u003cp\u003eIt is designed to be welded. For a glued or push-fit joint use the 2.0mm wall push-fit tee.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For larger quantities call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57734452183427,"sku":"SSHF-087747-01","price":35.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-stainless-corner-tee-42-4x2-6-seafront-balustrade.jpg?v=1794075421"},{"product_id":"premium-38-degree-rake-flat-base","title":"Galvanised 38 Degree Stair Rake Handrail Standard for 42.4mm Tube, 2 Rail Ball Stanchion, 450mm Centres","description":"\u003cp\u003e\u003cstrong\u003eA two-rail ball stanchion made for stairs.\u003c\/strong\u003e The balls are drilled at 38 degrees so the rails run straight through at stair pitch, and the base plate is set at the same angle so it bolts flat onto a sloping concrete stair string, ramp edge or raked wall top. Two 75mm forged balls, 450mm apart, are drilled through for 42.4mm (32NB) tube and lock the rails with M8 grub screws. Hot-dip galvanised for outdoor use. The price shown is for one standard.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-stair-rake-ball-standard-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 38 degree stair rake ball standard for 42.4mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this standard\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRails follow the stair.\u003c\/strong\u003e Angled holes mean the tube passes cleanly through each ball at 38 degrees, with no bending or packing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlate sits flat on the slope.\u003c\/strong\u003e The 38 degree base plate beds down on a sloping string or wall top, so the post stands upright.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised all over.\u003c\/strong\u003e Hot-dip galvanised mild steel stands up to rain and road salt with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple to build.\u003c\/strong\u003e Slide the tube rails through the balls, tighten the grub screws, and the run is done. No cutting fittings or welding on site.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eGuard rails up external concrete stairs, escape stairs, steps to plant rooms and pump stations, stepped walkways, stadium and park steps, and anywhere a two-rail barrier follows a 38 degree pitch.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 38 degree rake flat base ball standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRails\u003c\/th\u003e\n\u003ctd\u003e2 (top rail and knee rail)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall centres\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom of standard to lower ball centre\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBalls\u003c\/th\u003e\n\u003ctd\u003e75mm diameter, drilled through at 38 degrees, M8 grub screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase plate\u003c\/th\u003e\n\u003ctd\u003e190 x 65 x 12mm, set at 38 degrees, 2 x 18mm holes at 140mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial and finish\u003c\/th\u003e\n\u003ctd\u003eMild steel, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eTube, end caps and fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eSetting the rail height\u003c\/h2\u003e\n\u003cp\u003eThe top rail ball sits 900mm above the bottom of the post and the knee rail ball 450mm above it, measured upright. Check the vertical height of the top rail above the stair nosings against the guarding height your project needs.\u003c\/p\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eAllow one standard at each end and corner, with intermediate standards at no more than 2m centres. Each rail run needs two lengths of 42.4mm tube.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRun along the slope\u003c\/th\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003cth\u003eTube (2 rails)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e4m\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e8m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6m\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e12m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20m\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e40m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCheck the stair pitch is close to 38 degrees. Set out the top and bottom standards on the sloping surface, keeping the fixings a safe distance from any edge, and fix them first with anchors through both holes in the base plate, string a line between them and fix the rest to it. Feed the tube through the balls, leave a short overhang at each end, and tighten the M8 grub screws. Finish open tube ends with \u003ca href=\"\/products\/premium-handrail-cap-end-for-42-4mm-tube\"\u003e42.4mm end caps\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Check the grub screws and fixings once a year, and treat any cut tube ends or damaged areas with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eOther ball standards in the range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-38-degree-rake-flat-base-34mm-tube\"\u003e38 degree stair rake, 33.7mm tube, 450mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-flat-base-handrail-for-42mm-tube\"\u003eFlat base, 42.4mm tube, 550mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/flat-base-handrail-standard-42mm-tube\"\u003eFlat base, 42.4mm tube, 500mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-side-palm-handrail\"\u003eSide palm, 42.4mm tube, 550mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one standard?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised 38 degree rake flat base ball standard.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat tube does it take?\u003c\/summary\u003e\u003cp\u003e42.4mm outside diameter tube, sold as 32NB or 1 1\/4 inch nominal bore.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is not 38 degrees?\u003c\/summary\u003e\u003cp\u003eThe balls and plate are made for 38 degrees, the common pitch for external stairs. For a much shallower ramp or a level run, use a flat base standard instead.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Choose bolts or anchors to suit the concrete, steel or masonry you are fixing to.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. See the full range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e, or call 01744 520 110 or email sales@industrialsuppliesco.co.uk for project quantities.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700854661507,"sku":"SSHF-923139-01","price":57.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-stair-rake-ball-standard-42-4-car-park-stairs.jpg?v=1794074177"},{"product_id":"premium-38-degree-rake-flat-base-34mm-tube","title":"Galvanised 38 Degree Stair Rake Handrail Standard for 33.7mm Tube, 2 Rail Ball Stanchion, 450mm Centres","description":"\u003cp\u003e\u003cstrong\u003eA two-rail ball stanchion made for stairs.\u003c\/strong\u003e The balls are drilled at 38 degrees so the rails run straight through at stair pitch, and the base plate is set at the same angle so it bolts flat onto a sloping concrete stair string, ramp edge or raked wall top. Two 66mm forged balls, 450mm apart, are drilled through for 33.7mm (25NB) tube and lock the rails with M8 grub screws. Hot-dip galvanised for outdoor use. The price shown is for one standard.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-stair-rake-ball-standard-33-7-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 38 degree stair rake ball standard for 33.7mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this standard\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRails follow the stair.\u003c\/strong\u003e Angled holes mean the tube passes cleanly through each ball at 38 degrees, with no bending or packing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlate sits flat on the slope.\u003c\/strong\u003e The 38 degree base plate beds down on a sloping string or wall top, so the post stands upright.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised all over.\u003c\/strong\u003e Hot-dip galvanised mild steel stands up to rain and road salt with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple to build.\u003c\/strong\u003e Slide the tube rails through the balls, tighten the grub screws, and the run is done. No cutting fittings or welding on site.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eGuard rails up external concrete stairs, escape stairs, steps to plant rooms and pump stations, stepped walkways, stadium and park steps, and anywhere a two-rail barrier follows a 38 degree pitch.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 38 degree rake flat base ball standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e33.7mm outside diameter (25NB, 1 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRails\u003c\/th\u003e\n\u003ctd\u003e2 (top rail and knee rail)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBall centres\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottom of standard to lower ball centre\u003c\/th\u003e\n\u003ctd\u003e450mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBalls\u003c\/th\u003e\n\u003ctd\u003e66mm diameter, drilled through at 38 degrees, M8 grub screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase plate\u003c\/th\u003e\n\u003ctd\u003e190 x 65 x 12mm, set at 38 degrees, 2 x 18mm holes at 140mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial and finish\u003c\/th\u003e\n\u003ctd\u003eMild steel, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eTube, end caps and fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eSetting the rail height\u003c\/h2\u003e\n\u003cp\u003eThe top rail ball sits 900mm above the bottom of the post and the knee rail ball 450mm above it, measured upright. Check the vertical height of the top rail above the stair nosings against the guarding height your project needs.\u003c\/p\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eAllow one standard at each end and corner, with intermediate standards at no more than 2m centres. Each rail run needs two lengths of 33.7mm tube.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRun along the slope\u003c\/th\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003cth\u003eTube (2 rails)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e4m\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e8m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6m\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e12m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e20m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20m\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e40m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCheck the stair pitch is close to 38 degrees. Set out the top and bottom standards on the sloping surface, keeping the fixings a safe distance from any edge, and fix them first with anchors through both holes in the base plate, string a line between them and fix the rest to it. Feed the tube through the balls, leave a short overhang at each end, and tighten the M8 grub screws. Finish open tube ends with \u003ca href=\"\/products\/premium-handrail-cap-end-for-33-7mm-tube\"\u003e33.7mm end caps\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Check the grub screws and fixings once a year, and treat any cut tube ends or damaged areas with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eOther ball standards in the range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-38-degree-rake-flat-base\"\u003e38 degree stair rake, 42.4mm tube, 450mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-flat-base-handrail\"\u003eFlat base, 33.7mm tube, 550mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-galvanised-handrail-standard\"\u003eFlat base, 33.7mm tube, 500mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-galvanised-side-palm-handrail\"\u003eSide palm, 33.7mm tube, 500mm centres\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one standard?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised 38 degree rake flat base ball standard.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat tube does it take?\u003c\/summary\u003e\u003cp\u003e33.7mm outside diameter tube, sold as 25NB or 1 inch nominal bore.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is not 38 degrees?\u003c\/summary\u003e\u003cp\u003eThe balls and plate are made for 38 degrees, the common pitch for external stairs. For a much shallower ramp or a level run, use a flat base standard instead.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Choose bolts or anchors to suit the concrete, steel or masonry you are fixing to.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. See the full range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e, or call 01744 520 110 or email sales@industrialsuppliesco.co.uk for project quantities.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700753408387,"sku":"SSHF-316355-01","price":55.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-stair-rake-ball-standard-33-7-factory-fire-exit-steps.jpg?v=1794074176"},{"product_id":"galvanised-modular-rail-platform-return-bend","title":"Galvanised Platform Return Handrail Bend for 42.4mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 42.4mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend closes the open end of a level two-rail guard rail, joining the top rail to the middle rail in one smooth U so there is no open tube end to catch clothing. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-platform-return-handrail-bend-42mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised platform return handrail bend for 42.4mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 42.4mm outside diameter (32NB, 1 1\/4 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eEnds of guard rails on mezzanine platforms, loading bays, roof plant areas, walkways and access gaps; any two-rail barrier with the rails at 550mm centres.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSquared U, two 90 degree bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eTwo parallel 500mm legs at 550mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.02kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-42-4mm\"\u003esplice lock for 42.4mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-42-4mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend\"\u003e90 Degree Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-38-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-stair-return-42mm-tube\"\u003e38 Degree Stair Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 42.4mm outside diameter, the same as standard 32NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700366483843,"sku":"SSHF-332163-01","price":45.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-platform-return-handrail-bend-42mm-roof-plant-area.jpg?v=1794073652"},{"product_id":"premium-modular-rail-stair-return-42mm-tube","title":"Galvanised 38 Degree Stair Return Handrail Bend for 42.4mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 42.4mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend closes the end of a two-rail stair guard rail, joining the sloping top rail to the sloping middle rail in one smooth loop. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-stair-return-handrail-bend-42mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised stair return handrail bend for 42.4mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 42.4mm outside diameter (32NB, 1 1\/4 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eBottoms and tops of external escape stairs, plant room stairs and steps down to promenades and car parks where a two-rail guard rail follows the stair.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSloping U, both legs at 38 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eTwo parallel 500mm legs at 450mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.48kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-42-4mm\"\u003esplice lock for 42.4mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-42-4mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend\"\u003e90 Degree Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-38-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 42.4mm outside diameter, the same as standard 32NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700337287555,"sku":"SSHF-692611-01","price":51.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-stair-return-handrail-bend-42mm-escape-stair.jpg?v=1794073652"},{"product_id":"premium-modular-rail-platform-return-bend","title":"Galvanised Platform Return Handrail Bend for 33.7mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 33.7mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend closes the open end of a level two-rail guard rail, joining the top rail to the middle rail in one smooth U so there is no open tube end to catch clothing. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-platform-return-handrail-bend-34mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised platform return handrail bend for 33.7mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 33.7mm outside diameter (25NB, 1 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eEnds of guard rails on mezzanine platforms, loading bays, roof plant areas, walkways and access gaps; any two-rail barrier with the rails at 550mm centres.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e33.7mm outside diameter (25NB, 1 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSquared U, two 90 degree bends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eTwo parallel 500mm legs at 550mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.23kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-33-7mm-tubing\"\u003esplice lock for 33.7mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-33-7mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend-1\"\u003e90 Degree Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 33.7mm outside diameter, the same as standard 25NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700293640579,"sku":"SSHF-725379-01","price":36.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-platform-return-handrail-bend-34mm-mezzanine-platform.jpg?v=1794073651"},{"product_id":"galvanised-modular-rail-38-ramp-bend","title":"Galvanised 38 Degree Stair Handrail Bend for 42.4mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 42.4mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend takes a level galvanised tube handrail at the top of a flight smoothly down to follow the stair pitch, with no clamp or knuckle at the change of angle. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-38-degree-stair-handrail-bend-42mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 38 degree stair handrail bend for 42.4mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 42.4mm outside diameter (32NB, 1 1\/4 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eTops and bottoms of external stairs at factories, schools and car parks; steps from footbridges and landings; park and estate steps where a level rail meets a sloping one.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSingle bend, level leg turning down 38 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eLevel leg 450mm to the start of the bend, sloping leg continues down at 38 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.73kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-42-4mm\"\u003esplice lock for 42.4mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-42-4mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend\"\u003e90 Degree Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-stair-return-42mm-tube\"\u003e38 Degree Stair Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 42.4mm outside diameter, the same as standard 32NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700171186563,"sku":"SSHF-118595-01","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-38-degree-stair-handrail-bend-42mm-park-steps.jpg?v=1794073568"},{"product_id":"galvanised-modular-rail-90-degree-bend","title":"Galvanised 90 Degree Handrail Bend for 42.4mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 42.4mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend turns a galvanised tube handrail or guard rail through a smooth right angle, either round a corner in plan or straight down into the ground as an end post. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-90-degree-handrail-bend-42mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 90 degree handrail bend for 42.4mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 42.4mm outside diameter (32NB, 1 1\/4 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCorners of guard rails round platforms, loading docks, walkways and car park edges; rail ends that turn down into the ground; post-and-rail barriers where a smooth corner looks better than a clamp.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSingle 90 degree bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eTwo legs, 500mm each, measured to the centre line of the other leg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.65kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-42-4mm\"\u003esplice lock for 42.4mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-42-4mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend-1\"\u003e90 Degree Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-38-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-stair-return-42mm-tube\"\u003e38 Degree Stair Return Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 42.4mm outside diameter, the same as standard 32NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700070261123,"sku":"SSHF-282435-01","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-90-degree-handrail-bend-42mm-loading-dock-corner.jpg?v=1794073566"},{"product_id":"galvanised-modular-rail-ramp-bend","title":"Galvanised 38 Degree Stair Handrail Bend for 33.7mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 33.7mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend takes a level galvanised tube handrail at the top of a flight smoothly down to follow the stair pitch, with no clamp or knuckle at the change of angle. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-38-degree-stair-handrail-bend-34mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 38 degree stair handrail bend for 33.7mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 33.7mm outside diameter (25NB, 1 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eTops and bottoms of external stairs at factories, schools and car parks; steps from footbridges and landings; park and estate steps where a level rail meets a sloping one.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e33.7mm outside diameter (25NB, 1 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSingle bend, level leg turning down 38 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eLevel leg 450mm to the start of the bend, sloping leg continues down at 38 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.95kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-33-7mm-tubing\"\u003esplice lock for 33.7mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-33-7mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-38-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend-1\"\u003e90 Degree Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 33.7mm outside diameter, the same as standard 25NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57700001743235,"sku":"SSHF-511811-01","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-38-degree-stair-handrail-bend-34mm-industrial-unit-steps.jpg?v=1794073567"},{"product_id":"galvanised-modular-rail-90-degree-bend-1","title":"Galvanised 90 Degree Handrail Bend for 33.7mm Tube, Modular Guard Rail","description":"\u003cp\u003e\u003cstrong\u003eA ready-made galvanised bend for 33.7mm tube handrails and guard rails.\u003c\/strong\u003e This one-piece bend turns a galvanised tube handrail or guard rail through a smooth right angle, either round a corner in plan or straight down into the ground as an end post. It is bent from the same galvanised tube as the rail, so the run looks continuous, with no bulky fittings and nothing to snag. Join it to straight tube with an internal splice lock, or weld it in and treat the weld with zinc-rich paint. The price shown is for one bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-90-degree-handrail-bend-34mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised 90 degree handrail bend for 33.7mm tube\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a pre-made bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and continuous.\u003c\/strong\u003e A bent tube looks cleaner than a clamped joint and leaves no edges for hands or clothing to catch on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo tube bender needed.\u003c\/strong\u003e The bend is made for you, so site work is just cutting straight tube and joining.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Hot-dip galvanised steel stands up to rain and frost with no painting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatches standard tube.\u003c\/strong\u003e 33.7mm outside diameter (25NB, 1 inch), the same as standard galvanised handrail and scaffold tube.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCorners of guard rails round platforms, loading docks, walkways and car park edges; rail ends that turn down into the ground; post-and-rail barriers where a smooth corner looks better than a clamp.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube\u003c\/th\u003e\n\u003ctd\u003e33.7mm outside diameter (25NB, 1 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eSingle 90 degree bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLegs\u003c\/th\u003e\n\u003ctd\u003eTwo legs, 500mm each, measured to the centre line of the other leg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003ePlain, cut square\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel tube, hot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.08kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the run, then cut the straight tube to length so each joint falls where you want it. Push an internal \u003ca href=\"\/products\/double-screw-splice-lock-33-7mm-tubing\"\u003esplice lock for 33.7mm tube\u003c\/a\u003e into the bend leg and the straight tube and tighten the grub screws, or weld the joint and dress it with zinc-rich paint. Legs can be cut shorter to suit, but keep enough straight tube each side of the bend for a joiner. Close any open tube ends with a \u003ca href=\"\/products\/premium-handrail-cap-end-for-33-7mm-tube\"\u003edomed end cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther modular bends\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-90-degree-bend\"\u003e90 Degree Handrail Bend, 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/galvanised-modular-rail-ramp-bend\"\u003e38 Degree Stair Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-modular-rail-platform-return-bend\"\u003ePlatform Return Handrail Bend, 33.7mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Treat cut ends, welds and scuffs with zinc-rich paint, and check joiner grub screws once a year on busy routes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It is 33.7mm outside diameter, the same as standard 25NB galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut the legs shorter?\u003c\/summary\u003e\u003cp\u003eYes. Cut the straight legs square and treat the cut with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre joiners included?\u003c\/summary\u003e\u003cp\u003eNo. Order splice locks separately, one for each joint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with the layout and we will list the bends, tube and joiners you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57699964518787,"sku":"SSHF-544579-01","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-90-degree-handrail-bend-34mm-treatment-works-walkway.jpg?v=1794073566"},{"product_id":"premium-90-degree-weld-bend-114-3mm-tube","title":"90 Degree Weld Bend for 114.3mm Tube, Mild Steel Elbow for Handrails, 3.6mm Wall","description":"\u003cp\u003e\u003cstrong\u003eA neat, strong 90 degree change of direction in 114.3mm tube.\u003c\/strong\u003e This raw steel elbow butt welds between two lengths of 114.3mm (100NB) tube, giving a smooth curve the same size as the tube instead of a sharp mitre or a squashed hand-bent tube. The ends are bevelled ready to weld. The price shown is for one weld bend.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/90-degree-weld-bend-114-3mm-size-guide.jpg?width=1200\" alt=\"Size guide for the 90 degree weld bend: 114.3mm outside diameter, 3.6mm wall, 148mm centre to face\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a weld bend\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNo mitres, no kinks.\u003c\/strong\u003e Bending tube by hand flattens it, and mitred joints leave sharp corners. A weld bend keeps the full round section through the turn.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTight turns.\u003c\/strong\u003e With 148mm from centre to face, it fits where a pipe bender cannot, such as the corner where a ramp handrail turns along a landing or returns to a wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to weld.\u003c\/strong\u003e Square cut, bevelled ends line up with the tube and give a full-strength butt weld.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinish it with the frame.\u003c\/strong\u003e Self colour steel takes paint, powder coat, galvanising or plating with the rest of the job.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eStair and ramp handrails, balustrade top rails, guard rails and protection barriers, street furniture, cycle stands and any tubular frame in 114.3mm tube.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 90 degree weld bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e114.3mm outside diameter (100NB, 4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e3.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentre to face\u003c\/th\u003e\n\u003ctd\u003e148mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnds\u003c\/th\u003e\n\u003ctd\u003eSquare cut and bevelled for butt welding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMild steel, self colour (unpainted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.19kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the tube ends square and deburr them. Line the bend up with each tube, tack weld at three or four points, check the angle, then weld right round. Grind the welds flush and dress them smooth so the hand slides over the joint without catching. Prime and paint, powder coat or galvanise the finished frame.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eRaw steel will rust if left bare, so finish the frame soon after welding and touch up chips outdoors.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bend?\u003c\/summary\u003e\u003cp\u003eYes, one weld bend.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 114.3mm tube with a thicker wall?\u003c\/summary\u003e\u003cp\u003eYes. The outside diameter matches all 114.3mm tube; the wall of the bend is 3.6mm, so the inside will step slightly on thicker tube, which makes no difference to an outside butt weld.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I make a U-turn or return?\u003c\/summary\u003e\u003cp\u003eYes. Two 90 degree bends welded back to back make a 180 degree return, for example at the end of a handrail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo you have other sizes?\u003c\/summary\u003e\u003cp\u003eYes: \u003ca href=\"\/products\/premium-90-degree-weld-bend-for-tubes\"\u003e90 degree bend for 101.6mm tube\u003c\/a\u003e, and more in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For larger quantities call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57627517452675,"sku":"SSHF-458883-01","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/90-degree-weld-bend-114-3mm-in-use.jpg?v=1794057752"}],"url":"https:\/\/industrialsuppliesco.co.uk\/collections\/iron-hardware-handrails-brackets.oembed?page=12","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}