{"title":"Handrails \u0026 Brackets","description":"","products":[{"product_id":"304-stainless-steel-handrail-bracket","title":"304 Stainless Steel Handrail Bracket with Flat Saddle for Timber Rails, 80mm Projection","description":"\u003cp\u003e\u003cstrong\u003eA 304 stainless wall bracket with a flat saddle, made to carry a timber or other flat-bottomed handrail indoors.\u003c\/strong\u003e A 60mm round plate screws to the wall, a 12mm round bar arm comes out 80mm and turns up, and the rail sits on a flat 63 x 25mm saddle and is screwed to it from below. It is the classic way to fix an oak, ash, walnut or other hardwood handrail to a wall on stairs and landings in homes, offices, schools and shops. Satin 304 is the grade for indoor and sheltered rails. The price shown is for one bracket, minimum order 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/304-handrail-bracket-flat-saddle-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the 304 handrail bracket with flat saddle: 60mm round wall plate 5mm thick with three 5mm holes on a 42mm circle, 12mm round bar, 80mm wall to saddle centre, 65mm to the saddle top, flat saddle 63 x 25 x 4mm with two 6mm holes at 42mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003ctd\u003eRound wall plate, bent 12mm round bar arm and flat saddle in one rigid piece, 304 stainless, satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eThe handrail, wall fixings and the screws into the rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy choose this bracket\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMade for timber rails.\u003c\/strong\u003e The saddle is flat, so a wooden rail with a flat underside sits on it fully and screws down tight. A curved saddle made for round tube would only touch a timber rail along a line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoom for your hand.\u003c\/strong\u003e The arm brings the rail 80mm off the wall to the saddle centre, so fingers can wrap round the rail without catching the wall, and the arm comes up from below so a hand slides the full length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe right grade for indoors.\u003c\/strong\u003e 304 stainless keeps its satin finish on indoor stairs and costs less than 316. For outdoor steps, coastal homes and pool areas choose the \u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket\"\u003e316 flat saddle bracket\u003c\/a\u003e, which resists salt, chlorine and damp far better.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel, satin finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall plate\u003c\/th\u003e\n\u003ctd\u003e60mm round, 5mm thick, three 5mm holes on a 42mm circle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003e12mm round bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall to saddle centre\u003c\/th\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate centre to top of saddle\u003c\/th\u003e\n\u003ctd\u003e65mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003eFlat, 63 x 25 x 4mm, two 6mm holes at 42mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bracket?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour rail\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimber or flat-bottomed rail, indoors\u003c\/td\u003e\n\u003ctd\u003eThis 304 flat saddle bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimber or flat-bottomed rail, outdoors or by the sea\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket\"\u003e316 flat saddle bracket\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm round stainless rail, indoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket-2\"\u003e304 bracket for 42.4mm rail\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48.3mm round stainless rail, indoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket-1\"\u003e304 bracket for 48.3mm rail\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound stainless rail on a stair, saddle tilting to the pitch\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/304-stainless-steel-adjustable-handrail-bracket\"\u003e304 adjustable bracket 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eMark a line on the wall for the top of the rail. The top of the saddle is 65mm above the centre of the plate, so set the plate centres 65mm plus the depth of the rail below that line. Fix the end brackets first, then the rest at even spacing, usually no more than about 1 metre apart, with three screws and plugs or anchors suited to the wall. Lay the rail on the saddles and fix it from below with two wood screws per bracket through the saddle holes. On a stair the rail sits at the pitch of the stair on each flat saddle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety.\u003c\/strong\u003e Handrail height, bracket spacing and fixings must suit the stair and the wall, to Approved Document K and BS 6180 where they apply.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWipe with warm soapy water and a soft cloth along the grain, then dry. Avoid chlorine bleach, wire wool and scouring pads, and use stainless screws so they do not leave rust marks on the bracket.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, one bracket. The minimum order is 5, enough for a typical flight of stairs.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many brackets do I need?\u003c\/summary\u003e\u003cp\u003eAllow one about every metre plus one near each end. A 3 metre rail usually takes 4.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it with a round stainless tube?\u003c\/summary\u003e\u003cp\u003eIt will hold one, but a round tube only touches the flat saddle along a line. For round tube use a bracket with a curved saddle for 42.4mm or 48.3mm rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre screws included?\u003c\/summary\u003e\u003cp\u003eNo. Use three wall screws and plugs or anchors to suit your wall, and two wood screws into the rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003e304 is fine under cover and away from salt and chlorine. For open outdoor steps, coastal sites and pools, the 316 flat saddle bracket keeps its finish far better.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with brackets and rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57980844802435,"sku":"SSHF-178115-01","price":11.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/304-handrail-bracket-flat-saddle-walnut-rail-townhouse-stair.jpg?v=1794097497"},{"product_id":"premium-stainless-steel-handrail-bracket","title":"316 Stainless Steel Handrail Bracket with Flat Saddle for Timber Rails, 80mm Projection","description":"\u003cp\u003e\u003cstrong\u003eA 316 stainless wall bracket with a flat saddle, made to carry a timber or other flat-bottomed handrail.\u003c\/strong\u003e A 60mm round plate screws to the wall, a 12mm round bar arm comes out 80mm and turns up, and the rail sits on a flat 63 x 25mm saddle and is screwed to it from below. It is the classic way to fix an oak, ash or hardwood handrail to a wall on stairs, landings and steps. Satin 316 suits outdoor, coastal and pool-side work as well as indoors. The price shown is for one bracket, minimum order 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-handrail-bracket-flat-saddle-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the 316 handrail bracket with flat saddle: 60mm round wall plate 5mm thick with three 5mm holes on a 42mm circle, 12mm round bar, 80mm wall to saddle centre, 65mm to the saddle top, flat saddle 63 x 25 x 4mm with two 6mm holes at 42mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003ctd\u003eRound wall plate, bent 12mm round bar arm and flat saddle, 316 stainless, satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eThe handrail, wall fixings and the screws into the rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy choose this bracket\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMade for timber rails.\u003c\/strong\u003e The saddle is flat, so a wooden rail with a flat underside sits on it fully and screws down tight. A curved saddle made for round tube would only touch a timber rail along a line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoom for your hand.\u003c\/strong\u003e The arm brings the rail 80mm off the wall, so fingers can wrap round the rail without catching the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e316 for anywhere.\u003c\/strong\u003e 316 stainless contains molybdenum, which gives it much better resistance to salt, chlorine and damp than 304, so it suits outdoor steps, coastal homes and pool areas as well as indoor stairs. For indoor-only work the \u003ca href=\"\/products\/304-stainless-steel-handrail-bracket\"\u003e304 flat saddle bracket\u003c\/a\u003e costs less.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e316 stainless steel, satin finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall plate\u003c\/th\u003e\n\u003ctd\u003e60mm round, 5mm thick, three 5mm holes on a 42mm circle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003e12mm round bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall to saddle centre\u003c\/th\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate centre to top of saddle\u003c\/th\u003e\n\u003ctd\u003e65mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003eFlat, 63 x 25 x 4mm, two 6mm holes at 42mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bracket?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour rail\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimber or flat-bottomed rail, indoors or out\u003c\/td\u003e\n\u003ctd\u003eThis 316 flat saddle bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimber or flat-bottomed rail, indoors only\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/304-stainless-steel-handrail-bracket\"\u003e304 flat saddle bracket\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm round stainless rail, outdoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-handrail-bracket\"\u003e316 bracket for 42.4mm rail\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm round stainless rail, indoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket-2\"\u003e304 bracket for 42.4mm rail\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eMark a line on the wall for the top of the rail, allowing for the saddle height. Fix the end brackets first, then the rest at even spacing, usually no more than about 1 metre apart, with three screws and plugs or anchors suited to the wall. Lay the rail on the saddles and fix it from below with two wood screws per bracket through the saddle holes. On a stair the rail sits at the pitch of the stair on each flat saddle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety.\u003c\/strong\u003e Handrail height, bracket spacing and fixings must suit the stair and the wall, to Approved Document K and BS 6180 where they apply.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWipe with warm soapy water and a soft cloth along the grain, then dry. Outdoors, rinse with fresh water now and then, more often near the sea or a pool. Avoid chlorine bleach, wire wool and scouring pads.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, one bracket. The minimum order is 5, enough for a typical flight of stairs.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it with a round stainless tube?\u003c\/summary\u003e\u003cp\u003eIt will hold one, but a round tube only touches the flat saddle along a line. For 42.4mm tube use a bracket with a curved saddle.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre screws included?\u003c\/summary\u003e\u003cp\u003eNo. Use three wall screws and plugs or anchors to suit your wall, and two wood screws into the rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eYes, that is what 316 is for. Rinse it with fresh water now and then.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with brackets and rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57980984852867,"sku":"SSHF-243651-01","price":14.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-handrail-bracket-flat-saddle-oak-stair-rail.jpg?v=1794055441"},{"product_id":"premium-grp-handrail-fitting-side-support","title":"Yellow GRP Handrail Side Support for 50mm Tube, Side Fixing Post Base for Stairs and Walkways","description":"\u003cp\u003e\u003cstrong\u003eFixes a yellow GRP handrail post to the side of a stair or walkway.\u003c\/strong\u003e This moulded yellow GRP base bolts flat to the side face of a stair stringer, ramp or walkway edge. A half-round channel down its face takes the bottom of a 50mm GRP post, and the closed bottom carries the post. Tightening the four bolts pinches the post in place, so nothing stands on the treads or walkway. The price shown is for one support, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-side-support-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP side support\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eClear treads.\u003c\/strong\u003e The post fixes to the side, keeping the full walking width.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePinch fit.\u003c\/strong\u003e The post is held by clamping, with no hole through the tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed base.\u003c\/strong\u003e The post sits on the bottom of the channel and cannot slide through.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e Moulded GRP, fixed cold with a drill and spanner.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSide fixed posts on stairs, ramps, walkways and platform edges in yellow GRP handrail at water and wastewater treatment works, chemical plants, rail depots, food factories and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne side support, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate\u003c\/th\u003e\n\u003ctd\u003e150 x 130mm, 14mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e4 x 11mm, at 90mm and 100mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProjection\u003c\/th\u003e\n\u003ctd\u003e61mm from the fixing face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBolts\u003c\/th\u003e\n\u003ctd\u003eNot included; choose to suit the substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.59kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these parts belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003eDo not overtighten\u003c\/h2\u003e\n\u003cp\u003eThe support grips the post by being clamped to the face behind it. Use spacer washers under the bolt heads so the plate is not bent, and tighten evenly until the post is held. Overtightening can crack the moulding.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-fitting-1\"\u003eTriangular base flange, for floor fixed posts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eShort tee, rail to post\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003eTube: 5000mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003eTube: 3500mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/professional-grp-handrail-end-post\"\u003eEnd post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003eCorner post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eHold the support against the side of the stair with the post in its channel and the post plumb. Mark through the four holes, drill and fit bolts or anchors to suit the concrete or steel, with spacer washers. Tighten evenly until the post is gripped.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one support?\u003c\/summary\u003e\u003cp\u003eYes, one side support. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre bolts included?\u003c\/summary\u003e\u003cp\u003eNo. The right bolt depends on the stair: resin anchors into concrete, or through bolts into steel.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the post need drilling?\u003c\/summary\u003e\u003cp\u003eNo. The support holds the post by clamping it.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with the lengths, corners, stairs and openings: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every post, tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":58010985464195,"sku":"SSHF-913667-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-side-support-50mm-lead.jpg?v=1794082712"},{"product_id":"premium-handrail-bracket-78mm-projection","title":"316 Stainless Steel Handrail Bracket for 48.3mm Tube, 78mm to Rail Centre","description":"\u003cp\u003e\u003cstrong\u003eA clean, simple 316 stainless wall bracket for a 48.3mm handrail.\u003c\/strong\u003e The curved saddle is fixed, ideal for level runs along corridors, ramps and walls. It holds the rail centre 78mm off the wall, leaving room for a hand to wrap round the rail. Solid 316 marine-grade stainless steel with a satin finish, the grade to choose outdoors and near the coast. The price shown is for one bracket, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-handrail-bracket-48mm-78mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the 316 handrail bracket: 60mm wall plate, 78mm to rail centre, 62 x 25mm saddle 70mm high\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this bracket\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRoom for your hand.\u003c\/strong\u003e 78mm from wall to rail centre leaves about 54mm of clear space behind a 48.3mm rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMarine-grade steel.\u003c\/strong\u003e 316 stainless resists salt and pollution, for outdoor ramps, coastal buildings and pools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSlim and tidy.\u003c\/strong\u003e A 12mm arm and a 60mm round wall plate keep the bracket discreet under the rail.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eLevel wall handrails in hospital and care home corridors, schools, offices and hotels; outdoor ramps and paths beside walls; swimming pools and leisure centres.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne handrail bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits handrail\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter round tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall to rail centre\u003c\/th\u003e\n\u003ctd\u003e78mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle height\u003c\/th\u003e\n\u003ctd\u003e70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003eFixed, curved, 62 x 25mm, 2 holes 6mm at 42mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall plate\u003c\/th\u003e\n\u003ctd\u003e60mm round, 5mm thick, 3 holes on 42mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003e12mm round bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e316 stainless steel, satin finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.26kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eNot included: choose wall fixings to suit your wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eSpace brackets about 1m apart or closer, with one within about 300mm of each end of the rail.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eHandrail length\u003c\/th\u003e\n\u003cth\u003eBrackets\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 2m\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3m\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4m\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6m\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eMatching parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandrail: \u003ca href=\"\/products\/premium-stainless-steel-tube-48-3mm-x-2-0mm\"\u003e316 stainless tube 48.3 x 2.0mm, 3m\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRail ends: \u003ca href=\"\/products\/premium-handrail-end-for-48-3mm-tube\"\u003e316 handrail end for 48.3 x 2mm tube\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor stairs: \u003ca href=\"\/products\/316-stainless-steel-adjustable-handrail-bracket\"\u003e316 adjustable bracket, saddle tilts to the pitch\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndoors on a budget: \u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket-1\"\u003e304 bracket for 48.3mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eMark the rail line on the wall, fix the end brackets first, string a line between them and fix the rest to it with three screws each. Lay the rail in the saddles and screw up through the two saddle holes into the rail.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eClean the stainless after installation and wash it down regularly, more often near the coast. Remove any brown tea staining with a mild acid cleaner such as white vinegar, or a stainless steel cleaner, on a microfibre cloth.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, one bracket. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it on a stair?\u003c\/summary\u003e\u003cp\u003eThe saddle is fixed for level runs. On stairs, the \u003ca href=\"\/products\/316-stainless-steel-adjustable-handrail-bracket\"\u003eadjustable bracket\u003c\/a\u003e tilts to the pitch.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outdoors?\u003c\/summary\u003e\u003cp\u003eYes. 316 is the stainless grade recommended outdoors and near the sea.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre screws included?\u003c\/summary\u003e\u003cp\u003eNo. Choose fixings to suit your wall.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online with Express UK Delivery. For a full handrail with tube, ends and brackets, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list everything you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":58010907640195,"sku":"SSHF-143043-01","price":14.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-handrail-bracket-48mm-78mm-hospital-corridor.jpg?v=1794048734"},{"product_id":"premium-stainless-steel-handrail-bracket-1","title":"304 Stainless Steel Handrail Bracket for 48.3mm Rail, Fixed Saddle, 78mm Projection","description":"\u003cp\u003e\u003cstrong\u003eA 304 stainless wall bracket that carries a 48.3mm round handrail on internal stairs, landings and corridors.\u003c\/strong\u003e It is one rigid part: a 60mm round plate that screws to the wall, a 12mm round bar arm and a curved saddle the rail sits in, holding the rail 78mm from the wall to its centre. With no pivot or loose screws it stays put once fixed. Satin 304 is the grade for indoor and sheltered rails. The price shown is for one bracket, minimum order 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/304-fixed-handrail-bracket-48mm-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the 304 fixed handrail bracket for 48.3mm rail: 60mm wall plate with three 5mm holes on a 42mm circle, 12mm arm, 78mm wall to rail centre, saddle top 70mm above the plate centre, saddle 62 x 25mm with two 6mm holes at 42mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003ctd\u003eRound wall plate, 12mm bent round bar arm and fixed saddle, 304 stainless, satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003eCurved to sit under a 48.3mm round rail, with two screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eThe handrail, wall fixings and the screws into the rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy choose this bracket\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSimple and solid.\u003c\/strong\u003e The saddle is fixed to the arm, so there is nothing to adjust or work loose. On level rails along landings and corridors the saddle lies flat along the rail. On a stair the rail meets the fixed saddle at the stair angle and is held by its two screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoom for a full grip.\u003c\/strong\u003e The arm comes up from below the rail, so a hand can slide the whole length without hitting the bracket, and the 78mm stand-off leaves space for knuckles between the rail and the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe right grade for indoors.\u003c\/strong\u003e 304 stainless keeps its satin finish in schools, offices, care homes and flats. For outdoor rails, especially by the sea or a pool, choose the \u003ca href=\"\/products\/premium-handrail-bracket-78mm-projection\"\u003e316 bracket for 48.3mm rail\u003c\/a\u003e, which resists salt and chlorine far better.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel, satin finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e48.3mm round handrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall plate\u003c\/th\u003e\n\u003ctd\u003e60mm round, 5mm thick, three 5mm holes on a 42mm circle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003e12mm round bar, bent through 90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall to rail centre\u003c\/th\u003e\n\u003ctd\u003e78mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate centre to top of saddle\u003c\/th\u003e\n\u003ctd\u003e70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003e62 x 25mm, 4mm thick, curved, two 6mm holes at 42mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bracket?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e48.3mm rail, indoors\u003c\/td\u003e\n\u003ctd\u003eThis 304 bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48.3mm rail, outdoors or by the sea\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-handrail-bracket-78mm-projection\"\u003e316 bracket 48.3mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm rail, indoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket-2\"\u003e304 bracket 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm rail, outdoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-handrail-bracket\"\u003e316 bracket 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA timber or square rail with a flat underside\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/304-stainless-steel-handrail-bracket\"\u003e304 bracket with flat saddle\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBrackets are usually spaced no more than about 1 metre apart, with one close to each end of the rail; follow your designer where the rail must take guarding loads. Mark the line of the rail on the wall at the height you need. The top of the saddle is 70mm above the centre of the plate and the rail centre about 94mm above it, so set the plates that far below the rail line. Fix each plate with three screws and plugs or anchors to suit the wall, lay the rail on the saddles, and fix it to each saddle with two short screws from below into pre-drilled holes.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWipe along the grain with warm soapy water and a soft cloth, then dry. Avoid chlorine bleach, wire wool and scouring pads, and use stainless screws so they do not leave rust marks on the bracket.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, one bracket. The minimum order is 5, which covers a rail of about 4 metres.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many brackets do I need?\u003c\/summary\u003e\u003cp\u003eAllow one about every metre plus one near each end. A 3 metre rail usually takes 4.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre screws included?\u003c\/summary\u003e\u003cp\u003eNo. Choose wall fixings to suit the wall, and use short stainless screws through the saddle into the rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit a 42.4mm rail?\u003c\/summary\u003e\u003cp\u003eThe saddle is curved for 48.3mm, so a 42.4mm rail will not sit snugly. Use the 304 bracket for 42.4mm rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003e304 is fine under cover and away from salt and chlorine. For open outdoor rails, coastal sites and pools, the 316 version keeps its finish far better.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with tube, bends and end caps, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":58010904723843,"sku":"SSHF-306883-01","price":11.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/304-fixed-handrail-bracket-48mm-hospital-stair-rail.jpg?v=1794056739"},{"product_id":"heavy-duty-handrail-bracket","title":"316 Stainless Steel Fixed Handrail Bracket, 78mm Projection, 42.4mm Tube","description":"\u003cp\u003e\u003cstrong\u003e316 stainless steel fixed handrail bracket with a 78mm projection, for 42.4mm round tube. Holds a wall mounted handrail a comfortable distance from the wall.\u003c\/strong\u003e The price shown is for one bracket, with a minimum order of 5.\u003c\/p\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e316 grade.\u003c\/strong\u003e Marine grade stainless for outdoor, coastal and wet areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e78mm projection.\u003c\/strong\u003e Room for the hand to grip the rail without touching the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeat fixing.\u003c\/strong\u003e Wall plate and saddle in one simple bracket.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eWall mounted handrails on stairs, ramps, walkways and entrances.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrade\u003c\/th\u003e\n\u003ctd\u003e316 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandrail\u003c\/th\u003e\n\u003ctd\u003e42.4mm round tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProjection\u003c\/th\u003e\n\u003ctd\u003e78mm from the wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eWall mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow to use it\u003c\/h2\u003e\n\u003cp\u003eFix the wall plate with fixings to suit the wall, then fix the handrail into the saddle.\u003c\/p\u003e\n\u003ch2\u003eChoose the right one\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e316 Stainless Steel Fixed Handrail Bracket, 78mm Projection, 42.4mm Tube\u003c\/td\u003e\n\u003ctd\u003e£14.90\u003c\/td\u003e\n\u003ctd\u003eThis one\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e316 Stainless Steel Adjustable Handrail Bracket, 42.4mm Post to 42.4mm Handrail\u003c\/td\u003e\n\u003ctd\u003e£35.90\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/adjustable-handrail-tube-bracket-42-4mm\"\u003eView\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e304 Stainless Steel Adjustable Handrail Bracket, 48.3mm Post to 42.4mm Handrail\u003c\/td\u003e\n\u003ctd\u003e£21.90\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/adjustable-handrail-tube-bracket\"\u003eView\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e304 Stainless Steel Adjustable Handrail Bracket, 42.4mm Post to 42.4mm Handrail\u003c\/td\u003e\n\u003ctd\u003e£21.90\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/adjustable-handrail-tube-bracket-42-4mm-1\"\u003eView\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e304 Stainless Steel Adjustable Handrail Bracket, Flat Back, 42.4mm Handrail\u003c\/td\u003e\n\u003ctd\u003e£20.90\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-adjustable-handrail-bracket-4\"\u003eView\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e316 Stainless Steel Adjustable Handrail Bracket, Flat Post, 42.4mm Handrail\u003c\/td\u003e\n\u003ctd\u003e£35.90\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-adjustable-handrail-tube-bracket-1\"\u003eView\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, it is for one bracket, with a minimum order of 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs 304 or 316 right for my job?\u003c\/summary\u003e\u003cp\u003e304 suits indoor and sheltered areas. Choose 316 for outdoor, coastal, pool and wet areas. Call 01744 520 110 if you are not sure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":58010898956675,"sku":"SSHF-536259-01","price":14.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/316-stainless-steel-fixed-handrail-bracket-78mm-projection-42-4mm-tube-installed.jpg?v=1794094581"},{"product_id":"premium-stainless-steel-handrail-bracket-2","title":"304 Stainless Steel Handrail Bracket for 42.4mm Rail, Fixed Saddle, 78mm Projection","description":"\u003cp\u003e\u003cstrong\u003eA 304 stainless wall bracket that carries a 42.4mm round handrail on internal stairs, landings and corridors.\u003c\/strong\u003e It is one rigid part: a 60mm round plate that screws to the wall, a 12mm round bar arm and a curved saddle the rail sits in, holding the rail 78mm from the wall to its centre. With no pivot or loose screws it stays put once fixed. Satin 304 is the grade for indoor and sheltered rails. The price shown is for one bracket, minimum order 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/304-fixed-handrail-bracket-42mm-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the 304 fixed handrail bracket for 42.4mm rail: 60mm wall plate with three 5mm holes on a 42mm circle, 12mm arm, 78mm wall to rail centre, saddle top 70mm above the plate centre, saddle 62 x 25mm with two 6mm holes at 42mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003ctd\u003eRound wall plate, 12mm bent round bar arm and fixed saddle, 304 stainless, satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003eCurved to sit under a 42.4mm round rail, with two screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eThe handrail, wall fixings and the screws into the rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhy choose this bracket\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSimple and solid.\u003c\/strong\u003e The saddle is fixed to the arm, so there is nothing to adjust or work loose. On level rails along landings and corridors the saddle lies flat along the rail. On a stair the rail meets the fixed saddle at the stair angle and is held by its two screws; if you want the saddle to lie flat along a pitched rail, use the \u003ca href=\"\/products\/304-stainless-steel-adjustable-handrail-bracket\"\u003e304 adjustable bracket for 42.4mm rail\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoom for a full grip.\u003c\/strong\u003e The arm comes up from below the rail, so a hand can slide the whole length without hitting the bracket, and the 78mm stand-off leaves space for knuckles between the rail and the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe right grade for indoors.\u003c\/strong\u003e 304 stainless keeps its satin finish in schools, offices, care homes and flats. For outdoor rails, especially by the sea or a pool, choose the \u003ca href=\"\/products\/heavy-duty-handrail-bracket\"\u003e316 bracket for 42.4mm rail\u003c\/a\u003e, which resists salt and chlorine far better.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel, satin finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e42.4mm round handrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall plate\u003c\/th\u003e\n\u003ctd\u003e60mm round, 5mm thick, three 5mm holes on a 42mm circle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003e12mm round bar, bent through 90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall to rail centre\u003c\/th\u003e\n\u003ctd\u003e78mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate centre to top of saddle\u003c\/th\u003e\n\u003ctd\u003e70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003e62 x 25mm, 4mm thick, curved, two 6mm holes at 42mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eIs this the right bracket?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm rail, indoors\u003c\/td\u003e\n\u003ctd\u003eThis 304 bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm rail, outdoors or by the sea\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-handrail-bracket\"\u003e316 bracket 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48.3mm rail, indoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-handrail-bracket-1\"\u003e304 bracket 48.3mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48.3mm rail, outdoors\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-handrail-bracket-78mm-projection\"\u003e316 bracket 48.3mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA saddle that tilts to the stair pitch\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/304-stainless-steel-adjustable-handrail-bracket\"\u003e304 adjustable bracket 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA timber or square rail with a flat underside\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/304-stainless-steel-handrail-bracket\"\u003e304 bracket with flat saddle\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBrackets are usually spaced no more than about 1 metre apart, with one close to each end of the rail; follow your designer where the rail must take guarding loads. Mark the line of the rail on the wall at the height you need. The top of the saddle is 70mm above the centre of the plate and the rail centre about 91mm above it, so set the plates that far below the rail line. Fix each plate with three screws and plugs or anchors to suit the wall, lay the rail on the saddles, and fix it to each saddle with two short screws from below into pre-drilled holes.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWipe along the grain with warm soapy water and a soft cloth, then dry. Avoid chlorine bleach, wire wool and scouring pads, and use stainless screws so they do not leave rust marks on the bracket.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, one bracket. The minimum order is 5, which covers a rail of about 4 metres.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many brackets do I need?\u003c\/summary\u003e\u003cp\u003eAllow one about every metre plus one near each end. A 3 metre rail usually takes 4.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre screws included?\u003c\/summary\u003e\u003cp\u003eNo. Choose wall fixings to suit the wall, and use short stainless screws through the saddle into the rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit a 48.3mm rail?\u003c\/summary\u003e\u003cp\u003eNo, the saddle is curved for 42.4mm. Use the 304 bracket for 48.3mm rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003e304 is fine under cover and away from salt and chlorine. For open outdoor rails, coastal sites and pools, the 316 version keeps its finish far better.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with tube, bends and end caps, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":58010857701763,"sku":"SSHF-863939-01","price":11.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/304-fixed-handrail-bracket-42mm-school-stair-wall-rail.jpg?v=1794046781"},{"product_id":"premium-side-through-rail-support","title":"Black Key Clamp Side Through Rail Support for 26.9mm Tube, Wall Handrail Bracket, Indoor, Size A","description":"\u003cp\u003e\u003cstrong\u003eA black wall bracket for 26.9mm tube: the tube passes straight through the ring, and the flat base screws to a wall, a panel or a kick plate.\u003c\/strong\u003e The ring sits on a short stem 54mm out from the base, so a handrail clears the wall comfortably, and one hex socket grub screw locks the tube at any point along its length. The base is 77 x 44mm with two 7mm screw holes at 57mm centres. Use it to hold a slim black handrail along a wall, tie a tube frame back to a wall, mount display panels, or fix a kick plate to guardrail uprights. The black electrophoretic finish is for indoor use. The price shown is for one support, with a minimum order of 10.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-key-clamp-side-through-rail-support-26-9mm-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the black 26.9mm key clamp side through rail support, 54mm from base to tube centre with a 77 x 44mm base\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy fitters use it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe rail runs straight through.\u003c\/strong\u003e Unlike an end bracket, the tube passes through the ring, so one length of rail can be carried by as many supports as you need along a wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClear of the wall.\u003c\/strong\u003e The 54mm stem holds the tube far enough out for a hand to grip the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirm, flat fixing.\u003c\/strong\u003e The wide base takes two screws, so the bracket stays square on plaster, timber or a steel kick plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack to match black frames.\u003c\/strong\u003e It matches black key clamp tube and fittings for a clean, industrial look indoors.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSlim handrails along stairs, corridors and ramps inside cafés, shops, offices and homes; tying black tube shelving and display frames back to walls; mounting exhibition and display panels; and fixing kick plates to the uprights of indoor guardrails.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne side through rail support, minimum order 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e26.9mm outside diameter (size A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase to tube centre\u003c\/th\u003e\n\u003ctd\u003e54mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase size\u003c\/th\u003e\n\u003ctd\u003e77 x 44mm, 7mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, 7mm, at 57mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrub screw\u003c\/th\u003e\n\u003ctd\u003eOne hex socket screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack electrophoretic coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.33 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eSupports\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall handrail, per metre of rail\u003c\/td\u003e\n\u003ctd\u003e1, plus 1 at each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2m handrail\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3m handrail\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTie-back for a tube frame\u003c\/td\u003e\n\u003ctd\u003e2 per frame, top and middle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eKeep supports no more than 1 metre apart on a handrail, and finish the rail ends with end caps.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right size\u003c\/h2\u003e\n\u003cp\u003eThis support takes 26.9mm tube, often sold as 3\/4\" or 20mm nominal bore. For 33.7mm tube, use the \u003ca href=\"\/products\/premium-side-through-rail-support-key-clamp\"\u003eblack side through rail support for 33.7mm tube\u003c\/a\u003e. Finish the rail with a black \u003ca href=\"\/products\/premium-metal-end-cap-26-9mm-tube\"\u003e26.9mm end cap\u003c\/a\u003e, turn corners with a black \u003ca href=\"\/products\/premium-90-degree-elbow-key-clamp\"\u003e90° elbow\u003c\/a\u003e, and use the black \u003ca href=\"\/products\/premium-square-base-wall-flange-for-26-9mm-tube\"\u003esquare base wall flange\u003c\/a\u003e where a rail ends square into a wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot a guardrail base.\u003c\/strong\u003e This bracket is not designed to be the only support for a free-standing guardrail or other loaded structure. Use base flanges for guardrail posts.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark the rail line on the wall, hold each support in place and mark the two holes. Drill and fix with screws and plugs to suit the wall (not included). Slide the rail through the rings, set it level and tighten each grub screw with a hex key. Wipe clean with a damp cloth and touch up chips with black paint. The electrophoretic coat is for indoor use only.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one support?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one support, with a minimum order of 10.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre screws included?\u003c\/summary\u003e\u003cp\u003eNo. Use screws and plugs to suit your wall through the two 7mm holes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the rail pass through or end in it?\u003c\/summary\u003e\u003cp\u003eThe rail passes straight through the ring, so supports can be fitted anywhere along one length of tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eNo. The black electrophoretic finish is for indoor use. Use galvanised fittings outdoors.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail or mixed fittings, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":58007151903107,"sku":"SSHF-368963-01","price":6.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-key-clamp-side-through-rail-support-26-9mm-wall-handrail.jpg?v=1794096045"},{"product_id":"heavy-duty-galvanised-steel-tube-1500mm","title":"Galvanised Steel Tube, 33.7mm OD x 2.6mm Wall, 1500mm Length, for Key Clamp Handrails","description":"\u003cp\u003e\u003cstrong\u003eA 1500mm length of galvanised steel tube, 33.7mm outside diameter with a 2.6mm wall, for slim key clamp handrails, guard rails and frames.\u003c\/strong\u003e This is the tube size for 33.7mm key clamp fittings, galvanised for outdoor use and supplied with square cut ends. A 1.5m length is easy to carry and handle, and suits short handrail runs, uprights, gate frames and repairs without cutting a longer length down. Each length weighs about 2.9 kg.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-tube-33x2-1500-drawing.jpg?width=1200\" alt=\"Dimension drawing of the galvanised steel tube: 33.7mm outside diameter, 2.6mm wall, 1500mm long\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this tube\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMade for key clamp fittings.\u003c\/strong\u003e 33.7mm is the outside diameter that 33.7mm key clamp tees, elbows, flanges and crosses are made to fit, so the fittings grub-screw straight on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA slimmer, lighter rail.\u003c\/strong\u003e 33.7mm sits comfortably in the hand and is lighter to handle than 42.4mm, with a 2.6mm wall that still takes key clamp grub screws firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e The zinc finish protects the tube on ramps, steps, barriers and frames out in the weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA handy 1.5m length.\u003c\/strong\u003e Short enough to carry in a car and handle on your own, long enough for uprights and short rails.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eHandrails on steps and ramps, guard rails and edge protection, barriers and pedestrian guards, frames for staging, shelving, benches and greenhouses, gate frames, and general fabrication and repairs.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 1500mm length of tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e33.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1500mm, square cut ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e33.7mm key clamp fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 2.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eOther lengths and sizes\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou want\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e33.7mm galvanised tube, 1500mm\u003c\/td\u003e\n\u003ctd\u003eThis tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e33.7mm galvanised tube, 1060mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-galvanised-tube-1060mm\"\u003eGalvanised tube, 33.7mm x 1060mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm galvanised tube, 1500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-galvanised-steel-tube-1500mm-1\"\u003eGalvanised tube, 42.4mm x 1500mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48.3mm galvanised tube, 1500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-galvanised-steel-tube-1500mm\"\u003eGalvanised tube, 48.3mm x 1500mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings to join the tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/sc-galvanised-key-clamp-fittings-handrails\"\u003eGalvanised key clamp fittings\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCutting and fitting\u003c\/h2\u003e\n\u003cp\u003eMeasure the run and cut the tube square with a pipe cutter, cold saw or hacksaw, then deburr the end and treat the bare steel with zinc-rich paint. Slide the key clamp fittings on, set the rails level and the uprights plumb, and tighten the grub screws with an Allen key.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one length?\u003c\/summary\u003e\u003cp\u003eYes, for one 1500mm length. For larger quantities, call us for a quantity price.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich key clamp fittings fit this tube?\u003c\/summary\u003e\u003cp\u003eFittings made for 33.7mm outside diameter tube. They are often listed as 33.7mm or 1 inch nominal bore.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut it?\u003c\/summary\u003e\u003cp\u003eYes. Cut it square, deburr it and touch up the cut end with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57102065729923,"sku":"SSHF-644611-01","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-tube-33x2-1500-garden-handrail.jpg?v=1794114295"},{"product_id":"heavy-duty-galvanised-steel-tube-1500mm-1","title":"Galvanised Steel Tube, 42.4mm OD x 3.2mm Wall, 1500mm Length, for Key Clamp Handrails","description":"\u003cp\u003e\u003cstrong\u003eA 1500mm length of heavy galvanised steel tube, 42.4mm outside diameter with a 3.2mm wall, for key clamp handrails, barriers and frames.\u003c\/strong\u003e This is the standard tube size for 42.4mm key clamp fittings, galvanised for outdoor use and supplied with square cut ends. A 1.5m length is easy to carry and handle, and suits short handrail runs, uprights, gate frames and repairs without cutting a longer length down. Each length weighs about 4.3 kg.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-tube-42x3-1500-drawing.jpg?width=1200\" alt=\"Dimension drawing of the galvanised steel tube: 42.4mm outside diameter, 3.2mm wall, 1500mm long\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this tube\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMade for key clamp fittings.\u003c\/strong\u003e 42.4mm is the outside diameter that 42.4mm key clamp tees, elbows, flanges and crosses are made to fit, so the fittings grub-screw straight on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy 3.2mm wall.\u003c\/strong\u003e A thick wall gives a rigid handrail and takes the grub screws of key clamp fittings without crushing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e The zinc finish protects the tube on ramps, steps, barriers and frames out in the weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA handy 1.5m length.\u003c\/strong\u003e Short enough to carry in a car and handle on your own, long enough for uprights and short rails.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eHandrails on steps and ramps, guard rails and edge protection, barriers and pedestrian guards, frames for staging, shelving, benches and greenhouses, gate frames, and general fabrication and repairs.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 1500mm length of tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e42.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e3.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1500mm, square cut ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e42.4mm key clamp fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 4.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eOther lengths and sizes\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou want\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm galvanised tube, 1500mm\u003c\/td\u003e\n\u003ctd\u003eThis tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm galvanised tube, 1060mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-galvanised-steel-tube\"\u003eGalvanised tube, 42.4mm x 1060mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e42.4mm galvanised tube, 3500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/galvanised-steel-tube-3500mm\"\u003eGalvanised tube, 42.4mm x 3.5m\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e33.7mm galvanised tube, 1500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-galvanised-steel-tube-1500mm\"\u003eGalvanised tube, 33.7mm x 1500mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48.3mm galvanised tube, 1500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-galvanised-steel-tube-1500mm\"\u003eGalvanised tube, 48.3mm x 1500mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFittings to join the tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/sc-galvanised-key-clamp-fittings-handrails\"\u003eGalvanised key clamp fittings\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCutting and fitting\u003c\/h2\u003e\n\u003cp\u003eMeasure the run and cut the tube square with a pipe cutter, cold saw or hacksaw, then deburr the end and treat the bare steel with zinc-rich paint. Slide the key clamp fittings on, set the rails level and the uprights plumb, and tighten the grub screws with an Allen key.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one length?\u003c\/summary\u003e\u003cp\u003eYes, for one 1500mm length. For larger quantities, call us for a quantity price.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich key clamp fittings fit this tube?\u003c\/summary\u003e\u003cp\u003eFittings made for 42.4mm outside diameter tube. They are often listed as 42.4mm or 1 1\/4 inch nominal bore.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut it?\u003c\/summary\u003e\u003cp\u003eYes. Cut it square, deburr it and touch up the cut end with zinc-rich paint.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57102065762691,"sku":"SSHF-677379-01","price":35.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-tube-42x3-1500-handrail-steps.jpg?v=1794113469"},{"product_id":"premium-adjustable-handrail-bracket","title":"Galvanised Adjustable Handrail Bracket for 42.4mm Tube, Threaded Stud Wall Fixing","description":"\u003cp\u003e\u003cstrong\u003eA simple galvanised wall bracket for 42.4mm tube handrails.\u003c\/strong\u003e The bracket is a 12mm round steel bar cranked to lift the rail clear of the wall, with a curved saddle on top that fits 42.4mm tube and two 6mm holes to screw the rail to it. The wall end is a threaded stud with nuts and a washer plate, so the distance from the wall can be set on site. Hot-dip galvanised for outdoor use. The price shown is for one bracket, with a minimum order of 10.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-adjustable-handrail-bracket-42mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the galvanised adjustable handrail bracket\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable reach.\u003c\/strong\u003e Set the rail distance from the wall on the threaded stud.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised.\u003c\/strong\u003e Hot-dip galvanised to match galvanised tube outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHand clearance.\u003c\/strong\u003e The cranked arm lifts the rail above the bracket so a hand can slide along it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow cost.\u003c\/strong\u003e A plain, strong bracket for long runs of wall rail.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eWall handrails beside external steps and ramps at schools, offices, car parks and public buildings, and in plant rooms and stairwells.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne bracket with nuts and washers, minimum order 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32mm nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSaddle\u003c\/th\u003e\n\u003ctd\u003e70 x 40mm, curved, 2 x 6mm screw holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBar\u003c\/th\u003e\n\u003ctd\u003e12mm round steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eArm\u003c\/th\u003e\n\u003ctd\u003e95mm reach, 60mm rise to the saddle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixing\u003c\/th\u003e\n\u003ctd\u003e60mm threaded stud with nuts and washer plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.28kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRelated brackets\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/mild-steel-handrail-bracket\"\u003eGalvanised handrail bracket with wall plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/90-degree-handrail-mounting-bracket-42-4mm-tube\"\u003eKey clamp wall bracket for 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-support-plate-42-4mm\"\u003eHandrail support plate for 42.4mm tube\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eMark the bracket positions along the wall to suit the rail length and the wall. Drill the wall and set each threaded stud with a resin anchor or through fixing to suit the wall. Set the reach with the nuts against the washer plate, lay the tube in the saddles and screw it on through the 6mm holes.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Touch in any cut or scuffed steel with cold galvanising paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, one bracket. The minimum order is 10.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it fit 48.3mm tube?\u003c\/summary\u003e\u003cp\u003eNo. The saddle is curved for 42.4mm tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre wall anchors included?\u003c\/summary\u003e\u003cp\u003eNo. Choose a resin anchor or fixing to suit the wall.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a long wall rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list the tube, brackets and ends.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":58003063079299,"sku":"SSHF-346243-01","price":3.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-adjustable-handrail-bracket-42mm-wall-steps.jpg?v=1794084510"},{"product_id":"heavy-duty-handrail-bracket-25mm","title":"Black Square Key Clamp Handrail Bracket for 25mm Box Section, Wall or Upright Fixing","description":"\u003cp\u003e\u003cstrong\u003eFix a 25mm square box section rail to a wall or upright.\u003c\/strong\u003e This black malleable iron key clamp has a flat wall plate with two bolt holes and a square socket that a 25 x 25mm box section rail passes straight through, locked by a hex grub screw. Use it to fix a handrail to a wall, tie a key clamp structure back to a wall, or fix kick plates to uprights. The black electrophoretic finish is for indoor use only. The price shown is for one bracket, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-square-key-clamp-handrail-bracket-25mm-size-guide.jpg?width=1200\" alt=\"Key facts for the black square key clamp handrail bracket for 25mm box section\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRail runs straight through.\u003c\/strong\u003e The socket is open both ends, so one continuous rail passes every bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding.\u003c\/strong\u003e Fit with a hex key and two wall bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSquare section look.\u003c\/strong\u003e Made for 25mm square box section, for a crisp modern rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart black.\u003c\/strong\u003e A satin black finish for offices, shops and showrooms.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eIndoor wall handrails, display rails and guard rails in offices, shops, showrooms and public buildings.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003e25 x 25mm square box section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSide through, the rail passes the socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eWall plate with 2 bolt holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex grub screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack electrophoretic, indoor use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.37kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRelated parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-base-plate-flange-25mm\"\u003eBlack base plate flange for 25mm box\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/square-key-clamp-handrail-bracket\"\u003eGalvanised version for outdoor use\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eMark the bracket positions along the wall at no more than about 1.5m apart. Drill and fix each wall plate with two bolts or anchors to suit the wall. Slide the box section rail through the sockets, set it level, and tighten each grub screw with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWipe clean with a damp cloth. Check the grub screws once a year.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one bracket?\u003c\/summary\u003e\u003cp\u003eYes, one bracket. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre wall fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Choose bolts or anchors to suit the wall.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit round tube?\u003c\/summary\u003e\u003cp\u003eNo. It is made for 25mm square box section. Round tube needs a round key clamp bracket.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eNo. The black electrophoretic finish is for internal use only. Use the galvanised version outdoors.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail or larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57992879374723,"sku":"SSHF-745411-01","price":8.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-square-key-clamp-handrail-bracket-25mm-showroom.jpg?v=1794080072"},{"product_id":"swivel-short-tee-fitting-for-handrail","title":"Yellow GRP Handrail Swivel Short Tee for 50mm Tube, Pre-Drilled with M6 Bolts, Any Plan Angle","description":"\u003cp\u003e\u003cstrong\u003eThe tee that lets a GRP handrail turn any angle at a post, ready drilled.\u003c\/strong\u003e This moulded yellow GRP fitting joins a top rail to a post like a short tee, but the rail half swivels round the post half, so each rail leaves the post at the angle the job needs. Use it to run a guard rail round a circular tank or curved platform edge in straight lengths, or as the hinge of a GRP handrail gate. It comes pre-drilled with its stainless M6 bolts and rivet nuts. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-swivel-short-tee-drilled-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP swivel short tee\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAny plan angle.\u003c\/strong\u003e The rail swings round the post, so one fitting covers every angle on a curved run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks as a hinge.\u003c\/strong\u003e Lets a short GRP gate swing on its post.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Holes drilled, bolts and rivet nuts included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e Moulded GRP, fixed cold with stainless fixings.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eGuard rails round circular tanks, digesters and clarifiers at water and wastewater treatment works; curved platform and walkway edges; GRP handrail gates.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne two-part swivel short tee with M6 bolts and rivet nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eShort tee, rail to post, rail swivels round the post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e180mm long, 60mm wide, 60mm high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.64kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these parts belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003ePre-drilled, bolts included\u003c\/h2\u003e\n\u003cp\u003eThis is the drilled version: the fixing holes are already made and it comes with the stainless M6 fixings it needs, so it goes straight onto the tube. If you would rather set the angle first and drill on site, the \u003ca href=\"\/products\/premium-swivel-short-tee-handrail-fitting\"\u003eundrilled swivel short tee\u003c\/a\u003e is also available.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003eTube: 5000mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003eTube: 3500mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eShort tee, for straight runs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-fitting-mid-rail-cross\"\u003eMid rail cross\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/professional-grp-handrail-end-post\"\u003eEnd post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003eCorner post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eFix the post bases first. Slide the post half over the top of the post and the rail half onto the end of the rail, then turn the rail to the angle you need. Fit the rivet nuts and M6 bolts and tighten. For a gate hinge, fix each half to its own tube and leave the swivel free.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one two-part swivel short tee with its bolts and rivet nuts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go round a circle?\u003c\/summary\u003e\u003cp\u003eYes. Run straight rail lengths between posts and set each swivel tee to the angle of the next length.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel scaffold tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm GRP handrail tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with the lengths, corners, stairs and openings: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every post, tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57986069037443,"sku":"SSHF-834499-01","price":26.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-swivel-short-tee-drilled-50mm-lead.jpg?v=1794082563"},{"product_id":"premium-triangular-base-flange-handrail-fitting","title":"Yellow GRP Handrail Triangular Base Flange for 50mm Tube, Pre-Drilled with M10 Bolt","description":"\u003cp\u003e\u003cstrong\u003eOne flange for post feet, wall ends and stair edges, ready drilled.\u003c\/strong\u003e This moulded yellow GRP flange has a 110mm socket for a 50mm GRP tube and a rounded triangular plate with three 10mm fixing holes. Use it as the foot of a post, as a wall plate to end a rail against a wall, or with a 3 way tee to run a rail along a wall. On stairs its triangle shape lets the post stand closer to the edge of the tread than a square foot. It comes pre-drilled with the stainless M10 bolt that locks the post in. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-triangular-base-flange-drilled-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP triangular base flange\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThree jobs, one part.\u003c\/strong\u003e Base foot, wall end plate or wall-run bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClose to the nosing.\u003c\/strong\u003e The narrow point of the triangle lets stair posts stand nearer the tread edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Drilled for the M10 bolt, which is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e Moulded GRP, fixed cold with stainless fixings.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003ePost feet on stairs, platforms and walkways; wall fixings at the ends of GRP handrail runs; at water and wastewater treatment works, chemical plants, rail depots, food factories and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne triangular base flange with its M10 bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSocket height\u003c\/th\u003e\n\u003ctd\u003e110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlange\u003c\/th\u003e\n\u003ctd\u003e138mm x 97mm rounded triangle, 9mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e3 x 10mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.45kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these parts belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003ePre-drilled, bolt included\u003c\/h2\u003e\n\u003cp\u003eThis is the drilled version: the socket is drilled for the post bolt and the stainless M10 bolt comes with it. An \u003ca href=\"\/products\/premium-grp-handrail-fitting-1\"\u003eundrilled triangular base flange\u003c\/a\u003e is also available. Floor or wall anchors are not included.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003eTube: 5000mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003eTube: 3500mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eShort tee, rail to post\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-wall-flange-fitting\"\u003eRound wall flange\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/professional-grp-handrail-end-post\"\u003eEnd post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003eCorner post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003ePush the post fully into the socket, line up the holes and fit the M10 bolt. Stand the flange in place, mark through the three holes, drill and fix with anchors or bolts to suit the floor or wall.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one flange?\u003c\/summary\u003e\u003cp\u003eYes, one triangular base flange with its M10 bolt.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the floor fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Choose three anchors or bolts to suit the concrete, steel or masonry.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it fix a rail to a wall?\u003c\/summary\u003e\u003cp\u003eYes. Bolt it flat to the wall and push the end of the rail into the socket.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with the lengths, corners, stairs and openings: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every post, tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983619694979,"sku":"SSHF-867267-01","price":20.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-triangular-base-flange-drilled-50mm-lead.jpg?v=1794082676"},{"product_id":"premium-handrail-wall-flange-fitting","title":"Yellow GRP Handrail Round Wall Flange for 50mm Tube, Pre-Drilled with M6 Bolt","description":"\u003cp\u003e\u003cstrong\u003eEnds a yellow GRP handrail neatly at a wall, ready drilled.\u003c\/strong\u003e This moulded yellow GRP wall flange has an oval plate that bolts flat to the wall and a round socket that takes the end of a 50mm GRP rail. It comes pre-drilled with the stainless M6 bolt that locks the rail into the socket. Choose two wall anchors to suit the wall. The price shown is for one flange, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-round-wall-flange-drilled-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP round wall flange\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNeat wall end.\u003c\/strong\u003e No open tube end and no bracket to catch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeep socket.\u003c\/strong\u003e 127mm from the wall, holding the rail square.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e Moulded GRP, fixed cold with stainless fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh visibility.\u003c\/strong\u003e Safety yellow all the way through, so scratches do not show grey.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThe ends of yellow GRP handrails against walls, plant room and pump house walls, at water and wastewater treatment works, chemical plants, rail depots, food factories and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wall flange with its M6 bolt, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlate\u003c\/th\u003e\n\u003ctd\u003e148 x 90mm oval, 12mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProjection\u003c\/th\u003e\n\u003ctd\u003e127mm from the wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall fixing holes\u003c\/th\u003e\n\u003ctd\u003e2 x 12mm at 110mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall anchors\u003c\/th\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.57kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these parts belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003ePre-drilled, bolts included\u003c\/h2\u003e\n\u003cp\u003eThis is the drilled version: the fixing holes are already made and it comes with the stainless M6 fixings it needs, so it goes straight onto the tube. Wall anchors are not included because they depend on the wall.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-fitting-1\"\u003eTriangular base flange, also used as a wall plate\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/90-radius-elbow-handrail-fitting\"\u003e90 degree radius elbow\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003eTube: 5000mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003eTube: 3500mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/professional-grp-handrail-end-post\"\u003eEnd post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003eCorner post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eHold the flange on the wall at rail height, mark through the two holes, drill and fix with anchors to suit the wall. Push the rail fully into the socket, fit the M6 bolt through the drilled holes and tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one flange?\u003c\/summary\u003e\u003cp\u003eYes, one wall flange with its M6 bolt. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre wall fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Use two anchors or bolts to suit concrete, block or steel.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it fix a post to the floor?\u003c\/summary\u003e\u003cp\u003eIt is made as a wall end. For post feet use the triangular or square base flange.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with the lengths, corners, stairs and openings: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every post, tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983592038787,"sku":"SSHF-900035-01","price":17.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-round-wall-flange-drilled-50mm-lead.jpg?v=1794082562"},{"product_id":"premium-handrail-fitting-90-degree-joints","title":"Yellow GRP Handrail Top Corner for 50mm Tube, Drilled with M6 Bolts","description":"\u003cp\u003e\u003cstrong\u003eThe ready-to-fit corner for the top rail of a yellow GRP handrail.\u003c\/strong\u003e The top corner sits on the corner post and takes the two top rails at 90°, closed on top so the corner is smooth to the hand. It arrives pre-drilled and complete with its M6 nuts and bolts, so there are no rivet nuts to set and no holes to drill on site. Moulded in two halves from glass reinforced plastic, it never rusts and needs no painting. The price shown is for one fitting with its bolts.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-top-corner-drilled-m6-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the drilled yellow GRP handrail top corner, 83mm socket reach and 116mm overall\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this top corner\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFaster on site.\u003c\/strong\u003e Pre-drilled with its M6 nuts and bolts included, so fitting is a hex key job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth, closed corner.\u003c\/strong\u003e The top is closed over the post, with no open tube ends where hands slide round the corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSquare every time.\u003c\/strong\u003e The rail sockets are moulded at a fixed 90° to each other and to the post.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e GRP does not corrode, needs no painting and goes together cold.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCorners of guard rails round loading dock edges, roof plant areas, chemical bunds and tanks, water treatment works, food factories, rail and electrical sites, and machine guarding.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne two-part top corner, pre-drilled, with its M6 nuts and bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eTop corner (3 way, 90°): post below, two rails at 90°, closed top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRail socket reach\u003c\/th\u003e\n\u003ctd\u003e83mm from the post centre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall\u003c\/th\u003e\n\u003ctd\u003e116mm each way\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eM6 nuts and bolts, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.54kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these fittings belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne on top of every 90° corner post. The same post takes a \u003ca href=\"\/products\/heavy-duty-handrail-fitting\"\u003emiddle corner\u003c\/a\u003e at knee rail height.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGuard rail shape\u003c\/th\u003e\n\u003cth\u003eTop corners\u003c\/th\u003e\n\u003cth\u003eMiddle corners\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eL-shape round a dock or machine corner\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU-shape round a pit, bund or bay\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare enclosure round roof plant\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTube: \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003e5000mm lengths\u003c\/a\u003e or \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003e3500mm lengths\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePosts: \u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003ecorner post\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eKnee rail on corner posts, drilled: \u003ca href=\"\/products\/heavy-duty-handrail-fitting\"\u003emiddle corner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTop of run posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eKnee rail on run posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-m6-bolts\"\u003emid rail cross\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFeet, drilled: \u003ca href=\"\/products\/premium-triangular-base-flange-handrail-fitting\"\u003etriangular base flange\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnds: \u003ca href=\"\/products\/premium-plastic-end-cap-handrail-fitting\"\u003eyellow end cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the corner post to height so it finishes level with the run posts. Close the two halves of the top corner over the post top, push each top rail fully into its socket, check the rails are level and square, then fit and tighten the M6 bolts supplied. Seal any cut tube ends with end caps.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the bolts included?\u003c\/summary\u003e\u003cp\u003eYes. It comes pre-drilled with its M6 nuts and bolts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it steel?\u003c\/summary\u003e\u003cp\u003eNo. It is moulded glass reinforced plastic, coloured yellow all the way through, so it never needs painting and never rusts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel scaffold tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm GRP handrail tube. Steel 48.3mm tube needs key clamp fittings.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the corner be other than 90°?\u003c\/summary\u003e\u003cp\u003eNo. For other angles use the adjustable joint or the 120° elbow in the same range.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with lengths and corners: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983570903427,"sku":"SSHF-932803-01","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-top-corner-drilled-m6-50mm-loading-dock.jpg?v=1794047975"},{"product_id":"90-radius-elbow-handrail-fitting","title":"Yellow GRP Handrail 90 Degree Radius Elbow for 50mm Tube, Pre-Drilled with M6 Bolts","description":"\u003cp\u003e\u003cstrong\u003eA smooth, rounded end to a yellow GRP handrail, ready drilled.\u003c\/strong\u003e This moulded yellow GRP elbow bends the top rail down into the end post through a smooth 90 degree radius, so there is no open tube end or sharp corner to catch a hand. It can also turn a run of rail through 90 degrees. The two halves close round the tubes and come pre-drilled with stainless M6 bolts and rivet nuts. The price shown is for one elbow, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-90-degree-radius-elbow-drilled-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP 90 degree radius elbow\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth radius.\u003c\/strong\u003e A rounded bend, kinder to hands and clothing than a square corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo jobs.\u003c\/strong\u003e Ends a run at a post, or turns it through 90 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e Moulded GRP, fixed cold with stainless fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh visibility.\u003c\/strong\u003e Safety yellow all the way through, so scratches do not show grey.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThe ends of guard rails and the corners of platforms and walkways in yellow GRP handrail at water and wastewater treatment works, chemical plants, rail depots, food factories and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne two-part radius elbow with M6 bolts and rivet nuts, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003ctd\u003e90 degrees, radiused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e125 x 125mm, 70mm to the bend centre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.43kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these parts belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003ePre-drilled, bolts included\u003c\/h2\u003e\n\u003cp\u003eThis is the drilled version: the fixing holes are already made and it comes with the stainless M6 fixings it needs, so it goes straight onto the tube.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-fitting-90-degree-joints\"\u003eTop corner, for a corner post\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eShort tee, for mid posts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003eTube: 5000mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003eTube: 3500mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/professional-grp-handrail-end-post\"\u003eEnd post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003eCorner post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the end post and the rail so they meet inside the elbow. Close the two halves round the post top and the rail end, fit the rivet nuts into the drilled holes, pass the M6 bolts through and tighten with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one elbow?\u003c\/summary\u003e\u003cp\u003eYes, one two-part elbow with its bolts and rivet nuts. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it turn a corner without a post?\u003c\/summary\u003e\u003cp\u003eYes. It joins two rail lengths at 90 degrees. Support the rails with posts close to the corner.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm GRP handrail tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with the lengths, corners, stairs and openings: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every post, tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983542821251,"sku":"SSHF-096643-01","price":17.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-90-degree-radius-elbow-drilled-50mm-lead.jpg?v=1794082675"},{"product_id":"premium-handrail-fitting-m6-bolts","title":"Yellow GRP Handrail Mid Rail Cross for 50mm Tube, Drilled with M6 Bolts","description":"\u003cp\u003e\u003cstrong\u003eThe ready-to-fit cross that carries the knee rail through every run post.\u003c\/strong\u003e The post runs straight up through the cross and the knee rail runs straight through it from side to side, so both stay unbroken. It arrives pre-drilled with its M6 nuts and bolts, so there are no rivet nuts to set and no holes to drill. Moulded in two halves from glass reinforced plastic, it never rusts and needs no painting. The price shown is for one fitting with its bolts, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-mid-rail-cross-drilled-m6-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the drilled yellow GRP mid rail cross, 150mm long with three bolts at 50mm centres\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose the drilled mid rail cross\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Pre-drilled with its M6 nuts and bolts, so each cross goes on with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoth tubes stay in one piece.\u003c\/strong\u003e Post and knee rail pass straight through, with no joints at knee height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSquare every time.\u003c\/strong\u003e Moulded at a fixed 90°.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e GRP does not corrode, needs no painting and goes together cold.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eTwo-rail guard rails in food factories and washdown areas, water and wastewater treatment works, chemical plants, harbours and quaysides, rail depots and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne two-part mid rail cross, pre-drilled, with its M6 nuts and bolts, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eCross, 90°: post through, knee rail through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength along the rail\u003c\/th\u003e\n\u003ctd\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e3, at 50mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eM6 nuts and bolts, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.34kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these fittings belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne on every run post of a two-rail guard rail. Corner posts take a \u003ca href=\"\/products\/heavy-duty-handrail-fitting\"\u003emiddle corner\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eStraight run\u003c\/th\u003e\n\u003cth\u003ePosts at 1m\u003c\/th\u003e\n\u003cth\u003eMid rail crosses\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e4, plus 2 end posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e9, plus 2 end posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20m\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003e19, plus 2 end posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTube: \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003e5000mm lengths\u003c\/a\u003e or \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003e3500mm lengths\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTop of run posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e or \u003ca href=\"\/products\/premium-handrail-fitting-long-tee\"\u003elong tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorners, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-90-degree-joints\"\u003etop corner\u003c\/a\u003e and \u003ca href=\"\/products\/heavy-duty-handrail-fitting\"\u003emiddle corner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFeet, drilled: \u003ca href=\"\/products\/premium-triangular-base-flange-handrail-fitting\"\u003etriangular base flange\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnds: \u003ca href=\"\/products\/premium-plastic-end-cap-handrail-fitting\"\u003eyellow end cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuying in volume and happy to set rivet nuts? The \u003ca href=\"\/products\/premium-grp-handrail-fitting-mid-rail-cross\"\u003eplain mid rail cross\u003c\/a\u003e costs less. See the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eFix the post bases with the posts running unbroken from base to top rail. Close the two halves of each cross round its post at knee rail height, about half way up, slide the knee rail through all the crosses on the run, check it is level, then fit and tighten the M6 bolts supplied. Seal cut tube ends with end caps.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one mid rail cross with its bolts. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the difference from the plain mid rail cross?\u003c\/summary\u003e\u003cp\u003eThis one comes pre-drilled with its M6 nuts and bolts. The \u003ca href=\"\/products\/premium-grp-handrail-fitting-mid-rail-cross\"\u003eplain version\u003c\/a\u003e is fixed with M6 rivet nuts bought separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the post stop at the cross?\u003c\/summary\u003e\u003cp\u003eNo. The post must run unbroken from base to top rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel scaffold tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm GRP handrail tube. Steel 48.3mm tube needs key clamp fittings.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online with Express UK Delivery. For a full GRP guard rail, send us a sketch with lengths and corners: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983515951491,"sku":"SSHF-194947-01","price":14.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-mid-rail-cross-drilled-m6-50mm-food-factory.jpg?v=1794048410"},{"product_id":"heavy-duty-handrail-fitting","title":"Yellow GRP Handrail Middle Corner for 50mm Tube, Drilled with M6 Bolts","description":"\u003cp\u003e\u003cstrong\u003eThe ready-to-fit corner for the knee rail of a yellow GRP handrail.\u003c\/strong\u003e The middle corner clamps round a continuous 50mm corner post at knee rail height and takes the two knee rails at 90°. This version arrives pre-drilled and complete with its M6 nuts and bolts, so there are no rivet nuts to set and no holes to drill on site. Moulded in two halves from glass reinforced plastic, it never rusts and needs no painting. The price shown is for one fitting with its bolts.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-middle-corner-drilled-m6-50mm-size-guide.jpg?width=1200\" alt=\"Size guide for the drilled yellow GRP handrail middle corner, 83mm from the post centre to each socket end\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose the drilled version\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFaster on site.\u003c\/strong\u003e The holes are already drilled and the M6 nuts and bolts come with it, so fitting is a hex key job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe post stays in one piece.\u003c\/strong\u003e The corner post runs unbroken from base to top rail and the fitting clamps round it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSquare corners without measuring.\u003c\/strong\u003e The two sockets are moulded at a fixed 90°.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e GRP does not corrode, needs no painting and goes together cold.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCorners of guard rails round chemical bunds and storage tanks, water and wastewater treatment works, food factories with washdown, coastal and offshore walkways, rail and electrical sites, and machine guarding in factories.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne two-part middle corner, pre-drilled, with its M6 nuts and bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eMiddle corner (4 way, 90°): post through, two knee rails at 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eA: post centre to end of each socket\u003c\/th\u003e\n\u003ctd\u003e83mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall length\u003c\/th\u003e\n\u003ctd\u003e116mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e20mm in from the socket ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eM6 nuts and bolts, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.65kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these fittings belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0. Keep posts at 1000mm centres or closer to stay within the tested layout.\u003c\/p\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne for every corner on a two-rail guard rail, at knee rail height on the corner post. The top of the same post takes a \u003ca href=\"\/products\/premium-handrail-fitting-90-degree-joints\"\u003etop corner\u003c\/a\u003e.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGuard rail shape\u003c\/th\u003e\n\u003cth\u003eMiddle corners\u003c\/th\u003e\n\u003cth\u003eTop corners\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eL-shape round a tank or machine corner\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU-shape round a bund, pit or bay\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSquare enclosure\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cp\u003eEverything below suits the same 50mm tube:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTube: \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003e5000mm lengths\u003c\/a\u003e or \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003e3500mm lengths\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePosts: \u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003ecorner post\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTop of posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-90-degree-joints\"\u003etop corner\u003c\/a\u003e and \u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eKnee rail on run posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-m6-bolts\"\u003emid rail cross\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFeet, drilled: \u003ca href=\"\/products\/premium-triangular-base-flange-handrail-fitting\"\u003etriangular base flange\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnds: \u003ca href=\"\/products\/premium-plastic-end-cap-handrail-fitting\"\u003eyellow end cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuying in volume and happy to drill? The \u003ca href=\"\/products\/premium-grp-handrail-fitting\"\u003eplain middle corner\u003c\/a\u003e takes M6 rivet nuts. See the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post in its base with the post running unbroken up to the top corner. Cut the knee rails so each fits between the corner post and the next post, cutting square with a fine-tooth saw and wearing a dust mask. Close the two halves of the middle corner round the corner post at knee rail height, push each knee rail fully into its socket, check the rails are level and square, then fit and tighten the M6 bolts supplied. Seal cut tube ends with end caps.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts are tight once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the bolts included?\u003c\/summary\u003e\u003cp\u003eYes. This version comes pre-drilled with its M6 nuts and bolts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the difference from the plain middle corner?\u003c\/summary\u003e\u003cp\u003eThe \u003ca href=\"\/products\/premium-grp-handrail-fitting\"\u003eplain middle corner\u003c\/a\u003e has no bolts and is fixed with M6 rivet nuts bought separately. This one is drilled and ready to bolt up.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel scaffold tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm outside diameter GRP handrail tube. Steel 48.3mm tube needs key clamp fittings.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the corner be other than 90°?\u003c\/summary\u003e\u003cp\u003eNo. For other angles use the adjustable joint or the 120° elbow in the same range.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs GRP handrail safe near electrical equipment?\u003c\/summary\u003e\u003cp\u003eGRP does not conduct electricity like steel, which is why it is chosen for rail and electrical sites. Follow your site's own electrical safety rules.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with lengths and corners: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983463260547,"sku":"SSHF-260483-01","price":34.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-middle-corner-drilled-m6-50mm-chemical-bund.jpg?v=1794047163"},{"product_id":"universal-3-way-handrail-fitting","title":"Yellow GRP Handrail Universal 3 Way for 50mm Tube, Pre-Drilled with M6 Bolts, Rail to Post at Any Slope","description":"\u003cp\u003e\u003cstrong\u003eThe rail-to-post joint for ramps and stairs at any slope, ready drilled.\u003c\/strong\u003e This three-part moulded yellow GRP fitting joins a 50mm GRP rail to a post at whatever angle the ramp or stair needs, where a 90 degree tee will not do. A sleeve connector fits over the post, and a matching pair of universal connectors forms a pivot that carries the rail. It also sets the angle of the top rail and knee rail where they end at a post. It comes pre-drilled with its stainless M6 bolts and rivet nuts. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-universal-3-way-drilled-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP universal 3 way\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAny slope.\u003c\/strong\u003e Set the angle on site to suit shallow ramps or steep stairs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Holes drilled, bolts and rivet nuts included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e Moulded GRP, fixed cold with stainless fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh visibility.\u003c\/strong\u003e Safety yellow all the way through, so scratches do not show grey.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eRamp and stair handrails, knee rails and rail ends in yellow GRP handrail at water and wastewater treatment works, chemical plants, rail depots, food factories and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne three-part universal 3 way with M6 bolts and rivet nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eRail to post, adjustable slope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e66mm wide; rail part 130mm long, pivot 65mm off the post centre; 50mm post socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eParts\u003c\/th\u003e\n\u003ctd\u003eSleeve connector and a matching pair of universal connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.58kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these parts belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003ePre-drilled, bolts included\u003c\/h2\u003e\n\u003cp\u003eThis is the drilled version: the fixing holes are already made and it comes with the stainless M6 fixings it needs, so it goes straight onto the tube. Use the drilled holes once the slope is set.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/universal-4-way-handrail-fitting\"\u003eUniversal 4 way, for a knee rail passing a post\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/adjustable-handrail-fitting-joint\"\u003eAdjustable joint, for a single change of angle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eShort tee, for level rails\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003eTube: 5000mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003eTube: 3500mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/professional-grp-handrail-end-post\"\u003eEnd post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003eCorner post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eFit the sleeve connector over the post at the rail height. Fit the universal connector over the end of the rail and join it to the sleeve through the pivot. Set the rail to the slope of the ramp or stair, then fit the rivet nuts and M6 bolts and tighten with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one complete three-part universal 3 way with its bolts and rivet nuts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat slopes does it suit?\u003c\/summary\u003e\u003cp\u003eThe full range of ramp and stair slopes, set on site.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow is it different from the 4 way?\u003c\/summary\u003e\u003cp\u003eThe 3 way joins one rail to a post. The 4 way carries a rail on both sides of the post.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with the lengths, corners, stairs and openings: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every post, tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983413191043,"sku":"SSHF-489859-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-universal-3-way-drilled-50mm-stair.jpg?v=1794082489"},{"product_id":"premium-adjustable-handrail-fitting","title":"Yellow GRP Handrail Internal Adjustable Joint for 50mm Tube, Any Angle, Drilled with M6 Bolts","description":"\u003cp\u003e\u003cstrong\u003eThe neatest way to change the angle of a yellow GRP handrail.\u003c\/strong\u003e Two ribbed GRP spigots push inside the two tube ends and pivot on one bolt, so the rails meet at any angle, in any plane, with only a small rounded knuckle showing. The outside of the handrail stays smooth and flush, so hands slide over the joint without catching. It comes pre-drilled with its M6 nuts and bolts, never rusts and needs no painting. The price shown is for one joint with its bolts.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-internal-adjustable-joint-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the GRP internal adjustable joint, 108mm with the pivot 82mm from the end and 50mm spigots\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose the internal joint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth, flush handrail.\u003c\/strong\u003e The spigots sit inside the tube, so the joint is the same size as the rail with no sleeve to catch a hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAny angle, any plane.\u003c\/strong\u003e Set it where a stair rail meets a landing, a ramp changes slope or a corner is not 90°.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Pre-drilled, with its M6 nuts and bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e GRP does not corrode and goes together cold.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eHandrails on substation and pump house ramps and steps, plant platform stairs, walkways with changes of level, and any GRP handrail where a smooth hand run matters.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne internal adjustable joint, pre-drilled, with its M6 nuts and bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eInternal adjustable joint: any angle, any plane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eInside the ends of 50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e108mm, pivot 82mm from the end, 50mm spigots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eM6 nuts and bolts, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.41kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInternal or external joint?\u003c\/h2\u003e\n\u003cp\u003eThis internal joint gives the smoothest handrail. The \u003ca href=\"\/products\/adjustable-handrail-fitting-joint\"\u003eexternal adjustable joint\u003c\/a\u003e slides over the tube ends instead, which some fitters find quicker to set on site. Both set to any angle.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTube: \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003e5000mm lengths\u003c\/a\u003e or \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003e3500mm lengths\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts: \u003ca href=\"\/products\/premium-grp-handrail-fitting-60-degree-short-tee\"\u003e60° short tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLevel run posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e and \u003ca href=\"\/products\/premium-handrail-fitting-long-tee\"\u003elong tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorners, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-90-degree-joints\"\u003etop corner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnds: \u003ca href=\"\/products\/premium-plastic-end-cap-handrail-fitting\"\u003eyellow end cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the two tube ends square and deburr them. Push a spigot fully into each tube end, set the joint to the angle where the rails meet, check both rails sit where they should, then fit and tighten the M6 bolts supplied to lock the angle.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one joint?\u003c\/summary\u003e\u003cp\u003eYes, one internal adjustable joint with its bolts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it go inside or over the tube?\u003c\/summary\u003e\u003cp\u003eInside. The ribbed spigots push into the bore of 50mm GRP tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat angles will it set to?\u003c\/summary\u003e\u003cp\u003eAny angle the job needs, in any plane.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for the bore of 50mm GRP handrail tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP stair or ramp handrail, send us a sketch: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983325372803,"sku":"SSHF-653699-01","price":25.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-internal-adjustable-joint-50mm-substation-ramp.jpg?v=1794048700"},{"product_id":"adjustable-handrail-fitting-joint","title":"Yellow GRP Handrail Adjustable Joint for 50mm Tube, Any Angle, Drilled with M6 Bolts","description":"\u003cp\u003e\u003cstrong\u003eThe joint for every awkward angle on a yellow GRP handrail.\u003c\/strong\u003e Two GRP sleeves slide over the two tube ends and pivot on one bolt, so the rails can meet at any angle, in any plane. Use it where a stair handrail levels off at a landing, where a ramp changes slope, or at a corner that is not 90°. It comes pre-drilled with its M6 nuts and bolts, never rusts and needs no painting. The price shown is for one joint with its bolts.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-adjustable-joint-drilled-m6-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the drilled yellow GRP adjustable joint, 120mm long with the pivot 90mm from the end\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use the adjustable joint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAny angle, any plane.\u003c\/strong\u003e Set the two sleeves to the angle the job needs, sloping up, down or round, then lock them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth changes of direction.\u003c\/strong\u003e Stair rails roll smoothly into landing rails without site bending or welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Pre-drilled, with its M6 nuts and bolts included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e GRP does not corrode and goes together cold.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eWhere stair handrails meet landing rails on access stairs, pump houses, substations and plant platforms; where ramps change slope; odd-angle corners round tanks, walkways and machinery.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne adjustable joint (two sleeves on a pivot), pre-drilled, with its M6 nuts and bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eAdjustable joint: any angle, any plane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOver the ends of 50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e120mm long, pivot 90mm from the end, 50mm sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eM6 nuts and bolts, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.49kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne at every change of angle that is not a standard 90° corner or 30° stair fitting: typically two per stair flight, one where the rail leaves the bottom landing and one where it reaches the top, for each rail.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTube: \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003e5000mm lengths\u003c\/a\u003e or \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003e3500mm lengths\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts: \u003ca href=\"\/products\/premium-grp-handrail-fitting-60-degree-short-tee\"\u003e60° short tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLevel run posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e and \u003ca href=\"\/products\/premium-handrail-fitting-long-tee\"\u003elong tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorners, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-90-degree-joints\"\u003etop corner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFeet, drilled: \u003ca href=\"\/products\/premium-triangular-base-flange-handrail-fitting\"\u003etriangular base flange\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnds: \u003ca href=\"\/products\/premium-plastic-end-cap-handrail-fitting\"\u003eyellow end cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the two tube ends square. Slide a sleeve fully over each tube end, set the joint to the angle where the rails meet, check both rails sit where they should, then fit and tighten the M6 bolts supplied to lock the angle. Seal cut tube ends elsewhere with end caps.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one joint?\u003c\/summary\u003e\u003cp\u003eYes, one adjustable joint with its bolts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat angles will it set to?\u003c\/summary\u003e\u003cp\u003eAny angle the job needs, in any plane, from a gentle change of slope to a sharp corner.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it go over or inside the tube?\u003c\/summary\u003e\u003cp\u003eOver. The sleeves slide over the outside of 50mm GRP tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel scaffold tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm GRP handrail tube. Steel 48.3mm tube needs key clamp fittings.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP stair or ramp handrail, send us a sketch: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983287296387,"sku":"SSHF-784771-01","price":24.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-adjustable-joint-drilled-m6-50mm-pumping-station-steps.jpg?v=1794048347"},{"product_id":"premium-handrail-fitting-long-tee","title":"Yellow GRP Handrail Long Tee for 50mm Tube, Drilled with M6 Bolts","description":"\u003cp\u003e\u003cstrong\u003eThe ready-to-fit tee that also joins two lengths of rail.\u003c\/strong\u003e The long tee sits on top of a run post with the top rail passing through its 100mm barrel. Because the barrel is long enough to hold two tube ends, two lengths of rail can meet inside it over a post, so no separate joint is needed. It arrives pre-drilled with its M6 nuts and bolts. Moulded in two halves from glass reinforced plastic, it never rusts and needs no painting. The price shown is for one fitting with its bolts, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-long-tee-drilled-m6-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the drilled yellow GRP long tee, 100mm wide and 108mm overall\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose the long tee\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eJoins rails over a post.\u003c\/strong\u003e Two rail lengths can butt together inside the 100mm barrel, each held by its own bolt, so long runs need no extra joints between posts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Pre-drilled, with its M6 nuts and bolts included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e GRP does not corrode, needs no painting and goes together cold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh visibility.\u003c\/strong\u003e Safety yellow all the way through.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eLong straight guard rails at sewage and water treatment works, chemical and plating plants, rail depots, quaysides, food factories and electrical sites, wherever rail lengths must be joined. It can also join the post at the end of a run to the knee rail.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne two-part long tee, pre-drilled, with its M6 nuts and bolts, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eLong tee, 90°: rail through the top, post into the socket below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoins rail lengths\u003c\/th\u003e\n\u003ctd\u003eYes, two rails can meet inside the barrel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e100mm wide along the rail, 108mm overall height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e2 on the rail at 50mm centres, 1 on the post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eM6 nuts and bolts, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.34kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these fittings belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eUse a long tee on any run post where two rail lengths meet. Tube comes in 3.5m and 5m lengths, so on a long run plan a joint over a post roughly every 3 to 5 posts. Other run posts can take a \u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTube: \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003e5000mm lengths\u003c\/a\u003e or \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003e3500mm lengths\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTop of other run posts, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorners, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-90-degree-joints\"\u003etop corner\u003c\/a\u003e and \u003ca href=\"\/products\/heavy-duty-handrail-fitting\"\u003emiddle corner\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eKnee rail, drilled: \u003ca href=\"\/products\/premium-handrail-fitting-m6-bolts\"\u003emid rail cross\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFeet, drilled: \u003ca href=\"\/products\/premium-triangular-base-flange-handrail-fitting\"\u003etriangular base flange\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnds: \u003ca href=\"\/products\/premium-plastic-end-cap-handrail-fitting\"\u003eyellow end cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the posts so the tops finish level. Close the long tee over the post top, push the rail ends into the barrel from each side so they meet in the middle, check the rail is level, then fit and tighten the M6 bolts supplied. Seal cut tube ends with end caps.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one long tee with its bolts. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the difference from the short tee?\u003c\/summary\u003e\u003cp\u003eThe long tee has a 100mm barrel, long enough to hold two rail ends, so it can join rail lengths over a post. The short tee is only for a rail passing straight through.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the bolts included?\u003c\/summary\u003e\u003cp\u003eYes. It comes pre-drilled with its M6 nuts and bolts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel scaffold tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm GRP handrail tube. Steel 48.3mm tube needs key clamp fittings.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online with Express UK Delivery. For a full GRP guard rail, send us a sketch with lengths and corners: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983262884227,"sku":"SSHF-850307-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/grp-long-tee-drilled-m6-50mm-treatment-works.jpg?v=1794048311"},{"product_id":"premium-handrail-fitting-short-tee","title":"Yellow GRP Handrail Short Tee for 50mm Tube, Pre-Drilled with M6 Bolts, Rail to Post at 90 Degrees","description":"\u003cp\u003e\u003cstrong\u003eThe standard rail-to-post joint for a yellow GRP guard rail, ready drilled.\u003c\/strong\u003e This moulded yellow GRP short tee sits on top of a 50mm GRP post and carries the top rail straight through at 90 degrees. It also joins the end post of a run to the knee rail. It comes pre-drilled with its stainless M6 bolts and rivet nuts, so it fits with a hex key. The price shown is for one tee, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-short-tee-drilled-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP short tee\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e Holes drilled, bolts and rivet nuts in the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSquare and stiff.\u003c\/strong\u003e A full barrel round the rail and a deep socket on the post.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo rust, no hot work.\u003c\/strong\u003e Moulded GRP, fixed cold with stainless fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh visibility.\u003c\/strong\u003e Safety yellow all the way through, so scratches do not show grey.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eTop rails and knee rails on straight runs of yellow GRP handrail at water and wastewater treatment works, chemical plants, rail depots, food factories and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne short tee with M6 bolts and rivet nuts, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eShort tee, rail to post at 90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e108mm high, 64mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHoles\u003c\/th\u003e\n\u003ctd\u003e2, at 74mm and 24mm from the base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass reinforced plastic (GRP), moulded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.25kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eLoad tested system\u003c\/h2\u003e\n\u003cp\u003eThe 50mm GRP tube handrail system these parts belong to has been load tested by an independent UK laboratory as a straight two-rail balustrade, 1100mm high with a mid rail at 550mm and posts at 1000mm centres. It carried 0.4 kN\/m, above the 0.36 kN\/m general duty load for industrial handrails in BS 4592-0.\u003c\/p\u003e\n\u003ch2\u003ePre-drilled, bolts included\u003c\/h2\u003e\n\u003cp\u003eThis is the drilled version: the fixing holes are already made and it comes with the stainless M6 fixings it needs, so it goes straight onto the tube. An \u003ca href=\"\/products\/premium-grp-handrail-fitting-short-tee\"\u003eundrilled short tee\u003c\/a\u003e is also available if you prefer to drill on site.\u003c\/p\u003e\n\u003ch2\u003eJoining two rail lengths?\u003c\/h2\u003e\n\u003cp\u003eDo not use a short tee to join lengths of rail. Use an \u003ca href=\"\/products\/professional-grp-handrail-internal-joint\"\u003einternal joint\u003c\/a\u003e between posts, or a \u003ca href=\"\/products\/premium-handrail-fitting-long-tee\"\u003elong tee\u003c\/a\u003e over a post.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003eTube: 5000mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003eTube: 3500mm lengths\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-fitting-mid-rail-cross\"\u003eMid rail cross, for the knee rail\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-fitting-1\"\u003eTriangular base flange\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/professional-grp-handrail-end-post\"\u003eEnd post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-grp-handrail-corner-post\"\u003eCorner post, pre-assembled\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eFix the post bases first and cut the posts to height. Push the tee onto the top of the post and slide the rail through the barrel. Fit the rivet nuts into the drilled holes, pass the M6 bolts through from the other side and tighten with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with water and mild detergent. Check the bolts once a year and after any impact. GRP needs no painting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one tee?\u003c\/summary\u003e\u003cp\u003eYes, one tee with its bolts and rivet nuts. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need to drill anything?\u003c\/summary\u003e\u003cp\u003eNo. The tee is pre-drilled. If the post or rail is not yet drilled, drill through the tube using the tee's holes as a guide.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel scaffold tube?\u003c\/summary\u003e\u003cp\u003eNo. It is sized for 50mm GRP handrail tube. Steel 48.3mm tube needs key clamp fittings.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full GRP guard rail, send us a sketch with the lengths, corners, stairs and openings: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every post, tube, fitting and fixing you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57983238275459,"sku":"SSHF-046915-01","price":13.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-short-tee-drilled-50mm-lead.jpg?v=1794082488"},{"product_id":"slotted-tube-rubber-gasket-for-19mm-glass","title":"Rubber Gasket for 42.4mm Slotted Handrail Tube, 19mm Glass, 3m","description":"\u003cp\u003e\u003cstrong\u003eThis rubber gasket lines the slot of a 42.4mm slotted handrail tube and grips the top edge of 19mm glass, so the rail sits firmly on a heavy frameless glass balustrade with no rattle and no metal touching the glass.\u003c\/strong\u003e It is a black ribbed rubber strip with a U-shaped profile, supplied in a 3 metre length to match one length of tube. You push it up into the slot, then press the rail down onto the glass. The price shown is for one 3m length.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/slotted-tube-rubber-gasket-19mm-glass-dimension-drawing.jpg?width=1200\" alt=\"End view of 42.4mm slotted tube with the rubber gasket highlighted in the slot, gripping the top edge of 19mm glass\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy the right gasket matters\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA tight grip on the glass.\u003c\/strong\u003e The slot in the tube is wider than the glass. The gasket takes up the gap, so the rail cannot slide, lift or rattle, and the glass is held straight along its top edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo metal against the glass.\u003c\/strong\u003e Toughened glass must not touch steel. The rubber cushions the glass edge inside the tube and takes up small movements from people leaning on the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized to 19mm glass.\u003c\/strong\u003e This gasket is for 19mm toughened glass. Glass this thick is used for tall or wide panels that stand on their own between posts or in a base channel, for exposed seafront and high-level balustrades, and where the balustrade must take crowd loads, as in stadiums, shopping centres and public buildings. For thinner or thicker glass, choose the matching gasket from the table below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTies heavy panels together.\u003c\/strong\u003e A 19mm panel is heavy and stiff. The rail and gasket link the top edges of neighbouring panels, so they share load and stay in line, and the rail stays in place if one panel is damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA neat line.\u003c\/strong\u003e Fitted, it shows only as a thin black line on each face of the glass just under the rail.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eFrameless glass balustrades with a 42.4mm slotted top rail and 19mm glass: seafront promenades, hotel and shopping centre atriums, stadium and grandstand fronts, rooftop terraces, and tall balcony and wind screens, indoors and out.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 3 metre length of rubber gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003e42.4mm slotted handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eU shape with ribbed faces and hollow chambers; exact dimensions not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBlack rubber; compound not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.1 kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoose the gasket by glass thickness\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003cth\u003eGasket\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e8mm to 11mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/slotted-tube-rubber-gasket-for-glass\"\u003eGasket for 8-11mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11.5mm to 13.5mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-rubber-gasket-for-slotted-tube-1\"\u003eGasket for 11.5-13.5mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15mm to 17.5mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-gaskets-for-slotted-tube\"\u003eGasket for 15-17.5mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003ctd\u003eThis gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20mm to 21.52mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-rubber-gasket-for-slotted-tube\"\u003eGasket for 20-21.52mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the slotted tube system\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe slotted tube itself, 3m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-slotted-tube-42-4mm-x-1-5mm\"\u003e316 slotted tube 42.4 x 1.5mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoin two lengths of tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-connector-for-slotted-tube\"\u003eSlotted tube connector\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube end at a wall\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-wall-flange-slotted-tube\"\u003eSlotted tube wall flange\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube onto a post top\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-tube-saddle-42-4mm\"\u003eSlotted tube saddle\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90° corner\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-acute-horizontal-elbow-42-4mm\"\u003e316 horizontal elbow 90°\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStair to landing\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-adjustable-elbow-for-slotted-tube\"\u003e316 adjustable elbow 25-55°\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne 3m length for each 3m of rail. Add up the length of rail that sits on glass and round up to the next 3m. Where the rail passes over a post on a saddle, there is no glass, so no gasket is needed there.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the actual glass, not the nominal size: laminated glass is often a little thicker than its name. This gasket suits 19mm toughened glass. 17.5mm laminated needs the 15-17.5mm gasket, and 20mm or 21.5mm laminated needs the 20-21.52mm gasket. If your glass measures between sizes, ask us before you order.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eCut the gasket to the length of the tube with a sharp knife. Push it up into the slot, starting at one end and working along, so it sits evenly. Set the rail over the glass and press it down until the glass is fully home in the gasket; thick glass grips firmly, so use a rubber mallet and a block of wood, working along the run. Clean with warm soapy water; do not use solvents on the rubber.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for a 3 metre length?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one 3m length of gasket.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it one length or a pack of two?\u003c\/summary\u003e\u003cp\u003eOne 3 metre length. Order as many lengths as your rail needs.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 17.5mm laminated glass?\u003c\/summary\u003e\u003cp\u003eNo. 17.5mm glass is too thin for a firm grip in this gasket. Use the gasket for 15mm to 17.5mm glass.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 21.5mm laminated glass?\u003c\/summary\u003e\u003cp\u003eNo. Use the gasket for 20mm to 21.52mm glass.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut it?\u003c\/summary\u003e\u003cp\u003eYes. Cut it to length with a sharp knife to match the tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go outside?\u003c\/summary\u003e\u003cp\u003eYes. It is used on outdoor balcony and terrace balustrades inside a stainless rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full slotted tube balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57971921289603,"sku":"SSHF-784451-01","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/slotted-tube-rubber-gasket-19mm-glass-seafront-rail-end.jpg?v=1794068058"},{"product_id":"premium-rubber-gasket-for-slotted-tube","title":"Rubber Gasket for 42.4mm Slotted Handrail Tube, 20-21.52mm Glass, 3m","description":"\u003cp\u003e\u003cstrong\u003eThis rubber gasket lines the slot of a 42.4mm slotted handrail tube and grips the top edge of 20mm to 21.52mm laminated glass, so the rail sits firmly on a heavy frameless glass balustrade with no rattle and no metal touching the glass.\u003c\/strong\u003e It is a black ribbed rubber strip with a U-shaped profile, supplied in a 3 metre length to match one length of tube. You push it up into the slot, then press the rail down onto the glass. The price shown is for one 3m length.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/slotted-tube-rubber-gasket-20-21-52mm-glass-dimension-drawing.jpg?width=1200\" alt=\"End view of 42.4mm slotted tube with the rubber gasket highlighted in the slot, gripping the top edge of 20 to 21.52mm glass\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy the right gasket matters\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA tight grip on the glass.\u003c\/strong\u003e The slot in the tube is wider than the glass. The gasket takes up the gap, so the rail cannot slide, lift or rattle, and the glass is held straight along its top edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo metal against the glass.\u003c\/strong\u003e Toughened glass must not touch steel. The rubber cushions the glass edge inside the tube and takes up small movements from people leaning on the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSized to the thickest glass.\u003c\/strong\u003e This gasket is for glass 20mm to 21.52mm thick, which covers 21.5mm laminated glass made from two 10mm toughened plies, the thickest glass in our slotted tube range. It is used where the balustrade must take the heaviest crowd loads or stand very high, as on stadium and grandstand fronts, station footbridges, and high-level public walkways. For thinner glass, choose the matching gasket from the table below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLaminated glass held safely.\u003c\/strong\u003e Laminated glass stays in one piece if a ply breaks. The gasket grips both faces evenly along the top edge, and the rail links neighbouring panels, so they share load and stay in line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA neat line.\u003c\/strong\u003e Fitted, it shows only as a thin black line on each face of the glass just under the rail.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eFrameless glass balustrades with a 42.4mm slotted top rail and 21.5mm laminated glass: stadium and grandstand fronts, railway station footbridges and concourses, shopping centre voids, high-level walkways and public viewing platforms, indoors and out.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 3 metre length of rubber gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003e42.4mm slotted handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003ctd\u003e20mm to 21.52mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eU shape with ribbed faces and hollow chambers; exact dimensions not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3000mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBlack rubber; compound not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.1 kg per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoose the gasket by glass thickness\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003cth\u003eGasket\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e8mm to 11mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/slotted-tube-rubber-gasket-for-glass\"\u003eGasket for 8-11mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11.5mm to 13.5mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-rubber-gasket-for-slotted-tube-1\"\u003eGasket for 11.5-13.5mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15mm to 17.5mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-gaskets-for-slotted-tube\"\u003eGasket for 15-17.5mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/slotted-tube-rubber-gasket-for-19mm-glass\"\u003eGasket for 19mm glass\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20mm to 21.52mm\u003c\/td\u003e\n\u003ctd\u003eThis gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eThe rest of the slotted tube system\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe slotted tube itself, 3m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-slotted-tube-42-4mm-x-1-5mm\"\u003e316 slotted tube 42.4 x 1.5mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJoin two lengths of tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-connector-for-slotted-tube\"\u003eSlotted tube connector\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube end at a wall\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-wall-flange-slotted-tube\"\u003eSlotted tube wall flange\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube onto a post top\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-tube-saddle-42-4mm\"\u003eSlotted tube saddle\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90° corner\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-acute-horizontal-elbow-42-4mm\"\u003e316 horizontal elbow 90°\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStair to landing\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-adjustable-elbow-for-slotted-tube\"\u003e316 adjustable elbow 25-55°\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne 3m length for each 3m of rail. Add up the length of rail that sits on glass and round up to the next 3m. Where the rail passes over a post on a saddle, there is no glass, so no gasket is needed there.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eMeasure the actual glass, not the nominal size: laminated glass is often a little thicker than its name. This gasket suits 20mm to 21.52mm glass, which in practice means 21.5mm laminated. 19mm toughened glass needs the 19mm gasket. Glass thicker than 21.52mm will not fit a 42.4mm slotted tube. If your glass measures between sizes, ask us before you order.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eCut the gasket to the length of the tube with a sharp knife. Push it up into the slot, starting at one end and working along, so it sits evenly. Set the rail over the glass and press it down until the glass is fully home in the gasket; thick glass grips firmly, so use a rubber mallet and a block of wood, working along the run. Clean with warm soapy water; do not use solvents on the rubber.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for a 3 metre length?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one 3m length of gasket.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it one length or a kit?\u003c\/summary\u003e\u003cp\u003eOne 3 metre length of gasket. Order as many lengths as your rail needs.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 21.5mm laminated glass?\u003c\/summary\u003e\u003cp\u003eYes. 21.52mm is the top of this gasket's range, so it suits 21.5mm laminated glass made from two 10mm plies.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 19mm glass?\u003c\/summary\u003e\u003cp\u003eNo. 19mm glass is too thin for a firm grip in this gasket. Use the gasket for 19mm glass.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut it?\u003c\/summary\u003e\u003cp\u003eYes. Cut it to length with a sharp knife to match the tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go outside?\u003c\/summary\u003e\u003cp\u003eYes. It is used on outdoor balcony and terrace balustrades inside a stainless rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full slotted tube balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57971818791299,"sku":"SSHF-882755-01","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/slotted-tube-rubber-gasket-20-21-52mm-glass-stadium-rail-end.jpg?v=1794068542"},{"product_id":"aluminium-slotted-tube-3000mm","title":"Black Aluminium Slotted Tube 42.4mm x 1.5mm, 3m, Powder Coated, Glass Balustrade Handrail","description":"\u003cp\u003e\u003cstrong\u003eThis black aluminium slotted tube is a 3 metre handrail that caps the top edge of a frameless glass balustrade, giving a smooth round rail to hold and tying the glass panels together along the top.\u003c\/strong\u003e It is an extruded aluminium profile, powder coated black with a fine textured finish, 42.4mm across with a 1.5mm wall, round on top with a channel built into the underside that takes the top edge of the glass on a rubber gasket. Aluminium is about a third of the weight of steel, so a full 3m length is easy for one person to handle and fit. The price shown is for one 3m length.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-aluminium-slotted-tube-42-4mm-3m-dimension-drawing.jpg?width=1200\" alt=\"Drawing of the 42.4mm black aluminium slotted tube capping frameless glass, with the wall holder and end cap\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use a black aluminium slotted tube\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA rail and a cap in one.\u003c\/strong\u003e The channel underneath sits over the top edge of the glass, so the tube both protects the glass edge and gives a continuous handrail. It links the panels along the top, so they move together and stay in line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLight and easy to work.\u003c\/strong\u003e Aluminium cuts cleanly with a fine-tooth saw or mitre saw, so the tube is easy to trim to length and mitre at corners on site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack, ready to fit.\u003c\/strong\u003e The tube arrives powder coated, so there is no painting on site. A black rail frames clear glass crisply and matches black window frames, cladding, black glass channel and black posts on modern homes and commercial buildings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWon't rust.\u003c\/strong\u003e The coating sits over aluminium, so a chip or a cut end shows bare metal, not rust. Touch in cut ends and any marks with black paint to keep the finish even.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eFrameless glass balustrades on balconies, decks, terraces and garden steps; glass stair and landing balustrades in homes; and glass screens and mezzanine edges in offices, shops and cafés where a light, neat top rail is wanted.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 3 metre length of aluminium slotted tube. Gasket, end caps and wall holders not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e42.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3000mm, cut to suit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eRound top with a channel built into the underside for the glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePowder coated black, fine texture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003ctd\u003eNot published for this line; ask us before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eThe aluminium slotted tube range\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack aluminium tube, 3m\u003c\/td\u003e\n\u003ctd\u003eThis tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube end at a wall, black\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/wall-flange-holder-aluminium-tube\"\u003eBlack wall holder for 42.4mm aluminium slotted tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree end of the tube, black\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-aluminium-slotted-tube-end-cap-42-4mm\"\u003eBlack end cap for 42.4mm aluminium slotted tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin aluminium tube and fittings\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/premium-aluminium-slotted-tube-3000mm\"\u003eSatin tube\u003c\/a\u003e, \u003ca href=\"\/products\/aluminium-wall-holder-for-slotted-tube\"\u003esatin wall holder\u003c\/a\u003e and \u003ca href=\"\/products\/aluminium-end-cap-slotted-tube\"\u003esatin end cap\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutdoors near the sea, stainless\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-slotted-tube-42-4mm-x-1-5mm\"\u003e316 stainless slotted tube 42.4 x 1.5mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eMeasure the total length of rail along the top of the glass and divide by 3m, rounding up. Allow for offcuts at corners and ends. Add one wall holder for each end that meets a wall and one end cap for each free end.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose this black tube for black frames, channels and posts, or the satin tube to match satin aluminium and stainless fittings. Aluminium suits most homes and gardens. For exposed coastal sites, pool surrounds and commercial jobs where a marine-grade finish is specified, choose the 316 stainless slotted tube instead. The gasket depends on your glass thickness and is not included: call or email us with your glass size and we will confirm the right gasket before you order.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eSet and align the glass first. Cut the tube to length with a fine-tooth blade, remove any burr from the cut and touch in the cut end with black paint. Fit the gasket for your glass into the channel, then lower the tube onto the glass and press it down evenly along its length. Fit wall holders and end caps to finish the ends. Clean with warm soapy water and a soft cloth; do not use abrasive pads or solvents on the powder coat.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one 3m length?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one 3 metre length of tube. Gaskets, end caps and wall holders are sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut it?\u003c\/summary\u003e\u003cp\u003eYes. Cut it to length with a fine-tooth saw blade suitable for aluminium and deburr the cut end.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich gasket do I need?\u003c\/summary\u003e\u003cp\u003eThat depends on your glass thickness. Tell us your glass size and we will confirm the gasket that fits this profile before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go outside?\u003c\/summary\u003e\u003cp\u003eYes. Aluminium does not rust and the powder coat suits balconies, decks and terraces. Near the sea, rinse it with fresh water now and then.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it the same profile as the satin tube?\u003c\/summary\u003e\u003cp\u003eYes, the same 42.4mm profile with the built-in channel, powder coated black.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. 3m lengths travel as long parcels; for a full balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57971672613251,"sku":"SSHF-538115-01","price":73.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-aluminium-slotted-tube-42-4mm-3m-rooftop-terrace.jpg?v=1794071725"},{"product_id":"premium-aluminium-slotted-tube-3000mm","title":"Aluminium Slotted Tube 42.4mm x 1.5mm, 3m, Satin, Glass Balustrade Handrail","description":"\u003cp\u003e\u003cstrong\u003eThis aluminium slotted tube is a 3 metre handrail that caps the top edge of a frameless glass balustrade, giving a smooth round rail to hold and tying the glass panels together along the top.\u003c\/strong\u003e It is an extruded aluminium profile in a satin finish, 42.4mm across with a 1.5mm wall, round on top with a channel built into the underside that takes the top edge of the glass on a rubber gasket. Aluminium is about a third of the weight of steel, so a full 3m length is easy for one person to handle and fit. The price shown is for one 3m length.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/aluminium-slotted-tube-42-4mm-3m-satin-dimension-drawing.jpg?width=1200\" alt=\"Drawing of the 42.4mm aluminium slotted tube capping frameless glass, with the wall holder and end cap\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use an aluminium slotted tube\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA rail and a cap in one.\u003c\/strong\u003e The channel underneath sits over the top edge of the glass, so the tube both protects the glass edge and gives a continuous handrail. It links the panels along the top, so they move together and stay in line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLight and easy to work.\u003c\/strong\u003e Aluminium cuts cleanly with a fine-tooth saw or mitre saw, so the tube is easy to trim to length and mitre at corners on site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWon't rust.\u003c\/strong\u003e Aluminium forms its own protective oxide layer, so the rail does not rust on balconies, decks and terraces. Near the sea or on a pool deck, rinse it now and then with fresh water to keep the satin finish bright.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA lower-cost alternative to stainless.\u003c\/strong\u003e Where a 316 stainless rail is not needed, aluminium gives the same 42.4mm round look in a satin finish for much less, and it matches satin aluminium glass channel.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eFrameless glass balustrades on balconies, decks, terraces and garden steps; glass stair and landing balustrades in homes; and glass screens and mezzanine edges in offices, shops and cafés where a light, neat top rail is wanted.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 3 metre length of aluminium slotted tube. Gasket, end caps and wall holders not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e42.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3000mm, cut to suit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eRound top with a channel built into the underside for the glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003ctd\u003eNot published for this line; ask us before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eThe aluminium slotted tube range\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin aluminium tube, 3m\u003c\/td\u003e\n\u003ctd\u003eThis tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack aluminium tube, 3m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aluminium-slotted-tube-3000mm\"\u003eBlack aluminium slotted tube, 3m\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube end at a wall, satin\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aluminium-wall-holder-for-slotted-tube\"\u003eAluminium wall holder for 42.4mm slotted tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFree end of the tube, satin\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/aluminium-end-cap-slotted-tube\"\u003eAluminium end cap for 42.4mm slotted tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack fittings\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/wall-flange-holder-aluminium-tube\"\u003eBlack wall holder\u003c\/a\u003e and \u003ca href=\"\/products\/premium-aluminium-slotted-tube-end-cap-42-4mm\"\u003eblack end cap\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutdoors near the sea, stainless\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-slotted-tube-42-4mm-x-1-5mm\"\u003e316 stainless slotted tube 42.4 x 1.5mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eMeasure the total length of rail along the top of the glass and divide by 3m, rounding up. Allow for offcuts at corners and ends. Add one wall holder for each end that meets a wall and one end cap for each free end.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose satin to match satin aluminium and stainless fittings, or the black tube for black frames and channels. Aluminium suits most homes and gardens. For exposed coastal sites, pool surrounds and commercial jobs where a marine-grade finish is specified, choose the 316 stainless slotted tube instead. The gasket depends on your glass thickness and is not included: call or email us with your glass size and we will confirm the right gasket before you order.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eSet and align the glass first. Cut the tube to length with a fine-tooth blade and remove any burr from the cut. Fit the gasket for your glass into the channel, then lower the tube onto the glass and press it down evenly along its length. Fit wall holders and end caps to finish the ends. Clean with warm soapy water and a soft cloth; do not use abrasive pads, which will mark the satin finish.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one 3m length?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one 3 metre length of tube. Gaskets, end caps and wall holders are sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut it?\u003c\/summary\u003e\u003cp\u003eYes. Cut it to length with a fine-tooth saw blade suitable for aluminium and deburr the cut end.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich gasket do I need?\u003c\/summary\u003e\u003cp\u003eThat depends on your glass thickness. Tell us your glass size and we will confirm the gasket that fits this profile before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go outside?\u003c\/summary\u003e\u003cp\u003eYes. Aluminium does not rust and suits balconies, decks and terraces. Near the sea, rinse it with fresh water now and then, or choose the 316 stainless slotted tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. 3m lengths travel as long parcels; for a full balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will check parts and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57971658817923,"sku":"SSHF-636419-01","price":67.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/aluminium-slotted-tube-42-4mm-3m-satin-balcony-rail-end.jpg?v=1794070780"},{"product_id":"premium-sloping-side-outlet-elbow-30-45","title":"Key Clamp Top Left Hand Sloping Side Outlet Elbow 30-45°, 42.4mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the head of a stair and slopes down it.\u003c\/strong\u003e It sits on top of the corner post: the post runs into one socket, the level top rail goes into another, and a third socket at 90 degrees in plan points down the stair so the sloping top rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 42.4mm (32NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-left-sloping-side-outlet-elbow-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the top left hand sloping side outlet elbow for 42.4mm tube: A 60, B 56, C 90, D 120mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne top left hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eTop rail, on top of the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 56mm, C 90mm, D 120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.88kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the left hand version. The \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-46\"\u003eright hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKnee rail at the same corner: \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-45\"\u003emiddle left hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 48.3mm tube: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-47\"\u003etop left hand elbow, 48.3mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/premium-sloping-cross-piece-42-4mm-tube\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970415665539,"sku":"SSHF-060099-01","price":22.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-left-sloping-side-outlet-elbow-42-4-lead.jpg?v=1794081354"},{"product_id":"premium-sloping-side-outlet-elbow-30-46","title":"Key Clamp Top Right Hand Sloping Side Outlet Elbow 30-45°, 42.4mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the head of a stair and slopes down it.\u003c\/strong\u003e It sits on top of the corner post: the post runs into one socket, the level top rail into another, and a third socket at 90 degrees in plan points down the stair so the sloping top rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 42.4mm (32NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-sloping-side-outlet-elbow-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the top right hand sloping side outlet elbow for 42.4mm tube: A 60, B 56, C 90, D 120mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne top right hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eTop rail, on top of the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 56mm, C 90mm, D 120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.88kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the right hand version. The \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-45\"\u003eleft hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKnee rail at the same corner: \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-46\"\u003emiddle right hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 48.3mm tube: \u003ca href=\"\/products\/premium-sloping-down-elbow-30-45-degree-48-3mm-tube\"\u003etop right hand elbow, 48.3mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/premium-sloping-cross-piece-42-4mm-tube\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970407965059,"sku":"SSHF-158403-01","price":22.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-sloping-side-outlet-elbow-42-4-school-steps.jpg?v=1794057120"},{"product_id":"premium-sloping-side-outlet-elbow-30-47","title":"Key Clamp Top Left Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the head of a stair and slopes down it.\u003c\/strong\u003e It sits on top of the corner post: the post runs into one socket, the level top rail goes into another, and a third socket at 90 degrees in plan points down the stair so the sloping top rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-left-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the top left hand sloping side outlet elbow for 48.3mm tube: A 66, B 65, C 98, D 133mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne top left hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eTop rail, on top of the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 66mm, B 65mm, C 98mm, D 133mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.18kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the left hand version. The \u003ca href=\"\/products\/premium-sloping-down-elbow-30-45-degree-48-3mm-tube\"\u003eright hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKnee rail at the same corner: \u003ca href=\"\/products\/sloping-side-outlet-elbow-30-45\"\u003emiddle left hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-45\"\u003etop left hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970402001283,"sku":"SSHF-223939-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-left-sloping-side-outlet-elbow-48-3-lead.jpg?v=1794081293"},{"product_id":"premium-sloping-down-elbow-30-45-degree-48-3mm-tube","title":"Key Clamp Top Right Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the head of a stair and slopes down it.\u003c\/strong\u003e It sits on top of the corner post: the post runs into one socket, the level top rail into another, and a third socket at 90 degrees in plan points down the stair so the sloping top rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the top right hand sloping side outlet elbow for 48.3mm tube: A 68, B 63, C 99, D 135mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne top right hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eTop rail, on top of the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 63mm, C 99mm, D 135mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the right hand version. The \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-47\"\u003eleft hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKnee rail at the same corner: \u003ca href=\"\/products\/premium-sloping-down-side-outlet-elbow\"\u003emiddle right hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-46\"\u003etop right hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970398560643,"sku":"SSHF-551619-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-top-sloping-side-outlet-elbow-48-3-loading-platform-stair.jpg?v=1794057082"},{"product_id":"sloping-down-side-outlet-elbow-30-45","title":"Key Clamp Middle Left Hand Sloping Side Outlet Elbow 30-45°, 42.4mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 42.4mm (32NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle left hand sloping side outlet elbow for 42.4mm tube: A 60, B 72, C 56, D 86mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle left hand sloping side outlet elbow, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 72mm, C 56mm, D 86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.78kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the left hand version. The \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-46\"\u003eright hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-45\"\u003etop left hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 48.3mm tube: \u003ca href=\"\/products\/sloping-side-outlet-elbow-30-45\"\u003emiddle left hand elbow, 48.3mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/premium-sloping-cross-piece-42-4mm-tube\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970377720195,"sku":"SSHF-649923-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-42-4-lead.jpg?v=1794081291"},{"product_id":"sloping-down-side-outlet-elbow-30-46","title":"Key Clamp Middle Right Hand Sloping Side Outlet Elbow 30-45°, 42.4mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 42.4mm (32NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-right-sloping-side-outlet-elbow-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle right hand sloping side outlet elbow for 42.4mm tube: A 60, B 72, C 56, D 86mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle right hand sloping side outlet elbow, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 72mm, C 56mm, D 86mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.78kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the right hand version. The \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-45\"\u003eleft hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-46\"\u003etop right hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 48.3mm tube: \u003ca href=\"\/products\/premium-sloping-down-side-outlet-elbow\"\u003emiddle right hand elbow, 48.3mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/premium-sloping-cross-piece-42-4mm-tube\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57970352062851,"sku":"SSHF-715459-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-right-sloping-side-outlet-elbow-42-4-lead.jpg?v=1794081164"},{"product_id":"sloping-side-outlet-elbow-30-45","title":"Key Clamp Middle Left Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle left hand sloping side outlet elbow for 48.3mm tube: A 68, B 81, C 70, D 98mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle left hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 81mm, C 70mm, D 98mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.02kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the left hand version. The \u003ca href=\"\/products\/premium-sloping-down-side-outlet-elbow\"\u003eright hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-47\"\u003etop left hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-45\"\u003emiddle left hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57960636481923,"sku":"SSHF-780995-01","price":25.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-left-sloping-side-outlet-elbow-48-3-lead.jpg?v=1794081162"},{"product_id":"premium-sloping-down-side-outlet-elbow","title":"Key Clamp Middle Right Hand Sloping Side Outlet Elbow 30-45°, 48.3mm Tube, Galvanised Handrail Fitting","description":"\u003cp\u003e\u003cstrong\u003eThe corner fitting for a key clamp handrail that turns at the side of a stair and slopes down it.\u003c\/strong\u003e It sits on the corner post at knee rail height: the post runs straight through it, the level knee rail goes into one socket, and a second socket at 90 degrees in plan points down the stair so the sloping knee rail continues round the corner with no bending or welding. It suits stair pitches from 30 to 45 degrees and takes 48.3mm (40NB) tube. Galvanised malleable iron, locked with hex socket grub screws. The price shown is for one fitting.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-sloping-side-outlet-elbow-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the middle right hand sloping side outlet elbow for 48.3mm tube: A 68, B 81, C 70, D 98mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCorner and slope in one.\u003c\/strong\u003e One fitting turns the rail 90 degrees and drops it down the stair, where you would otherwise need two fittings and a short link tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding, no hot work.\u003c\/strong\u003e Cut the tube square, push it in and tighten the grub screws with a hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised for outdoors.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e The sloping socket suits any stair pitch from 30 to 45 degrees, so it copes with real stairs that are not quite to drawing.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExternal steps at schools, offices and public buildings, stairs down from loading platforms and mezzanines, access stairs at water treatment works and plant rooms, and steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne middle right hand sloping side outlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eKnee rail, part way up the corner post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 81mm, C 70mm, D 98mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.02kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight hand or left hand?\u003c\/h2\u003e\n\u003cp\u003eThis is the right hand version. The \u003ca href=\"\/products\/sloping-side-outlet-elbow-30-45\"\u003eleft hand version\u003c\/a\u003e is its mirror image. Check the photos and drawing against your corner, or send us a sketch of the stair and we will confirm which hand you need.\u003c\/p\u003e\n\u003ch2\u003eBuilding the corner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop rail at the same corner: \u003ca href=\"\/products\/premium-sloping-down-elbow-30-45-degree-48-3mm-tube\"\u003etop right hand sloping side outlet elbow\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame fitting for 42.4mm tube: \u003ca href=\"\/products\/sloping-down-side-outlet-elbow-30-46\"\u003emiddle right hand elbow, 42.4mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStair posts part way down: \u003ca href=\"\/products\/professional-sloping-cross-piece-for-tubes\"\u003esloping cross piece 30-45 degrees\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee all fittings in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb. Slide the fitting onto the post and tighten its grub screw. Push the level rail fully into its socket, then set the sloping rail to the stair pitch and tighten all the grub screws firmly with a hex key. Check the rails are at the right height above the stair nosings and landing before the final tighten.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my stair is steeper than 45 degrees?\u003c\/summary\u003e\u003cp\u003eThis fitting covers 30 to 45 degrees. Call us with your stair rise and going and we will suggest the right fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57960474378627,"sku":"SSHF-846531-01","price":25.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-middle-sloping-side-outlet-elbow-48-3-stair-guard-rail.jpg?v=1794068035"},{"product_id":"premium-sloping-down-tee-30-45","title":"Key Clamp Sloping Down Tee 30-45° for 42.4mm Tube, Galvanised Handrail Fitting, Level to Falling Rail","description":"\u003cp\u003e\u003cstrong\u003eWhere a level handrail runs straight on down a stair or ramp.\u003c\/strong\u003e This galvanised key clamp tee sits on top of a post: the post goes into the bottom socket, the level rail into one side and the sloping rail into the other, in a straight line in plan, with the sloping socket set to fall at 30 to 45 degrees. It suits 42.4mm (32NB) tube and locks with hex socket grub screws, so the change of slope is made in one neat fitting with no bending or welding. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-down-tee-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the sloping down tee for 42.4mm tube: A 60, B 56, C 85, D 145mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLevel to sloping in one fitting.\u003c\/strong\u003e No bent tube and no separate elbow and tee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight run.\u003c\/strong\u003e The rail carries straight on down the stair, it does not turn a corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e Suits any stair or ramp pitch from 30 to 45 degrees.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThe head of external stairs and steep ramps at schools, offices, public buildings and car parks; stairs to loading docks, mezzanines and plant platforms; steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne sloping down tee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eTop rail on a post, level rail to falling rail in a straight line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 56mm, C 85mm, D 145mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.89kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eUp or down?\u003c\/h2\u003e\n\u003cp\u003eStand on the level part of the rail and look along it. If the rail then climbs, you need the sloping up tee; if it drops, the sloping down tee. This is the sloping down version.\u003c\/p\u003e\n\u003ch2\u003eBuilding the handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-up-tee-30-45-degrees\"\u003eSloping up tee, 42.4mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-downward-tee-30-45\"\u003eSloping down tee, 48.3mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-46\"\u003eTop sloping side outlet elbow, for a corner at the head of a stair\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the post plumb and slide the tee onto it. Push the level rail fully into its socket, then set the sloping rail to the stair pitch, check the rail heights above the nosings and landing, and tighten all the grub screws firmly with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it turn a corner?\u003c\/summary\u003e\u003cp\u003eNo. The level and sloping rails run in a straight line. For a corner, use a sloping side outlet elbow.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57960457044355,"sku":"SSHF-912067-01","price":22.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-down-tee-42-4-lead.jpg?v=1794081453"},{"product_id":"premium-sloping-downward-tee-30-45","title":"Key Clamp Sloping Down Tee 30-45° for 48.3mm Tube, Galvanised Handrail Fitting, Level to Falling Rail","description":"\u003cp\u003e\u003cstrong\u003eWhere a level handrail runs straight on down a stair or ramp.\u003c\/strong\u003e This galvanised key clamp tee sits on top of a post: the post goes into the bottom socket, the level rail into one side and the sloping rail into the other, in a straight line in plan, with the sloping socket set to fall at 30 to 45 degrees. It suits 48.3mm (40NB) tube and locks with hex socket grub screws, so the change of slope is made in one neat fitting with no bending or welding. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-down-tee-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the sloping down tee for 48.3mm tube: A 68, B 65, C 100, D 170mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLevel to sloping in one fitting.\u003c\/strong\u003e No bent tube and no separate elbow and tee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight run.\u003c\/strong\u003e The rail carries straight on down the stair, it does not turn a corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e Suits any stair or ramp pitch from 30 to 45 degrees.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThe head of external stairs and steep ramps at schools, offices, public buildings and car parks; stairs to loading docks, mezzanines and plant platforms; steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne sloping down tee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eTop rail on a post, level rail to falling rail in a straight line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 65mm, C 100mm, D 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.18kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eUp or down?\u003c\/h2\u003e\n\u003cp\u003eStand on the level part of the rail and look along it. If the rail then climbs, you need the sloping up tee; if it drops, the sloping down tee. This is the sloping down version.\u003c\/p\u003e\n\u003ch2\u003eBuilding the handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-up-tee-30-45-degree\"\u003eSloping up tee, 48.3mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-down-tee-30-45\"\u003eSloping down tee, 42.4mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-down-elbow-30-45-degree-48-3mm-tube\"\u003eTop sloping side outlet elbow, for a corner at the head of a stair\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the post plumb and slide the tee onto it. Push the level rail fully into its socket, then set the sloping rail to the stair pitch, check the rail heights above the nosings and landing, and tighten all the grub screws firmly with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it turn a corner?\u003c\/summary\u003e\u003cp\u003eNo. The level and sloping rails run in a straight line. For a corner, use a sloping side outlet elbow.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57960421392771,"sku":"SSHF-010371-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-down-tee-48-3-lead.jpg?v=1794081418"},{"product_id":"premium-sloping-up-tee-30-45-degrees","title":"Key Clamp Sloping Up Tee 30-45° for 42.4mm Tube, Galvanised Handrail Fitting, Level to Rising Rail","description":"\u003cp\u003e\u003cstrong\u003eWhere a level handrail runs straight on up a stair or ramp.\u003c\/strong\u003e This galvanised key clamp tee sits on top of a post: the post goes into the bottom socket, the level rail into one side and the sloping rail into the other, in a straight line in plan, with the sloping socket set to rise at 30 to 45 degrees. It suits 42.4mm (32NB) tube and locks with hex socket grub screws, so the change of slope is made in one neat fitting with no bending or welding. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-up-tee-42-4-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the sloping up tee for 42.4mm tube: A 60, B 56, C 145, D 120mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLevel to sloping in one fitting.\u003c\/strong\u003e No bent tube and no separate elbow and tee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight run.\u003c\/strong\u003e The rail carries straight on up the stair, it does not turn a corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e Suits any stair or ramp pitch from 30 to 45 degrees.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThe foot of external stairs and steep ramps at schools, offices, public buildings and car parks; stairs to loading docks, mezzanines and plant platforms; steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne sloping up tee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter (32NB, 1 1\/4 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eTop rail on a post, level rail to rising rail in a straight line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 60mm, B 56mm, C 145mm, D 120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.8kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eUp or down?\u003c\/h2\u003e\n\u003cp\u003eStand on the level part of the rail and look along it. If the rail then climbs, you need the sloping up tee; if it drops, the sloping down tee. This is the sloping up version.\u003c\/p\u003e\n\u003ch2\u003eBuilding the handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-down-tee-30-45\"\u003eSloping down tee, 42.4mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-up-tee-30-45-degree\"\u003eSloping up tee, 48.3mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-side-outlet-elbow-30-46\"\u003eTop sloping side outlet elbow, for a corner at the head of a stair\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the post plumb and slide the tee onto it. Push the level rail fully into its socket, then set the sloping rail to the stair pitch, check the rail heights above the nosings and landing, and tighten all the grub screws firmly with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 42.4mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 42.4mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it turn a corner?\u003c\/summary\u003e\u003cp\u003eNo. The level and sloping rails run in a straight line. For a corner, use a sloping side outlet elbow.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57960383480195,"sku":"SSHF-418243-01","price":22.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-up-tee-42-4-lead.jpg?v=1794081417"},{"product_id":"premium-sloping-up-tee-30-45-degree","title":"Key Clamp Sloping Up Tee 30-45° for 48.3mm Tube, Galvanised Handrail Fitting, Level to Rising Rail","description":"\u003cp\u003e\u003cstrong\u003eWhere a level handrail runs straight on up a stair or ramp.\u003c\/strong\u003e This galvanised key clamp tee sits on top of a post: the post goes into the bottom socket, the level rail into one side and the sloping rail into the other, in a straight line in plan, with the sloping socket set to rise at 30 to 45 degrees. It suits 48.3mm (40NB) tube and locks with hex socket grub screws, so the change of slope is made in one neat fitting with no bending or welding. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-up-tee-48-3-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the sloping up tee for 48.3mm tube: A 68, B 75, C 170, D 132mm\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLevel to sloping in one fitting.\u003c\/strong\u003e No bent tube and no separate elbow and tee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight run.\u003c\/strong\u003e The rail carries straight on up the stair, it does not turn a corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised.\u003c\/strong\u003e Malleable iron, hot-dip galvanised to match galvanised tube outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust on site.\u003c\/strong\u003e Suits any stair or ramp pitch from 30 to 45 degrees.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThe foot of external stairs and steep ramps at schools, offices, public buildings and car parks; stairs to loading docks, mezzanines and plant platforms; steps in parks and public spaces.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne sloping up tee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e48.3mm outside diameter (40NB, 1 1\/2 inch nominal bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eTop rail on a post, level rail to rising rail in a straight line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStair pitch\u003c\/th\u003e\n\u003ctd\u003e30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (see drawing)\u003c\/th\u003e\n\u003ctd\u003eA 68mm, B 75mm, C 170mm, D 132mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eHex socket grub screws, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.18kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eUp or down?\u003c\/h2\u003e\n\u003cp\u003eStand on the level part of the rail and look along it. If the rail then climbs, you need the sloping up tee; if it drops, the sloping down tee. This is the sloping up version.\u003c\/p\u003e\n\u003ch2\u003eBuilding the handrail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-downward-tee-30-45\"\u003eSloping down tee, 48.3mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-up-tee-30-45-degrees\"\u003eSloping up tee, 42.4mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-sloping-down-elbow-30-45-degree-48-3mm-tube\"\u003eTop sloping side outlet elbow, for a corner at the head of a stair\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet the post plumb and slide the tee onto it. Push the level rail fully into its socket, then set the sloping rail to the stair pitch, check the rail heights above the nosings and landing, and tighten all the grub screws firmly with a hex key.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eCheck the grub screws once a year on busy stairs. Treat any cut tube ends or scuffs to the galvanising with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, one fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit 48.3mm scaffold tube?\u003c\/summary\u003e\u003cp\u003eYes. It takes any 48.3mm outside diameter steel tube, galvanised or painted.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it turn a corner?\u003c\/summary\u003e\u003cp\u003eNo. The level and sloping rails run in a straight line. For a corner, use a sloping side outlet elbow.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre tools needed?\u003c\/summary\u003e\u003cp\u003eJust a hex key to tighten the grub screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full stair handrail, send us a sketch with the stair and landing lengths: call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will list every tube and fitting you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57959991017859,"sku":"SSHF-582083-01","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-sloping-up-tee-48-3-lead.jpg?v=1794081356"},{"product_id":"premium-side-through-rail-support-key-clamp","title":"Black Key Clamp Side Through Rail Support for 33.7mm Tube, Wall Handrail Bracket, Indoor, Size B","description":"\u003cp\u003e\u003cstrong\u003eA black wall bracket for 33.7mm tube: the tube passes straight through the ring, and the flat base screws to a wall, a panel or a kick plate.\u003c\/strong\u003e The ring sits on a short stem 57mm out from the base, so a handrail clears the wall comfortably, and one hex socket grub screw locks the tube at any point along its length. The base is 84 x 44mm with two 7mm screw holes at 64mm centres. Use it to hold a slim black handrail along a wall, tie a tube frame back to a wall, mount display panels, or fix a kick plate to guardrail uprights. The black electrophoretic finish is for indoor use. The price shown is for one support, with a minimum order of 10.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-key-clamp-side-through-rail-support-33-7mm-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the black 33.7mm key clamp side through rail support, 57mm from base to tube centre with an 84 x 44mm base\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy fitters use it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe rail runs straight through.\u003c\/strong\u003e Unlike an end bracket, the tube passes through the ring, so one length of rail can be carried by as many supports as you need along a wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClear of the wall.\u003c\/strong\u003e The 57mm stem holds the tube far enough out for a hand to grip the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirm, flat fixing.\u003c\/strong\u003e The wide base takes two screws, so the bracket stays square on plaster, timber or a steel kick plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack to match black frames.\u003c\/strong\u003e It matches black key clamp tube and fittings for a clean, industrial look indoors.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSlim handrails along stairs, corridors and ramps inside cafés, shops, offices and homes; tying black tube shelving and display frames back to walls; mounting exhibition and display panels; and fixing kick plates to the uprights of indoor guardrails.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne side through rail support, minimum order 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e33.7mm outside diameter (size B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase to tube centre\u003c\/th\u003e\n\u003ctd\u003e57mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase size\u003c\/th\u003e\n\u003ctd\u003e84 x 44mm, 7mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, 7mm, at 64mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGrub screw\u003c\/th\u003e\n\u003ctd\u003eOne hex socket screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack electrophoretic coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.38 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eSupports\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall handrail, per metre of rail\u003c\/td\u003e\n\u003ctd\u003e1, plus 1 at each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2m handrail\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3m handrail\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTie-back for a tube frame\u003c\/td\u003e\n\u003ctd\u003e2 per frame, top and middle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eKeep supports no more than 1 metre apart on a handrail, and finish the rail ends with end caps.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right size\u003c\/h2\u003e\n\u003cp\u003eKey clamps are sized by the tube's outside diameter. 33.7mm tube is often sold as 1\" or 25mm nominal bore. Measure across the tube before ordering: this fitting will not grip 26.9mm or 42.4mm tube. The same black fitting is made for \u003ca href=\"\/products\/premium-side-through-rail-support\"\u003e26.9mm\u003c\/a\u003e tube.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark the rail line on the wall, hold each support in place and mark the two holes. Drill and fix with screws and plugs to suit the wall (not included). Slide the rail through the rings, set it level and tighten each grub screw with a hex key. Wipe clean with a damp cloth and touch up chips with black paint. The electrophoretic coat is for indoor use only.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one support?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one support, with a minimum order of 10.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre screws included?\u003c\/summary\u003e\u003cp\u003eNo. Use screws and plugs to suit your wall through the two 7mm holes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the rail pass through or end in it?\u003c\/summary\u003e\u003cp\u003eThe rail passes straight through the ring, so supports can be fitted anywhere along one length of tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eNo. The black electrophoretic finish is for indoor use. Use galvanised fittings outdoors.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail or mixed fittings, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57957584765315,"sku":"SSHF-211267-01","price":7.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-key-clamp-side-through-rail-support-33-7mm-in-use.jpg?v=1794133816"},{"product_id":"premium-electrophoretic-steel-tube-33-7mm-od","title":"Black Electrophoretic Steel Tube, 33.7mm OD x 2.6mm Wall, 3m Length, for Indoor Key Clamp Handrails","description":"\u003cp\u003e\u003cstrong\u003eA 3 metre length of black electrophoretic coated steel tube, 33.7mm outside diameter with a 2.6mm wall, for indoor handrails, balustrades and frames.\u003c\/strong\u003e The black e-coat gives a smooth, even satin black finish that suits shop displays, clothes rails, shelving, stair handrails and furniture frames. It is the same outside diameter as 33.7mm key clamp fittings, so tees, elbows and flanges fit straight on. \u003cstrong\u003eFor indoor use only.\u003c\/strong\u003e Each length weighs about 6.5 kg.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-e-coat-steel-tube-33x2-3m-drawing.jpg?width=1200\" alt=\"Dimension drawing of the black electrophoretic steel tube: 33.7mm outside diameter, 2.6mm wall, 3000mm long\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this tube\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA clean black finish.\u003c\/strong\u003e The electrophoretic coating is applied evenly over the whole tube, so there is no painting to do before it goes into a shop, bar, office or home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits 33.7mm key clamp fittings.\u003c\/strong\u003e Build handrails, balustrades and frames with no welding, using tees, elbows, crosses and floor flanges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA full 3m length.\u003c\/strong\u003e Cut it into uprights and rails to suit, with little waste on a typical balustrade or frame.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA comfortable handrail size.\u003c\/strong\u003e 33.7mm with a 2.6mm wall is stiffer than 26.9mm tube and sits well in the hand on stairs and landings.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eIndoor stair handrails, landing and mezzanine balustrades, bar rails, clothes rails and shop displays, industrial-style shelving, tables and benches, and workshop and storage frames.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 3000mm length of tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e33.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3000mm, square cut ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e33.7mm key clamp fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack electrophoretic (e-coat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoors only, not suitable for external use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 6.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eOther lengths and finishes\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou want\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack e-coat tube, 33.7mm, 3m\u003c\/td\u003e\n\u003ctd\u003eThis tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack e-coat tube, 26.9mm, 3m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-steel-tube-26-9mm-x-3m\"\u003eBlack tube, 26.9mm x 3m\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack powder coated tube, 42.4mm, 3.5m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-steel-tube-3500mm\"\u003eBlack tube, 42.4mm x 3.5m\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanised tube for outdoor use, 33.7mm, 1500mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-galvanised-steel-tube-1500mm\"\u003eGalvanised tube, 33.7mm x 1500mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll tube sizes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/sc-circular-hollow-section\"\u003eRound steel tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCutting and fitting\u003c\/h2\u003e\n\u003cp\u003eMeasure the rail or frame and cut the tube square with a pipe cutter or fine-tooth saw. Deburr the end and touch up the bare steel with black metal paint. Slide the key clamp fittings on, set the frame square and tighten the grub screws with an Allen key.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eNo. The electrophoretic coating is for indoor use only. For outdoor rails and frames, choose galvanised tube.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one length?\u003c\/summary\u003e\u003cp\u003eYes, for one 3000mm length. For larger quantities, call us for a quantity price.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich fittings fit this tube?\u003c\/summary\u003e\u003cp\u003eKey clamp fittings made for 33.7mm outside diameter tube, often listed as 1 inch nominal bore.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site. Tube is a long item, so call 01744 520 110 or email sales@industrialsuppliesco.co.uk if you need to confirm delivery access or a date before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57953022542211,"sku":"SSHF-699011-01","price":90.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/black-e-coat-steel-tube-33x2-3m-landing-balustrade.jpg?v=1794115015"},{"product_id":"premium-yellow-steel-tube-33-7mm-x-3-5m","title":"Yellow Powder Coated Steel Tube, 33.7mm OD x 2.6mm Wall, 3.5m Length, RAL 1023, for Key Clamp Handrails","description":"\u003cp\u003e\u003cstrong\u003eA 3.5m length of traffic yellow powder coated steel tube, 33.7mm outside diameter with a 2.6mm wall, for high-visibility key clamp safety barriers, guard rails and machine guards.\u003c\/strong\u003e The bright RAL 1023 yellow makes rails and barriers stand out in warehouses, factories, car parks and loading areas, and it matches yellow key clamp fittings. The tube is best suited to indoor use; it can go outside, but for exposed outdoor rails galvanised tube lasts longer. Each length weighs about 6.9 kg.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-powder-coated-tube-33x2-3500-drawing.jpg?width=1200\" alt=\"Dimension drawing of the yellow powder coated steel tube: 33.7mm outside diameter, 2.6mm wall, 3500mm long\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose this tube\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-visibility yellow.\u003c\/strong\u003e Traffic yellow RAL 1023 is the colour people expect on safety barriers, so walkways, edges and hazards are easy to see.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade for 33.7mm key clamp fittings.\u003c\/strong\u003e Tees, elbows, base flanges and crosses fit straight on, for a barrier built with no welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHard-wearing powder coat.\u003c\/strong\u003e A tough, glossy finish that is easy to wipe clean and stands up to knocks better than paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA full 3.5m length.\u003c\/strong\u003e Long barrier runs with fewer joins, or cut down into uprights and rails with little waste.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003ePedestrian walkway barriers in warehouses and factories, guard rails around machinery, pits and loading docks, rack end protection, car park and depot barriers, and safety rails on platforms and mezzanines.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne 3500mm length of tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e33.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall thickness\u003c\/th\u003e\n\u003ctd\u003e2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3500mm, square cut ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e33.7mm key clamp fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eTraffic yellow powder coat, RAL 1023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eBest indoors; can be used outside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 6.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eOther yellow tube sizes\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou want\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYellow tube, 33.7mm, 3.5m\u003c\/td\u003e\n\u003ctd\u003eThis tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYellow tube, 42.4mm, 3.5m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/yellow-powder-coated-steel-tube-42-4mm\"\u003eYellow tube, 42.4mm x 3.5m\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYellow tube, 48.3mm, 3.5m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-yellow-steel-tube-48-3mm-x-3-5m\"\u003eYellow tube, 48.3mm x 3.5m\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYellow tube, 33.7mm, 1060mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-yellow-steel-tube-1060mm\"\u003eYellow tube, 33.7mm x 1060mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll tube sizes\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/sc-circular-hollow-section\"\u003eRound steel tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCutting and fitting\u003c\/h2\u003e\n\u003cp\u003eMeasure the barrier run and cut the tube square with a pipe cutter or cold saw. Deburr the end and touch up the bare steel with RAL 1023 yellow paint. Fix base flanges to the floor, slide on the key clamp fittings, set the rails level and the uprights plumb, and tighten the grub screws with an Allen key.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eIt can be used outside, but it is best suited to indoor use. For barriers that stay outdoors in all weather, galvanised tube lasts longer.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one length?\u003c\/summary\u003e\u003cp\u003eYes, for one 3500mm length. For larger quantities, call us for a quantity price.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich fittings fit this tube?\u003c\/summary\u003e\u003cp\u003eKey clamp fittings made for 33.7mm outside diameter tube, often listed as 1 inch nominal bore. Yellow fittings give a matching finish.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site. Tube is a long item, so call 01744 520 110 or email sales@industrialsuppliesco.co.uk if you need to confirm delivery access or a date before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57952814301571,"sku":"SSHF-007427-01","price":72.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-powder-coated-tube-33x2-3500-stair-handrail.jpg?v=1794115970"},{"product_id":"toughened-glass-panel-1000mm-x-900mm","title":"Toughened Glass Panel 1000 x 900mm, 10mm Clear, Polished Edges, for Post and Handrail Balustrades","description":"\u003cp\u003e\u003cstrong\u003eThis is a clear 10mm toughened safety glass panel, 1000 x 900mm with edges polished all round, made to be held between stainless steel balustrade posts by glass clamps.\u003c\/strong\u003e It is the infill panel for a post and clamp glass balustrade on a terrace, deck, balcony, landing or stair, and suits the post kits and 10mm glass clamps on this site. Toughened glass is about four to five times stronger than ordinary glass of the same thickness and breaks into small blunt pieces rather than sharp shards. The panel weighs about 23.4kg. The price shown is for one panel.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/toughened-glass-panel-1000x900x10mm-dimension-drawing.jpg?width=1200\" alt=\"Dimension drawing of the toughened glass panel, 1000 x 900mm, 10mm thick with polished edges\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy use this panel\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSafety glass for barriers.\u003c\/strong\u003e Toughening heats the glass and cools it fast, leaving the surfaces in compression. That makes it much stronger and, if it does break, it breaks into small granules, which is why toughened glass is used for balustrades and guarding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolished edges all round.\u003c\/strong\u003e Every edge is ground and polished smooth and clear. In a post and clamp balustrade the side and top edges are on show, so a polished edge looks finished and is safe to touch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to fit.\u003c\/strong\u003e It is a stock size, so there is no template, measure-up visit or wait for made-to-order glass. Plan your post spacing round the panel and the run goes together quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClear views.\u003c\/strong\u003e 10mm clear glass keeps the view from a terrace, balcony or stair open while still forming a barrier, and needs only a wipe to keep it clean.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eGlass balustrades with round stainless posts and clamps on garden terraces, decking and patios, balconies, landings and stairs, and as screens round pools and seating areas, in homes, hotels, pubs and offices.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne toughened glass panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1000 x 900mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass\u003c\/th\u003e\n\u003ctd\u003eClear toughened safety glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEdges\u003c\/th\u003e\n\u003ctd\u003ePolished all round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eInfill between stainless balustrade posts with glass clamps, under a handrail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHoles\u003c\/th\u003e\n\u003ctd\u003eNot published for this panel; clamps grip the glass edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 23.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eOther glass panels\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003ePanel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e10mm toughened, 1000 x 900mm\u003c\/td\u003e\n\u003ctd\u003eThis panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10mm toughened, 1000 x 1024mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-toughened-glass-panel-1000mm-x-1024mm\"\u003eToughened glass panel 1000 x 1024mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11.5mm toughened laminated, 985 x 1005mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/toughened-laminated-glass-panel-985mm-x-1005mm\"\u003eLaminated glass panel 985 x 1005mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat else you need\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eWhere\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMid post with clamps, 42.4mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/304-stainless-steel-balustrade-mid-post\"\u003e304 stainless balustrade mid post 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMid post kit, 42.4mm, grade 316\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-glass-balustrade-kit-mid-post-42-4mm\"\u003e316 glass balustrade mid post kit for 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMid post kit, 48.3mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-glass-balustrade-kit\"\u003eGlass balustrade mid post kit for 48.3mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtra clamps, 48.3mm posts\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/square-glass-clamp-45x45x27mm\"\u003e316 square glass clamp for 48.3mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtra clamps, 42.4mm posts\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/square-type-glass-clamp-55mm\"\u003e316 square glass clamp for 42.4mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne panel for each gap between two posts. A run of three panels needs four posts: two end posts and two mid posts, with two clamps on each side of every post that holds glass. Allow a gap of about 20 to 40mm between the glass edge and each post, as set by your clamps, so measure post centres as the panel width plus the post and both gaps.\u003c\/p\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eUse this 1000 x 900mm panel under a handrail, where the posts and rail carry the barrier height above the glass, and the 1000 x 1024mm panel where you want a taller glass line. For barriers with no handrail, or where a falling panel could hurt someone below, your designer or Building Control may ask for laminated glass; choose the 11.5mm toughened laminated panel. Check the height your barrier must reach before ordering: posts and handrail make up the rest above the glass.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eFix the posts and the bottom clamps first, level and in line. Set the glass on the rubber pads of the bottom clamps with packers under it, fit the top clamps, check the panel is plumb and the gaps are even, then tighten the clamp screws evenly. Toughened glass cannot be cut, drilled or ground on site, and a knock on the edge can shatter it, so handle it upright on a padded surface and never stand it on a hard edge. Clean with warm soapy water or glass cleaner.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one panel?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one 1000 x 900mm panel, 10mm thick. Posts and clamps are sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I cut it to size?\u003c\/summary\u003e\u003cp\u003eNo. Toughened glass cannot be cut, drilled or ground after toughening. Plan your posts round the panel size.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich clamps does it need?\u003c\/summary\u003e\u003cp\u003eClamps with rubber pads for 10mm glass. The square and D clamps on this site for 8 to 12mm glass suit it.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go outside?\u003c\/summary\u003e\u003cp\u003eYes. Toughened glass is used outdoors on terraces, decks and balconies.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. Glass is heavy and fragile, so for several panels or a full balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm delivery to your address before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57952062374275,"sku":"SSHF-999363-01","price":266.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/toughened-glass-panel-1000-x-900mm-10mm-clear-polished-edges-for-post-in-use.jpg?v=1794162774"},{"product_id":"premium-plastic-handrail-capping-50mm-x-8mm","title":"Anthracite Grey PVC Handrail Capping 50mm x 8mm, 25m Coil for Steel Flat Bar","description":"\u003cp\u003e\u003cstrong\u003eA dark anthracite grey handrail that matches modern windows and cladding.\u003c\/strong\u003e This dark anthracite grey PVC capping is made for 50mm x 8mm steel flat bar. Warm it, hook it over the top rail and press it down: the curled rims grip under both edges of the bar and the capping shrinks tight as it cools. You get one continuous 25 metre coil, enough for long runs of railing with no joins. The surface resists scratches, stains and knocks, and the colour does not fade. The price shown is for one 25m coil, which works out at about £35.44 a metre including VAT.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/anthracite-grey-pvc-handrail-capping-50x8-size-guide.jpg?width=1200\" alt=\"Size guide drawing showing anthracite grey PVC handrail capping clipped over a 50mm x 8mm steel flat bar, with the range of sizes\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy cap a flat bar handrail\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eComfortable to hold.\u003c\/strong\u003e A domed PVC top is warmer and kinder to the hand than bare steel, which is cold in winter and hot in summer sun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe modern architectural colour.\u003c\/strong\u003e Anthracite grey is the dark grey used on modern windows, doors and cladding, so the handrail ties in with the building. It hides marks and wear better than lighter colours and keeps its colour outdoors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo more painting the top rail.\u003c\/strong\u003e The capping covers the part of a railing that wears and chips most, and wipes clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne piece, no joins.\u003c\/strong\u003e A full 25m coil lets you cap long ramps and multi-flight stairs in one run, round bends included.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eModern offices, apartments, schools and retail parks; balustrades beside anthracite windows, doors and cladding; grey and black painted railings. It suits railings indoors and out.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne continuous 25 metre coil of anthracite grey PVC handrail capping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003e50mm wide x 8mm thick steel flat bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile size\u003c\/th\u003e\n\u003ctd\u003e60mm wide x 18.5mm high outside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eDark anthracite grey, like RAL 7016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eThermoplastic PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoil weight\u003c\/th\u003e\n\u003ctd\u003eAbout 17.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eScratch, abrasion and stain resistant, colour fast, shock resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting\u003c\/th\u003e\n\u003ctd\u003eWarmed to about 75°C, pressed over the bar, shrinks tight as it cools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTightest bend\u003c\/th\u003e\n\u003ctd\u003e100mm inside radius (twice the bar width)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJoints and ends\u003c\/th\u003e\n\u003ctd\u003eHeat welded with a welding blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eIndoor and outdoor railings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow much do you need?\u003c\/h2\u003e\n\u003cp\u003eMeasure along the top of the flat bar, following any bends and returns, and add a little for trimming. One coil covers:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eJob\u003c\/th\u003e\n\u003cth\u003eRuns from one 25m coil\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRamp or stair rails 4m long\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRailing panels 2m long\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne continuous balustrade\u003c\/td\u003e\n\u003ctd\u003eUp to 25m with no joins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eChoosing the right size and colour\u003c\/h2\u003e\n\u003cp\u003eMatch the capping to the width of your flat bar. This coil is for 50mm bar. Anthracite Grey capping also comes for \u003ca href=\"\/products\/plastic-handrail-capping-40mm-x-8mm-25m-coil\"\u003e40mm x 8mm\u003c\/a\u003e flat bar.\u003c\/p\u003e\n\u003cp\u003eThe 50mm x 8mm size is made in 12 colours: \u003ca href=\"\/products\/plastic-handrail-capping-50mm-x-8mm-25m-coil\"\u003eblack\u003c\/a\u003e, \u003ca href=\"\/products\/premium-handrail-capping-50mm-x-8mm-white-25m-coil\"\u003ewhite\u003c\/a\u003e, \u003ca href=\"\/products\/premium-50mm-x-8mm-plastic-handrail-capping-grey\"\u003egrey\u003c\/a\u003e, anthracite grey (this coil), \u003ca href=\"\/products\/premium-plastic-handrail-capping-white-25m\"\u003ewhite aluminium\u003c\/a\u003e, \u003ca href=\"\/products\/premium-plastic-handrail-capping-blue-25m-coil\"\u003eblue\u003c\/a\u003e, \u003ca href=\"\/products\/premium-plastic-handrail-capping-50mm-x-8mm-1\"\u003esapphire blue\u003c\/a\u003e, \u003ca href=\"\/products\/premium-plastic-handrail-capping-red-25m\"\u003ered\u003c\/a\u003e, \u003ca href=\"\/products\/plastic-handrail-capping-25m-coil\"\u003ewine red\u003c\/a\u003e, \u003ca href=\"\/products\/plastic-handrail-capping-green-25m-coil\"\u003egreen\u003c\/a\u003e, \u003ca href=\"\/products\/premium-plastic-handrail-capping-gold-25m-coil\"\u003egold\u003c\/a\u003e and \u003ca href=\"\/products\/premium-plastic-handrail-capping-25m-coil-3\"\u003ebrown\u003c\/a\u003e. See them all in \u003ca href=\"\/collections\/handrail-capping\"\u003ehandrail capping\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eClean the flat bar and remove sharp burrs and weld spatter from the edges. Uncoil the capping and warm it to about 75°C with a hot air gun; for short lengths, hot water also works. Starting at one end, open the rims, hook the capping over the bar and press it down by hand, warming a short way ahead as you go. On bends, warm the capping longer and stretch it slightly on the outside of the bend so the inside does not wrinkle; hold it with masking tape until it cools. Joints and end caps are welded with a hot welding blade: press the cut ends to the blade until they melt, push them together for at least ten seconds, let the seam cool, then trim and file it smooth. In cold weather, keep the coil indoors overnight before fitting.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWipe with warm soapy water. Do not use solvent cleaners or thinners, as they soften PVC. Check the ends and joints once a year on busy stairs.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for the whole coil?\u003c\/summary\u003e\u003cp\u003eYes. The price is for one continuous 25 metre coil, about £35.44 a metre including VAT.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit a round tube handrail?\u003c\/summary\u003e\u003cp\u003eNo. This capping is made to clip over 50mm x 8mm flat bar. Round tube rails need a different product.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill 50 x 8 capping fit 50 x 10 or 50 x 6 flat bar?\u003c\/summary\u003e\u003cp\u003eIt is made for 8mm thick bar. If your bar is thinner or thicker, call us with its size before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it go round bends and corners?\u003c\/summary\u003e\u003cp\u003eYes. Warmed capping follows bends down to a 100mm inside radius. Sharp corners and mitres are cut and heat welded.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outside?\u003c\/summary\u003e\u003cp\u003eYes. It is used on outdoor ramp and stair railings and the colour does not fade.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow big is the capping itself?\u003c\/summary\u003e\u003cp\u003eThe 50mm profile is 60mm wide and 18.5mm high outside, with an 8mm slot that takes a 50mm flat bar.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need special tools?\u003c\/summary\u003e\u003cp\u003eA hot air gun is enough to fit straight runs and bends. Welded joints and end caps need a PVC welding blade.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For several colours, long runs or a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm stock and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57945870926211,"sku":"SSHF-539459-01","price":885.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/anthracite-grey-pvc-handrail-capping-50x8-apartment-ramp.jpg?v=1794076603"},{"product_id":"plastic-handrail-capping-40mm-x-8mm-25m-coil","title":"Premium Plastic Handrail Capping 40mm x 8mm in Anthracite Grey - 25m Coil for Enhanced Staircase Safety","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis Premium Plastic Handrail Capping in Anthracite Grey, measuring 40mm x 8mm and available in a 25m coil, is the ideal choice for enhancing the safety and aesthetics of any staircase. Its robust design not only meets the requirements of the Disability Discrimination Act for ramped access but also provides a stylish finish that complements various decor styles.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScratch and abrasion resistant\u003c\/li\u003e\n\u003cli\u003eStain-resistant for easy cleaning\u003c\/li\u003e\n\u003cli\u003eEasy to maintain and long-lasting\u003c\/li\u003e\n\u003cli\u003eColor fast, ensuring it retains its rich hue over time\u003c\/li\u003e\n\u003cli\u003eErgonomic design for comfortable handling\u003c\/li\u003e\n\u003cli\u003eShock-resistant for added durability\u003c\/li\u003e\n\u003cli\u003eEconomical choice for quality and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions \u0026amp; Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 20px 0;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f8f9fa; border-bottom: 2px solid #dee2e6;\"\u003e\n\u003cth style=\"padding: 12px; text-align: left; border: 1px solid #dee2e6;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding: 12px; text-align: left; border: 1px solid #dee2e6;\"\u003eMeasurement\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dee2e6;\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dee2e6;\"\u003e25m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dee2e6;\"\u003eWidth\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dee2e6;\"\u003e40mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dee2e6;\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #dee2e6;\"\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid rgb(222, 226, 230);\"\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid rgb(222, 226, 230);\"\u003e\u003cspan\u003e12.0 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid rgb(222, 226, 230);\"\u003e\u003cspan\u003eDepth\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid rgb(222, 226, 230);\"\u003e\u003cspan\u003e8.0mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid rgb(222, 226, 230);\"\u003e\u003cspan\u003eMaterial size\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid rgb(222, 226, 230);\"\u003e\u003cspan\u003e40x8mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cp\u003eThis handrail capping not only enhances the visual appeal of your staircase but also ensures safety compliance with its durable and ergonomic design. The combination of scratch resistance and shock resistance makes it a long-lasting option for both residential and commercial applications.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003e1. Is this handrail capping suitable for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eYes, the material used is designed to withstand outdoor conditions while maintaining its integrity and color.\u003c\/p\u003e\n\u003ch3\u003e2. Can this be installed without professional help?\u003c\/h3\u003e\n\u003cp\u003eWhile it can be installed without professional help, we recommend hiring experienced fitters for the best results.\u003c\/p\u003e\n\u003ch3\u003e3. How do I clean the handrail capping?\u003c\/h3\u003e\n\u003cp\u003eSimply use a damp cloth with mild detergent to clean the surface; it is designed to be stain-resistant and easy to maintain.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Length: 25000mm x Width: 40mm x Thick: 8mm","offer_id":57945843532163,"sku":"PHAN4","price":504.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/edfaef26e3bafab80ccec027786e6c74.png?v=1766930812"},{"product_id":"premium-mezzanine-handrail-square-post","title":"Galvanised Mezzanine Handrail Post, 40mm Square, Takes 25mm Square Rails, 1140mm High","description":"\u003cp\u003e\u003cstrong\u003eA simple, strong post for mezzanine and platform guard rails.\u003c\/strong\u003e This hot-dip galvanised 40mm square box section post has two holes at 550mm centres that the 25mm square box section top rail and knee rail pass straight through, each locked with M8 grub screws. It stands 1140mm high when fitted on its base. Fix it on a base fitting, slide the rails through and the guard rail is up with no fittings at the rail joints. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-mezzanine-handrail-post-40mm-square-25mm-rails-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the 40mm square post for 25mm square rails, holes at 550mm centres\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRails pass straight through.\u003c\/strong\u003e No clamps on the rails, so the guard rail looks clean and leaves nothing to catch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo-rail layout.\u003c\/strong\u003e Top rail and knee rail at 550mm centres, the usual mezzanine layout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised.\u003c\/strong\u003e Hot-dip galvanised inside and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick to build.\u003c\/strong\u003e Base, post, rails, grub screws.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eMezzanine floor edges, raised platforms, plant decks, loading docks and racking walkways in warehouses, factories and distribution centres.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSection\u003c\/th\u003e\n\u003ctd\u003e40 x 40 x 2.5mm square box section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1140mm finished height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRail holes\u003c\/th\u003e\n\u003ctd\u003e2, for 25mm square box section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e550mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eM8 grub screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.25kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eBase fitting, rails and top cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhat else you need\u003c\/h2\u003e\n\u003cp\u003eA base fitting for each post, the rails, and a top cap. For a 40mm square post use a rectangular base for 40mm box section. Check the post spacing and loads for your floor with your designer.\u003c\/p\u003e\n\u003ch2\u003eRelated parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-square-key-clamp-for-40mm-box-section\"\u003eRectangular base for 40mm box section\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-mezzanine-handrail-post-40mm-square\"\u003e40mm square post for 33.7mm round rails\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/square-key-clamp-handrail-bracket\"\u003eSquare bracket to fix a 25mm rail to a wall\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the posts along the floor edge. Fit each post into its base and fix the base to the floor. Slide the top rail and knee rail through the holes in every post, set them level, and tighten the M8 grub screws. Fit a cap to the top of each post.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Check the grub screws once a year and after any impact, and touch in cut or drilled steel with cold galvanising paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one post?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised post.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the base and cap included?\u003c\/summary\u003e\u003cp\u003eNo. The base fitting, rails and cap are sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the rails join inside a post?\u003c\/summary\u003e\u003cp\u003eRails should join between posts with a joint fitting, or run unbroken through the posts.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail or larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57945140527491,"sku":"SSHF-286211-01","price":42.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-mezzanine-handrail-post-40mm-square-25mm-rails-platform.jpg?v=1794080181"},{"product_id":"premium-mezzanine-handrail-post-40mm-square","title":"Galvanised Mezzanine Handrail Post, 40mm Square, Takes 33.7mm Round Rails, 1140mm High","description":"\u003cp\u003e\u003cstrong\u003eA simple, strong post for mezzanine and platform guard rails.\u003c\/strong\u003e This hot-dip galvanised 40mm square box section post has two holes at 550mm centres that the 33.7mm round tube top rail and knee rail pass straight through, each locked with M8 grub screws. It stands 1140mm high when fitted on its base. Fix it on a base fitting, slide the rails through and the guard rail is up with no fittings at the rail joints. The price shown is for one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-mezzanine-handrail-post-40mm-square-33mm-rails-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the 40mm square mezzanine post, rail holes at 550mm centres, 1140mm high\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRails pass straight through.\u003c\/strong\u003e No clamps on the rails, so the guard rail looks clean and leaves nothing to catch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo-rail layout.\u003c\/strong\u003e Top rail and knee rail at 550mm centres, the usual mezzanine layout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised.\u003c\/strong\u003e Hot-dip galvanised inside and out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick to build.\u003c\/strong\u003e Base, post, rails, grub screws.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eMezzanine floor edges, raised platforms, plant decks, loading docks and racking walkways in warehouses, factories and distribution centres.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne galvanised post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSection\u003c\/th\u003e\n\u003ctd\u003e40 x 40 x 2.5mm square box section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e1140mm finished height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRail holes\u003c\/th\u003e\n\u003ctd\u003e2, for 33.7mm round tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole centres\u003c\/th\u003e\n\u003ctd\u003e550mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eM8 grub screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHot-dip galvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.15kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eBase fitting, rails and top cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhat else you need\u003c\/h2\u003e\n\u003cp\u003eA base fitting for each post, the rails, and a top cap. For a 40mm square post use a rectangular base for 40mm box section. Check the post spacing and loads for your floor with your designer.\u003c\/p\u003e\n\u003ch2\u003eRelated parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-square-key-clamp-for-40mm-box-section\"\u003eRectangular base for 40mm box section\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/mezzanine-handrail-post-48-3mm\"\u003e48.3mm round post for 33.7mm round rails\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/premium-mezzanine-handrail-square-post\"\u003e40mm square post for 25mm square rails\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eSet out the posts along the floor edge. Fit each post into its base and fix the base to the floor. Slide the top rail and knee rail through the holes in every post, set them level, and tighten the M8 grub screws. Fit a cap to the top of each post.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eGalvanising needs no painting. Check the grub screws once a year and after any impact, and touch in cut or drilled steel with cold galvanising paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one post?\u003c\/summary\u003e\u003cp\u003eYes, one galvanised post.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the base and cap included?\u003c\/summary\u003e\u003cp\u003eNo. The base fitting, rails and cap are sold separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the rails join inside a post?\u003c\/summary\u003e\u003cp\u003eRails should join between posts with a joint fitting, or run unbroken through the posts.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail or larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57945098682755,"sku":"SSHF-318979-01","price":51.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/galvanised-mezzanine-handrail-post-40mm-square-33mm-rails-mezzanine.jpg?v=1794080146"},{"product_id":"heavy-duty-corner-base-plate-150-x-150mm","title":"Corner Handrail Post Base Plate 150 x 150 x 12mm, L-Shape Mild Steel","description":"\u003cp\u003e\u003cstrong\u003eA base plate made for posts at corners.\u003c\/strong\u003e This 12mm mild steel plate is L-shaped, 150mm along each outside edge with 75mm arms, so it fits tight into the corner of a slab, dock or platform where a square plate would overhang. Weld a tubular handrail post to it and bolt it down through its two 14mm holes and one 22mm hole. Plain steel, ready to weld, paint or galvanise. The price shown is for one plate, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/corner-handrail-post-base-plate-150x150x12-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the 150 x 150 x 12mm corner base plate with 75mm arms\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy choose it\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFits corners.\u003c\/strong\u003e The L shape sits into a corner without overhanging the edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick and rigid.\u003c\/strong\u003e 12mm steel keeps a corner post firm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to weld.\u003c\/strong\u003e Plain mild steel welds cleanly to tube and box section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHoles drilled.\u003c\/strong\u003e Two 14mm and one 22mm fixing holes.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCorner posts on loading docks, platforms, ramps and slab edges; balustrade and guard rail corners in steel fabrication.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne corner base plate, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e150 x 150mm overall, L-shape with 75mm arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHoles\u003c\/th\u003e\n\u003ctd\u003e2 x 14mm and 1 x 22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMild steel, raw (self colour)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.66kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRelated parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/rectangular-base-fixing-plate-150-x-65-x-12mm\"\u003eRectangular base plate 150 x 65 x 12mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/rectangular-fixing-plate-200-x-65-x-12mm\"\u003eRectangular base plate 200 x 65 x 12mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/dc-iron-handrails-brackets\"\u003eHandrails \u0026amp; Brackets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eClean the mill scale off the weld area, set the post on the plate and weld all round. Paint, powder coat or galvanise the post and plate together. Set the plate into the corner, mark through the holes, drill and fix with anchors or bolts to suit.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eRaw steel will rust if left bare, so paint, powder coat or galvanise after welding and touch up chips outdoors.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one plate?\u003c\/summary\u003e\u003cp\u003eYes, one plate. The minimum order is 5.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. Choose anchors or bolts to suit the concrete or steel.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it galvanised?\u003c\/summary\u003e\u003cp\u003eNo, it is plain mild steel so it welds cleanly. Galvanise or paint it after welding.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online with Express UK Delivery. For a full guard rail or larger quantities, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57944634720643,"sku":"SSHF-465859-01","price":13.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/corner-handrail-post-base-plate-150x150x12-dock.jpg?v=1794080074"},{"product_id":"premium-plastic-end-cap-handrail-fitting","title":"Yellow GRP Handrail End Cap for 50mm Tube, Flush Push-In Plastic Cap for 5mm Wall","description":"\u003cp\u003e\u003cstrong\u003eThe finishing piece for every open end on a yellow GRP handrail.\u003c\/strong\u003e This safety yellow plastic cap knocks into the end of 50mm GRP tube with a 5mm wall. Ribbed fins grip the bore and the 50mm head sits flush with the outside of the tube, so the rail end is smooth to the hand, matches the rail and keeps out water, dirt and nesting insects. The price shown is for one cap, with a minimum order of 10.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-end-cap-50mm-size-guide.jpg?width=1200\" alt=\"Dimension drawing of the yellow GRP handrail end cap: 50mm head for 50mm tube with a 5mm wall\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy fit end caps\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSafer rail ends.\u003c\/strong\u003e A cut tube end has a sharp edge; a capped end is smooth to hands and clothing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKeeps the tube clean.\u003c\/strong\u003e Stops rain, grit and insects getting inside the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlush and matching.\u003c\/strong\u003e The head is the same 50mm diameter and the same yellow as the tube, so it looks finished.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick to fit.\u003c\/strong\u003e No glue or tools beyond a soft mallet.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eEvery open tube end on yellow GRP guard rails and handrails: the ends of top and knee rails, the tops of posts, at water and wastewater treatment works, chemical plants, rail depots, food factories and electrical sites.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne end cap, minimum order 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e50mm outside diameter GRP handrail tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTube wall\u003c\/th\u003e\n\u003ctd\u003e5mm (40mm bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCap head\u003c\/th\u003e\n\u003ctd\u003e50mm diameter, flush with the tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003ePush-in, ribbed fins, no glue needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSafety yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.01kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eHow many do you need?\u003c\/h2\u003e\n\u003cp\u003eOne for every open tube end: usually two per run of rail (top and knee rail each end) plus one for the top of any post that is not closed by a fitting.\u003c\/p\u003e\n\u003ch2\u003eBuilding a complete GRP guard rail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTube: \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm-5000mm\"\u003e5000mm lengths\u003c\/a\u003e or \u003ca href=\"\/products\/premium-grp-handrail-tube-50mm\"\u003e3500mm lengths\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLevel runs: \u003ca href=\"\/products\/premium-grp-handrail-fitting-short-tee\"\u003eshort tee\u003c\/a\u003e and \u003ca href=\"\/products\/premium-grp-handrail-fitting-mid-rail-cross\"\u003emid rail cross\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eStairs: \u003ca href=\"\/products\/premium-grp-handrail-fitting-60-degree-short-tee\"\u003e60 degree short tee\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFeet: \u003ca href=\"\/products\/premium-grp-handrail-fitting-1\"\u003etriangular base flange\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThin wall tube (1 to 3mm): \u003ca href=\"\/products\/premium-grp-handrail-end-cap\"\u003eend cap for thin wall tube\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSee the whole range in \u003ca href=\"\/collections\/sc-grp-handrail\"\u003eGRP handrail\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eCut the tube end square and remove any loose fibres. Push the cap into the bore and tap it home with a soft mallet until the head sits tight against the tube end.\u003c\/p\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eWash down with the rest of the rail using water and mild detergent. Replace any cap that is knocked out or damaged.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one cap?\u003c\/summary\u003e\u003cp\u003eYes, one end cap. The minimum order is 10.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit steel tube?\u003c\/summary\u003e\u003cp\u003eIt is sized for 50mm GRP tube with a 5mm wall. Steel tube has a different bore, so the cap will not grip properly.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eMy GRP tube has a thinner wall. Which cap do I need?\u003c\/summary\u003e\u003cp\u003eFor 1 to 3mm wall tube, use the \u003ca href=\"\/products\/premium-grp-handrail-end-cap\"\u003ethin wall end cap\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 10 or more online with Express UK Delivery. For a full GRP guard rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk with a sketch and we will list every tube, fitting and cap you need.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":57942601105795,"sku":"SSHF-357187-01","price":3.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/yellow-grp-handrail-end-cap-50mm-treatment-works.jpg?v=1794068034"}],"url":"https:\/\/industrialsuppliesco.co.uk\/collections\/iron-hardware-handrails-brackets.oembed","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}