{"title":"Car Park Access Barriers","description":"\u003cp\u003eManual arm barriers and accessories for controlling vehicle access to car parks, yards and private roads, including catch posts and locking pins. Cast-in and bolt-down options.\u003c\/p\u003e","products":[{"product_id":"manual-arm-barrier-car-park-access-3m-7m","title":"Manual Arm Barrier for Car Parks, Counterweighted Hand-Operated Access Barrier, 3m to 7m Drivable Width, Cast In or Bolt Down","description":"\u003cp\u003eIf you need to close a car park, service road or yard entrance outside working hours without paying for an automatic barrier, a manual arm barrier is the straightforward answer. This hand-operated, counterweighted barrier lifts with one hand, locks down across the opening when the site is shut and locks up out of the way when traffic needs to flow. It suits facilities and site managers who want controlled access with no power supply or service contract. Choose the drivable width that matches your opening, from 3000mm to 7000mm, and either a cast-in or bolt-down fixing to suit the ground.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eCounterweighted for one-person operation\u003c\/h3\u003e\n\u003cp\u003eThe boom pivots on a head mounted on a single pedestal, with a counterweighted tail and grab handle behind the pivot. Because the boom is balanced by the tail, one person can raise and lower it by hand. There is nothing electrical to fail.\u003c\/p\u003e\n\u003ch3\u003eGalvanised steel under the colour\u003c\/h3\u003e\n\u003cp\u003eThe pedestal and head are galvanised mild steel, powder coated red as standard. The galvanising protects the steel where the paint gets chipped, which matters on an exposed entrance. The aluminium boom is light to lift and does not rust.\u003c\/p\u003e\n\u003ch3\u003eLockable in both positions\u003c\/h3\u003e\n\u003cp\u003eThe barrier can be locked in the lowered position to keep vehicles out, and in the raised position so the boom cannot drop onto traffic during opening hours. The red and white banded boom is easy for drivers to see.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHand-operated, counterweighted, no power needed\u003c\/li\u003e\n\u003cli\u003eGalvanised steel body, aluminium boom\u003c\/li\u003e\n\u003cli\u003eLockable raised and lowered; made in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eBusiness park and staff car parks, industrial unit yards, service roads, depots and private access roads: anywhere access only needs restricting at certain times, such as overnight or at weekends, rather than vehicle by vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOperation\u003c\/th\u003e\n\u003ctd\u003eManual (hand-operated), counterweighted tail with grab handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrivable width options\u003c\/th\u003e\n\u003ctd\u003e3000mm to 7000mm in 500mm steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003eApprox. 1200mm (1231mm to top of handle on the drawing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoom height when lowered\u003c\/th\u003e\n\u003ctd\u003eApprox. 996mm above ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTail length behind pedestal\u003c\/th\u003e\n\u003ctd\u003e669mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall length\u003c\/th\u003e\n\u003ctd\u003eBoom length + 1000mm minimum (includes clearance to pivot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody material and finish\u003c\/th\u003e\n\u003ctd\u003eGalvanised mild steel, powder coated red as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoom\u003c\/th\u003e\n\u003ctd\u003eAluminium, red and white bands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoom and post tube sizes\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eLockable in the raised and lowered positions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCast-in fixing\u003c\/th\u003e\n\u003ctd\u003eRagged foot, concreted 600mm below ground; excavated hole no less than 600mm cube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt-down fixing\u003c\/th\u003e\n\u003ctd\u003eFlanged base plate, four M16 bolts per leg into concrete no less than 600mm cube; bolts not supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (3m \/ 4m \/ 5m \/ 6m \/ 7m boom)\u003c\/th\u003e\n\u003ctd\u003eBolt down 48 \/ 52 \/ 56 \/ 69 \/ 75kg; cast in 46 \/ 50 \/ 54 \/ 67 \/ 73kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied\u003c\/th\u003e\n\u003ctd\u003eBarrier pedestal, counterweighted head and boom. Support post and fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGuarantee\u003c\/th\u003e\n\u003ctd\u003e12 months, if installed and used correctly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDrivable width:\u003c\/strong\u003e measure the clear opening vehicles drive through and choose the width that covers it. The pedestal and tail sit beside the opening, so allow at least the boom length plus 1000mm overall, including clearance to the pivot. One barrier covers up to 7000mm. For wider roads, ask us about a double-span arrangement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFixing:\u003c\/strong\u003e choose \u003cem\u003eCast In (ragged)\u003c\/em\u003e for new groundworks, soft ground or tarmac. The foot is concreted into an excavated hole 600mm deep. Choose \u003cem\u003eBolt Down\u003c\/em\u003e only where there is a sound concrete base of at least 600mm cube to take four M16 anchors. Do not bolt into tarmac, which cannot hold the fixings under the leverage of a long boom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccessories:\u003c\/strong\u003e a matching support (catch) post for the end of the boom is available separately. The barrier can also be locked at the catch post using a swing gate barrier locking pin, also sold separately. Red is the standard colour. Call us before ordering if you need a different RAL colour.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eSet the pedestal so the boom closes square across the opening, with the tail clear of footpaths. For cast-in units, excavate, set the foot plumb and haunch it in concrete, then let it cure fully before using the boom. For bolt-down units, use four M16 anchors per leg suited to your concrete. Put up suitable signs so drivers know the obstruction is there. Check the fixings and pivot periodically and touch up paint damage.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I bolt it down onto tarmac?\u003c\/h3\u003e\n\u003cp\u003eNo. The bolt-down version needs a suitable concrete surface of at least 600mm cube. On tarmac, choose the cast-in version and excavate a hole for it, or lay a concrete pad first.\u003c\/p\u003e\n\u003ch3\u003eAre the fixing bolts included?\u003c\/h3\u003e\n\u003cp\u003eNo. The bolt-down version is supplied without fixing-down bolts. You will need four M16 anchors per leg, chosen to suit your concrete. The cast-in version is set in concrete instead.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with a post for the end of the boom?\u003c\/h3\u003e\n\u003cp\u003eNo. A matching support or catch post is sold separately.\u003c\/p\u003e\n\u003ch3\u003eCan I get it in another colour?\u003c\/h3\u003e\n\u003cp\u003eRed powder coat is standard. Other RAL colours can be made to order. Call or email us with the RAL number before you order.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eEach barrier is made to order, so check your width and fixing type carefully before ordering. Returns on made-to-order items are restricted. For help with sizing, colours or accessories, call 01744 520110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Cast In (ragged) \/ 3000mm","offer_id":63317862908291,"sku":"ISC-MAB-CI-3000","price":1703.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 3500mm","offer_id":63317862941059,"sku":"ISC-MAB-CI-3500","price":1749.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 4000mm","offer_id":63317862973827,"sku":"ISC-MAB-CI-4000","price":1806.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 4500mm","offer_id":63317863006595,"sku":"ISC-MAB-CI-4500","price":1841.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 5000mm","offer_id":63317863039363,"sku":"ISC-MAB-CI-5000","price":1898.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 5500mm","offer_id":63317863072131,"sku":"ISC-MAB-CI-5500","price":1956.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 6000mm","offer_id":63317863104899,"sku":"ISC-MAB-CI-6000","price":2151.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 6500mm","offer_id":63317863137667,"sku":"ISC-MAB-CI-6500","price":2220.9,"currency_code":"GBP","in_stock":true},{"title":"Cast In (ragged) \/ 7000mm","offer_id":63317863170435,"sku":"ISC-MAB-CI-7000","price":2289.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 3000mm","offer_id":63317863203203,"sku":"ISC-MAB-BD-3000","price":1703.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 3500mm","offer_id":63317863235971,"sku":"ISC-MAB-BD-3500","price":1749.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 4000mm","offer_id":63317863268739,"sku":"ISC-MAB-BD-4000","price":1806.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 4500mm","offer_id":63317863301507,"sku":"ISC-MAB-BD-4500","price":1841.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 5000mm","offer_id":63317863334275,"sku":"ISC-MAB-BD-5000","price":1898.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 5500mm","offer_id":63317863367043,"sku":"ISC-MAB-BD-5500","price":1956.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 6000mm","offer_id":63317863399811,"sku":"ISC-MAB-BD-6000","price":2151.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 6500mm","offer_id":63317863432579,"sku":"ISC-MAB-BD-6500","price":2220.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down \/ 7000mm","offer_id":63317863465347,"sku":"ISC-MAB-BD-7000","price":2289.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/manual-arm-barrier-bolt-down-car-park-entrance.jpg?v=1794994806"},{"product_id":"barrier-locking-pin-t-handle-manual-swing-arm-barrier","title":"Barrier Locking Pin with T-Handle for Manual Swing Arm Barrier Catch Posts, Padlockable","description":"\u003cp\u003eA manual swing arm barrier only controls access when it is locked. Left unsecured, anyone can lift the boom out of its catch post and swing it open. This T-handle locking pin closes that gap. It slides across the cradle at the top of the catch post, directly above the lowered boom, and a padlock through the hole at its tip holds it there. It is the catch-post locking accessory for manual swing arm barriers used at car parks, yards and private roads, and it is sold on its own for new installations, replacements and barriers that were first fitted without a lock.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eIt traps the boom, not just the post\u003c\/h3\u003e\n\u003cp\u003eThe catch post on this type of barrier has a U-shaped cradle that the boom drops into when it closes. The pin passes through holes in both cheeks of that cradle, so once it is in place the boom cannot be lifted out. The barrier stays shut until the keyholder removes the padlock and draws the pin.\u003c\/p\u003e\n\u003ch3\u003eSimple to use, hard to lose track of\u003c\/h3\u003e\n\u003cp\u003eThe T-handle gives a full-hand grip, which makes it easy to push home or pull out in the cold or with gloves on. A collar behind the handle stops the pin at the near cheek, so it always seats in the same position and the padlock hole lines up on the far side.\u003c\/p\u003e\n\u003ch3\u003eWorks with the padlock you choose\u003c\/h3\u003e\n\u003cp\u003eNo padlock is included, which lets you match the lock to the site: keyed alike with your other barriers and posts, a master-keyed system, or a closed-shackle lock for higher-risk locations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLocks the boom into the catch post cradle\u003c\/li\u003e\n\u003cli\u003eT-handle for a firm grip\u003c\/li\u003e\n\u003cli\u003ePadlock hole at the tip (padlock not included)\u003c\/li\u003e\n\u003cli\u003eSupplied as a single pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eUse it wherever a manual swing arm barrier closes onto a cradle-type catch post: staff and customer car parks, depot and yard entrances, private access roads, farm and estate tracks, and housing association or residents' parking. It is a sensible spare for facilities teams who manage several barriers, as pins are easily lost or damaged once a site is in use.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eBarrier locking pin with T-handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eLocks a manual swing arm barrier boom into its catch post cradle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle\u003c\/th\u003e\n\u003ctd\u003eT-handle with collar (as pictured)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePadlock provision\u003c\/th\u003e\n\u003ctd\u003eHole at the pin tip. Padlock not included and required to lock the barrier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePin diameter\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePin length\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied as\u003c\/th\u003e\n\u003ctd\u003e1 pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eThis pin is made for a manual swing arm barrier whose catch post has a U-shaped cradle with a pin hole through each cheek, as shown in the photos. It is not a drop bolt or ground-socket pin, and it is not intended for domestic field gates or sliding gates.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer does not publish the pin's diameter or length. If you are fitting it to an existing barrier, measure the hole in the cradle cheeks and the distance across the outside of the cradle, then send us those measurements before ordering so we can confirm it fits. If you are buying a new manual arm barrier, ask for the catch post to be supplied ready for locking and order the pin with it.\u003c\/p\u003e\n\u003cp\u003eChoose a padlock with a shackle that passes freely through the tip hole. A closed or shrouded shackle gives more resistance to bolt croppers.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use \u0026amp; care\u003c\/h2\u003e\n\u003cp\u003eTo lock, lower the boom fully onto the rubber pad in the catch post cradle. Push the pin through the near cheek, across above the boom and out through the far cheek until the collar stops it. Then fit the padlock through the tip hole. To open, remove the padlock, draw the pin out and lift the boom clear.\u003c\/p\u003e\n\u003cp\u003eWipe the pin down and apply a light smear of grease now and then, especially in winter, so it slides freely. Store it somewhere obvious when the barrier is open, and replace it if it becomes bent or the tip hole is damaged.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs a padlock included?\u003c\/h3\u003e\n\u003cp\u003eNo. You need to provide a padlock to lock the barrier. That lets you key it alike with the rest of your site locks or use a higher-security closed-shackle padlock.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my existing barrier?\u003c\/h3\u003e\n\u003cp\u003eIt suits manual swing arm barriers whose catch post has a U-shaped cradle drilled through both cheeks. The pin dimensions are not published, so send us the cradle hole size and outside width and we will check before you order.\u003c\/p\u003e\n\u003ch3\u003eDoes it lock the barrier in the open position too?\u003c\/h3\u003e\n\u003cp\u003eThis pin locks the boom at the catch post when the barrier is closed. Ask us about the options for securing a barrier in the raised or open position.\u003c\/p\u003e\n\u003ch3\u003eCan I buy spares?\u003c\/h3\u003e\n\u003cp\u003eYes. It is sold as a single pin, so you can order as many as you need for a multi-barrier site or keep one in reserve.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering \u0026amp; delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online for UK delivery, or call our team on 01744 520110 or email sales@industrialsuppliesco.co.uk. We can help with fit checks, quantities for multi-barrier sites and trade accounts. Prices shown include VAT.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63317864022403,"sku":"ISC-BLP-TH-01","price":88.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/barrier-locking-pin-padlocked-in-catch-post-cradle.jpg?v=1794994810"},{"product_id":"manual-arm-barrier-catch-post-cast-in-bolt-down","title":"Barrier Catch Post for Manual Arm Barriers, Red Galvanised Steel Support Post with Rubber-Padded Cradle, Cast In or Bolt Down","description":"\u003cp\u003eA manual arm barrier is only as good as the post its boom lands on. This barrier catch post (also called a support arm or receiver post) stands on the far side of the opening and takes the free end of the boom when the barrier is closed. It stops a long aluminium arm sagging or bouncing in the wind. It is built for site managers, facilities teams and groundworkers fitting or replacing a swing arm barrier at a car park, yard or private road. Choose a cast-in version for new concrete or a bolt-down version for an existing slab.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eGalvanised first, then powder coated\u003c\/h3\u003e\n\u003cp\u003eThe post is galvanised mild steel with a red powder-coat finish on top. The zinc layer protects the steel if the paint is chipped by a wheel or a snow shovel. Other RAL colours can be made to order; give us the RAL or BS number when you ask for a price.\u003c\/p\u003e\n\u003ch3\u003eA cradle that holds the boom, not just a stop\u003c\/h3\u003e\n\u003cp\u003eThe top of the post is a U-shaped cradle with flared arms that guide the boom down into the U as it swings shut. A rubber pad lines the base of the cradle, so the arm lands on rubber rather than steel. That cuts noise and protects the boom's coating.\u003c\/p\u003e\n\u003ch3\u003eTwo-part post with a bolted sleeve\u003c\/h3\u003e\n\u003cp\u003eThe upper section sits in a sleeve on the lower post and is held by two bolts. Height is not published as adjustable, so treat the sleeve as part of the build and check your boom height before ordering (see the specification below).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanised mild steel with red powder coat\u003c\/li\u003e\n\u003cli\u003eRubber-padded U-cradle with flared guide arms\u003c\/li\u003e\n\u003cli\u003eCast-in (ragged foot) or bolt-down (4-hole base plate)\u003c\/li\u003e\n\u003cli\u003eOpen top as standard; lockable catch end available to order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eStaff and visitor car parks, depot and yard entrances, business park service roads, farm tracks and private roads that close out of hours. It is also bought to replace a receiver post that has been hit by a vehicle or rusted at ground level.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eCatch post \/ support arm (receiver post) for manual arm barriers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing options\u003c\/th\u003e\n\u003ctd\u003eCast In (ragged foot, no base plate) or Bolt Down (4-hole base plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGalvanised mild steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePowder coated red as standard; other RAL colours to order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoom support\u003c\/th\u003e\n\u003ctd\u003eU-shaped cradle with flared arms and rubber pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight to boom\u003c\/th\u003e\n\u003ctd\u003eApprox. 1034mm, ground to boom at the catch post (reference dimension from the manufacturer's barrier drawing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCast-in depth\u003c\/th\u003e\n\u003ctd\u003e600mm below ground is stated for the concrete-in barrier set; a separate catch post figure is not published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt-down fixing\u003c\/th\u003e\n\u003ctd\u003eManufacturer specifies four M16 bolts per leg into concrete; fixing bolts not supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocking\u003c\/th\u003e\n\u003ctd\u003eOpen top as standard (not lockable); lockable catch end available to order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePost section \/ base plate size\u003c\/th\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eManual arm barriers with booms from 3m to 7m, from the same barrier range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCast In (ragged)\u003c\/strong\u003e is the better choice when you're digging new foundations or the ground is tarmac or block paving over a sub-base. The ragged foot locks into the concrete and nothing at ground level can be undone. Plan on an excavated hole and a concrete pour; the barrier datasheet calls for at least a 600mm cube of concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Down\u003c\/strong\u003e suits an existing reinforced concrete slab or apron where you don't want to break out the surface. It is quicker to fit and easy to remove if the layout changes. It needs sound concrete under the plate and four M16 anchors, which are not included.\u003c\/p\u003e\n\u003cp\u003eIf you're replacing a post on another make of barrier, check the boom diameter and height first. Send us both before ordering and we'll confirm the fit.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use \u0026amp; care\u003c\/h2\u003e\n\u003cp\u003eSwing the barrier closed and mark where the boom end falls, so the cradle sits square under it. For cast-in, excavate, set the post plumb at the right height and pour; leave the concrete to cure before loading it. For bolt-down, drill for four M16 anchors in a concrete base of at least a 600mm cube, then shim to level and torque the anchors. Fit warning signs so drivers know the barrier is there. Check the rubber pad now and then and touch in any chips.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs the boom or barrier included?\u003c\/h3\u003e\n\u003cp\u003eNo. This listing is for the catch post only. The barrier, boom and fixing bolts are sold separately.\u003c\/p\u003e\n\u003ch3\u003eCan I padlock the barrier at this post?\u003c\/h3\u003e\n\u003cp\u003eThe standard post has an open top and is not lockable. A lockable catch end is available to order. Contact us for a price.\u003c\/p\u003e\n\u003ch3\u003eDoes the bolt-down version come with fixings?\u003c\/h3\u003e\n\u003cp\u003eNo. The manufacturer specifies four M16 bolts per leg into a suitable concrete base. Use anchors rated for your slab.\u003c\/p\u003e\n\u003ch3\u003eCan I have it in a different colour?\u003c\/h3\u003e\n\u003cp\u003eRed is standard. Other RAL or BS colours can be made to order. Send us the reference for a price.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering \u0026amp; delivery\u003c\/h2\u003e\n\u003cp\u003eChoose Cast In or Bolt Down above and add to basket. Prices shown include VAT. For trade accounts, larger orders, custom colours or a lockable catch end, call 01744 520110 or email sales@industrialsuppliesco.co.uk.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Cast In (ragged)","offer_id":63317870182787,"sku":"ISC-CPMAB-CI","price":221.9,"currency_code":"GBP","in_stock":true},{"title":"Bolt Down","offer_id":63317870215555,"sku":"ISC-CPMAB-BD","price":221.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/manual-arm-barrier-catch-post-bolt-down-yard-entrance.jpg?v=1794994901"}],"url":"https:\/\/industrialsuppliesco.co.uk\/collections\/car-park-access-barriers.oembed","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}